Error Message - Reference number of a document from Back Error

Hi,
I created proforma invoice but it is not transferred to GTS. I tried to transfer manually, status shows it is released but there is an error at the top saying 'Reference number of a document from Back Error'. When I checked it in GTS, there is no custom document for proforma invoice. I checked configuration in ECC as well as GTS regarding activation of BADis, document types etc. everything looks fine. Can you please help me where to look at it and get it solved?
Thanks in advance.

Hi Manohar,
Are you trying to create an Export Declaration? If so, is this the first time, or has it worked ok previously but failed this time?
In case it's the first time, have you made sure that:
The Billing Type is set for transfer to GTS?
The Billing Type is mapped in GTS?
The Item Category is mapped in GTS?
The proforma is actually an export (Shipping Point and Ship-to address not both in the EU)?
Do you see any related entries in Transaction SM58?
Do you see any related log entries in the GTS transfer log?
Regards,
Dave

Similar Messages

Field Customs reference number in material document

Hi Friends,
While doing GR am geting document number and can see that in MB03. Now in MKPF table there is field called Customs reference number( field name # GTS_CUSREF_NO) , and after putting material document number in MKPF am getting all the detail including Customs reference number.
Now my question is where can I see the detail of Customs Reference number in material document in t code (MB03).
Any pointers
Regards

No reply at all.
Rgds

Customs reference number( field name # GTS_CUSREF_NO) in material document

Hi Friends,
While doing GR am geting document number and can see that in MB03. Now in MKPF table there is field called Customs reference number( field name # GTS_CUSREF_NO) , and after putting material document number in MKPF am getting all the detail including Customs reference number.
Now my question is where can I see the detail of Customs Reference number in material document in t code (MB03).
Any pointers
Regards

no reply closing the thrd.

I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards Vicki

Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards Vicki

The trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser.

I am trying to send a text message from my iPad when I enter phone number I get error message phone number not registered with iMessages from contacts

When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.

TestnTag wrote:
When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.
The iPad is not capable of sending an SMS message so texts, pictures, etc., must go through iMessage. The destination device must be registered with the Apple servers by turning on iMessage. Therefore, the user with the iPhone must enable it for iMessage.

Reference number from MIRO not populated in PO History for IR document

Hi SAP Gurus,
We are on ECC 5.0
I have posted invoices through MIRO with the Reference field populated. When I go back to transaction ME23N and display the PO history, I expect to see the Reference number from MIRO for the invoice receipt document, but it shows as blank.
Does anyone know how this gets populated and if we're missing any config settings?
Thanks,
Linda

Make this flag for Account assignment category in the customization
SPRO -> Materials Managment -> Purchasing -> Account assignment -> Maintain A/c assignment category.
Select the relevent a/c assignment category and click on details button.
For PO with no account assignment
Make this flag for Account assignment category in the customization
SPRO -> Materials Managment -> Purchasing -> define external representation of Item category
If here the Invoice receipt indicator is not checked then you want see the IR document at PO history

External delivery number from VL3xN as reference in the material document

All,
I have the following situation. I need the external reference ID delivered by the supplier sent in an advanced shipping notification (ASN) to be copied over as the reference in the material document.
If you post the delivery with MIGO, the external reference is copied, if you use VL3xN or BORGR, it is not.
Can anybody help me here?
Thx & regards,
Bobby

Padmasri,
the x in VL3xN stands for 1 or 2, i.e. either create or change.
BORGR is the transaction code for goods receipt in the automotive business.
B.

Error in generating reference number of process

Hi All Masters,
I'm new in HCM P&F.
Currently I have a problem. I was running a sample process or copied process from the sample. Clicking 'check and send'. Still OK.
But when I clicked 'Send' button, I got an error message displayed 'Error in generating reference number of process'
Would you please help me what's wrong with that? FYI, I've tried to activate Case Management, but maybe, there is still any loss in that area?
Thank you for your help
Regards,
Pradita Herdiansyah

Hi Otto,
Neither did I. I don't have any complete resources. Maybe actually there are exists somewhere, but just I don't find it yet.
I try to learn and doing that by watching this forum and sap help/doc, just maybe there are other people who have same obstacles with me in developing this and then I will get solutions for it.
Have a nice day...
Regards,
Pradita Herdiansyah

" VL 476: Item 'Official Doc. Number' is not copied from the reference doc"

Hi Guys,
When I am doing the Accrual Reversal in F.81 I am getting the following error
" VL 476: Item 'Official Doc. Number' is not copied from the reference document ".
I have maintained the number ranges also. I am not able to understand why the system is issuing this error.
Pls suggest.
Thanks
Srikanth

Hi Guys,
Can anyone please help on this error.
Thanks
Srikanth

Error loading XML Document from /analytics/saw.dll/common/privileges.xml

I tested my procedure for upgrading from OBI 11.1.1.5 to 11.1.1.6 which was successful. I had to rollback to OBI 11.1.1.5 using my database backup and VM snapshot due to project requirements.
The OBI application successfully comes up but users who login just get "Error loading XML Document from /analytics/saw.dll/common/privileges.xml?fmapID=KqIJCw. The response given was: ". They can't close this message box so are unable to do anything.
How can I fix this?

Hi All,
You can face this issue with other versions of OBIEE 11.*
Problem cab be solved as follows:
Go to http://localhost:7001/em > coreapplication > Capacity Management > Scalibility >
1. Lock and edit
2 .increase number of presentation services to 2
3. restart opmn component.
Go to coreapplication > Availibility > processes
1 .please note that in deployment > catalog > change path of catalog field from $coreapplication to path where your catalog resides.
2. Take down your primary instance.
3. As your secondary is up, it will grant you to browse you through catalog and dashboards.
If you want to run primary instance of presentation services
Go to path \Middleware\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips2
except catalog and catalog manager > Copy all other files to coreapplication_obips1
restart opmn component > problem solved.!!!
Regards,
Akshay S.
please like if you find it helpful

IO 229 - Batch for serial number 1234 (BBB) differs from document batch AAA

Hello All,
We use batch management for serialized materials only at our central plant. For all other plants, there is no batch control. Sometimes we need to return materials back to the central plant but with a different batch number.
When we do two step stock transfer 303 / 305, we receive the following error message if we don't use the original batch number.
"IO 229 - Batch for serial number 1234 (BBB) differs from document batch AAA".
However, when we use one step plant to plant stock transfer 301, there is no error message. The batch number is also updated correctly in IQ02.
I wonder if there is any configuration to use 303 / 305 with different batch numbers.
Thanks,
Hakan

Thanks Arminda.
64044 recommends to use 309 to change the batch, which works but this is an additional step.
Currently 1 step plant to plant transfer i.e. 301 doesn't require this additional step. It updates the batch information with no problem.
Is there any configuration option to change the behavior of 305, so that we don't have to do an additional movement?

How do I overcome an error message--Reference #97.1f081160.1428370794.d5492aa

I need someone to help me correct this error message. I am using Adobe Reader XI and am trying to convert a PDF file to a Word document. When I do I receive error message--Reference #97.1f081160.1428370794.d5492aa. Please help me!

Hi Sarabjit:
I finally was able to reach someone at Adobe and they told me that I needed to purchase additional software in order to convert PDF files to Word documents!
Thank you for your interest in my problem with the thought in mind that you might be able to help! I appreciate it!
Karen
[private information removed by moderator]
How do I overcome an error message--Reference #97.1f081160.1428370794.d5492aa
created by Sarabjit Singh in Document Cloud PDF services - View the full discussionHi Karen Can you please try again? It would help if you can paste the link here. thanks-sarabjit If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7413197#7413197 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7413197#7413197 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Document Cloud PDF services by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Error creating document from using list using Document Template

Hi All,
I am trying to create a document from sharepoint list and upload it to a document library using item added and item updated event receiver methods. I can create metadata from list update in document library but unable to open the document. The error message
I get is "we're sorry. we can't open "Filename" because we found a problem with its contents. no error detail available". Please see the below code.
SPSecurity.RunWithElevatedPrivileges(delegate()
try
string TemplateUrl = string.Empty;
SPWeb web = properties.OpenWeb();
web.AllowUnsafeUpdates = true;
SPDocumentLibrary olist = web.Lists["NewLibList"] as SPDocumentLibrary;
String url = olist.RootFolder.ServerRelativeUrl.ToString();
SPFile file = null;
file = web.GetFile(olist.DocumentTemplateUrl);
if (file != null)
SPListItem oItems = properties.ListItem;
web.AllowUnsafeUpdates = true;
byte[] readStream = file.OpenBinary();
SPFile uploadedFile = olist.RootFolder.Files.Add("http://site/subsite/Libraryname/" + properties.ListItemId.ToString() + ".docx", readStream,
true);
SPListItem listitem = uploadedFile.Item;
listitem["Firstname"] = oItems["Firstname"];
listitem["Lastname"] = oItems["Lastname"];
if (uploadedFile.CheckOutType != SPFile.SPCheckOutType.None)
uploadedFile.CheckIn(string.Empty);
listitem.Update();
uploadedFile.Update();
web.AllowUnsafeUpdates = false;
catch (Exception ex)
EventLog.WriteEntry(EventLogName, ex.Message, EventLogEntryType.Error);

Hi,
Please try to use the code below:
SPSecurity.RunWithElevatedPrivileges(delegate()
try
string TemplateUrl = string.Empty;
SPWeb web = properties.OpenWeb();
web.AllowUnsafeUpdates = true;
SPDocumentLibrary olist = web.Lists["NewLibList"] as SPDocumentLibrary;
String url = olist.RootFolder.ServerRelativeUrl.ToString();
SPFile file = null;
file = web.GetFile(olist.DocumentTemplateUrl);
if (file != null)
SPListItem oItems = properties.ListItem;
web.AllowUnsafeUpdates = true;
Stream readStream = file.OpenBinaryStream(); //file is SPFile type
SPFile uploadedFile = olist.RootFolder.Files.Add("http://site/subsite/Libraryname/" + properties.ListItemId.ToString() + ".docx", readStream, true);
uploadedFile.CheckOut();
SPListItem listitem = uploadedFile.Item;
listitem["Firstname"] = oItems["Firstname"];
listitem["Lastname"] = oItems["Lastname"];
listitem.Update();
uploadedFile.Update();
uploadedFile.CheckIn(string.Empty);
web.AllowUnsafeUpdates = false;
catch (Exception ex)
EventLog.WriteEntry(EventLogName, ex.Message, EventLogEntryType.Error);
If the issue still exists, I suggest you dubug your code and check whether line of code error.
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

"An error occurred sending the command to the application" When trying to open excel document from outlook 2007

Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
OS: Windows Server 2008 R2
If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can Create a trusted location follow these steps
Click the Microsoft Office Button , and then click Excel Options.
Click Trust Center, click Trust Center Settings, and then click
Trusted Locations.
If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
box.
Click Add new location.
IMPORTANT We recommended that you don't make your entire
Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
locate the folder.
If you want to include subfolders as trusted locations, select the
Subfolders of this location are also trusted check box.
In the Description box, type what you want to describe the purpose of the trusted location.
Click OK.
More detailed information you can refer to this link:
http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Error Message - Reference number of a document from Back Error

Similar Messages

Maybe you are looking for