Error Message reinstalling oracle express

Hello,
I am new to oracle. I recently reinstalled oracle express and when I clicked "Getting Started with Oracle 11 GExpress " I got the following error message.
[Windows cannot find 'http://127.0.0.1:%HTTPPORT%/apex/f?p=4950'. Make sure you typed the name correctly, and then try again.]
I have uninstalled and reinstalled it several times. Can some please help me, I am new to oracle.
STJ

Make sure you started the oracle services and its listener in your services and try this
http://127.0.0.1:8080/apex/f?p=4550
OR
http://localhost:8080/apex/

Similar Messages

The exception error message was: oracle.jbo.NoDefException: JBO-25002: Defi

Hi,
I added a DFF through create item "flex" in iRecruitment (View applicants page).I am getting the following message:
"The flexfield listener failed while getting the value for segment Job Title from column ASS_ATTRIBUTE1 of the descriptive flexfield with application short name PER and name PER_ASSIGNMENTS. Please contact your system administrator. The exception error message was: oracle.jbo.NoDefException: JBO-25002: Definition AssAttribute1 of type Attribute not found".
Regards
Radhika

Check the DFF you have added according to the error message to confirm that it is setup properly and compiled.
--Shiv

Installation error message for Oracle Database software for version 10g

Would someone be able to advise why I keep getting the following error message whilst installing Oracle trial Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition? Link listed below : -
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Error message "Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp"
Below is the 12 steps that I go through, please advise what I'm doing wrong : -
1. (Operations) default is Create a database
2. (Database templetes) default is general purpose
3. (Database Identification) projemp.local for Global database name & projemp for SID
4. (Management options) default is "Configure the database with Enterprise manager, also the options button has been clicked for "Use database control for database management"
5. (Database Credentials) the options button has been clicked for "Use the same password for all accounts" so I've set up a new password, was that correct?
6. (Storage options) the options button is clicked for "File System - use the file system for database storage.
7. (Database file locations) the options button is clicked for "Use database file locations for template" Is this option correct? Other options are Use common location for all database files or use Oracle-managed files?
8. (Recovery configuration) the options button is clicked for "Specify flash recovery area
9. (Database content) nothing has been selected, the only option is "Sample schemas" should that be clicked?
10. (Initialization parameters) the options button is clicked for "Typical- allocate memory as a % of the total physical memory
11. (Database storage) no options available
12. (Creation options) the options button has been selected for "Create Database"
Click finish
I then get a screen stating General purpose, click OK then I get the following error message as stated at the start of this e-mail ""Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".
Regards
Phil

855880 wrote:
I have been trying to install the "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition" about six times with no success.Do you realize you just mentioned 3 different and distinct products? So which one are you installing?
>
I've gone through my courses instructions as listed above (1-12) and end up with the following error message"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".What course?
>
I've removed the software from my computer using control panel, programs & features then uninstall once but the other five times the software hasn't been listed. Whilst the Oracle was on my task bar I was able to install using Start > Programs > Oracle - HOME-NAME > Database Administration > Database Configuration Assistant.No you didn't. Database Configuration Assistant does not remove software. It can remove a database. As I mentioned before, there is a difference between the software and the objects that software manages. Deleting an Excel spreadsheet is not the same as deleting Microsoft Office. Deleting an Oracle database with Database configuration assistant is not the same as removing the Oracle software.
>
Now that oracle is not on my task bar I've unzipped the link below, clicked on db, Disk1, setup, changed the Database password (is that correct?) install and I get the following error message "Check complete. The overall result of this check is: Failed<<<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses;
However, before you can do this, you must configure the Microsoft LoopBack Adaptor to be the primary network adapter on the system. See the installation Guide for more details on installing the software on systems configured with DHCP."
So what did you do with the above error message? Did you follow up on what it said? Did you read the very fine Installation Guide that comes with the software? Did you read the section on networking considerations where it discussed DHCP assigned addresses and installing the loopback adapter?
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Ok, that link takes us to the download page, which does not shed any light at all on your problems
I'm using Windows Vista Home Premium, 32 bit operating system, and my computer is saying I have 142 GB free space.
If you read the installation manual that came with the downloaded software, you'd have seen in the prerequisites that Home editions of Windows are NOT listed as supported platforms, whereas Business, Enterprise, and Ultimate editions specifically ARE listed as supportd.
Hope this is some help.And
I'm not to clever on computers so would you be able to advise how I get to the command window to issue the SET command please?
Also I've no idea what OS user I am, I'm taking an on-line Oracle course and been advised to install "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition"
How do I find out if I'm part of an Administrator, ORA_DBA group ?
Can you walk me through how to create the directory from command line please?Ok, given the above statements from you, I'm not even sure where to begin. I don't want to be cruel, but this self-admitted lack of even the most rudimentary knowledge by someone attempting to learn about Oracle is truly astounding. What course are you taking? Why are you taking this course?

To Report Error message in oracle website search option

I have encountered an error message in oracle website search option. There was some compilation error in their JSP pages I did not know how to inform the Otn team. Can any one please guide me.
regards,
sagar

You can use the below information for raising an Alert for adapters.
Specific Error Information from the Adapter Engine:
Container Element
ABAP Dictionary Data Type
Meaning
SXMS_TO_ADAPTER_TYPE
CHAR70
Adapter type
SXMS_TO_ADAPTER_ERRTXT
CHAR70
Error text from the Adapter Engine
Refer the below link:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

ORA- Error messages in Oracle Alert File

Hello Gurus,
In a SAP - BW system installed on Oracle 8.1.7.4, there were some oracle errors entries as follows;
Fri Nov 3 02:13:32 2006
Errors in file /oracle/<SID>/saptrace/background/p001_14866_<sid>.trc:
ORA-00603: ORACLE server session terminated by fatal error
ORA-00052: maximum number of enqueue resources (8000) exceeded
ORA-00052: maximum number of enqueue resources (8000) exceeded
How fatal is this error? how to make sure this doesnt happen again and anyone can share the SQL command to see how many ENQUEUE_RESOURCES are being used?
If i have to increase the enqueue, where and how to do it?
Thanks in advance for your help.

Hi "Basis Learner",
1. Oracle 8.1.7 is out of date! It's not maintained anymore.
2. You don't need SQL to tell how many enqueue resources have been used here. The message is clear: 8000. The current maximum. Not a single one more and no less.
3. Well how many more you'll need is hard to tell. But oviously more. Try with plus 50% -> 12000.
Since the process that died here had been a paralle query server process, it may also be the case, that you've configured too many parallel servers. As they run at the same time (parallel) they'll make use of enqueues at the very same time...
4. Of course there are notes:
398927 - ORA error as the dimensions of the parameters are too small
745639 - FAQ: Oracle enqueues
632427 - Oracle 8.1.7* database parameterization for BW
Hope that helps.
KR Lars

Error message reinstall itunes

upgraded to 7.02
error message on launch
conflict blah blah
with cd burner blah blah
re install itunes
what is the best way to reinstall without losing config
i have 3 devices 8000 songs and vids
dont want to reset by error

"blah blah" isn't tremendously helpful, rabid. what's the precise text of your error message? (there's a few different ones i can think of that might fit your description.)
if you find it easier, perhaps send us an a screenshot of your error message box. there's instructions on how toin the following user tip:
hudgie: Taking screenshots to help with problems

Where is SQL*Loader error message in oracle 8i documentation?

I have error message which is SQL*Loader-522: lfiopn failed for
file (D:\xiaw\Badfiles\faculty_info.BAD). I can't find the
solution from oracle 8i documentation. Can someboday help me?
Thanks
wei

Wei:
They're in Chapter 24 of the Error Messages manual:
SQL*Loader-00522 lfiopn failed for file (string)
Cause: LFI failed to open the file.
Action: Check for any possible operating system errors and/or
potential memory problems.
Hope this helps.
Peter

Ora-01097 error message in oracle 10g as

Hi,
This is the error message(below) that i am getting while restarting http server after modification.
Thanks in advance.
An error was encountered trying to retrieve configuration data.
Failed to initialize configuration management user session.. An error occurred when attempting to connect to the Database. Resolution: Make sure that the database and listener are up. If the database is up, make sure that the OracleAS Repository API files ias.properties and iasschema.xml are correctly configured. If necessary, use the EM Console to reconfigure the host, user name and password associated with the database Base Exception: java.sql.SQLException ORA-01017: invalid username/password; logon denied . ORA-01017: invalid username/password; logon denied

Can you give bit more details? Is this HTTP Server (assuming you are talking about Oracle HTTP Server - OHS) part of Oracle Application Server or Oracle Database? What version? How are you starting it (what command)? What modifications did you make?
Thanks
Shail

Error message installing Oracle client on Windows 95 PC...

I am trying to install the Oracle client onto a Windows 95 PC from the original CD. When the CD is placed into the drive it autoruns and brings up the menu. When I choose install I recieve the following error message and installation does not continue. The message states...
The Java RunTime Environment was not found at ../stage/Components/oracle.swd.jre/1.1.7.24/1/DataFiles/Expanded/jre\win32\bin\jrew.exe. Hence, the Oracle Universal Installer cannot be run. Please visit http://www.javasoft.com and install JRE version 1.1.7 or higher and try again.
...I have gone to JavaSoft's web site, downloaded and installed JRE 1.3.1 or whatever is out there as of today. Even after I have done this and rebooted I still recieve same error. Any ideas would be very helpfull since I am all out of them. Tahnnk you.

You need more space for example 256MB RAM or higher.

How to store BDC error messages into oracle database table?

Hello Experts,
I have a peculier requirement wherein I need to store the error messages occured while executing the transaction using BDC (Call Transaction Method) in an Oracle Database table format. Is that possible, if yes, how?
Thanks in advance.

Hi,
Structure of BDCMSGCOLL.
TCODE -> BDC Transaction code
DYNAME -> Batch input module name
DYNUMB -> Batch input screen number
MSGTYP ->Batch input message type
MSGSPRA -> Language ID of a message
MSGID -> Batch input message ID
MSGNR -> Batch input message number
MSGV1 -> Variable part of a message
MSGV2 -> Variable part of a message
MSGV3 -> Variable part of a message
MSGV4 -> Variable part of a message
FLDNAME -> Field name
Ex :
DATA : BDCMSGCOLL TYPE TABLE OF BDCMSGCOLL WITH HEADER LINE,
BDCDATA TYPE TABLE OF BDCDATA WITH HEADER LINE.
CALL TRANSACTION 'MM01' USING BDCDATA MODE N UPDATE S MESSAGES INTO BDCMSGCOLL.
IF SY-SUBRC 0.
PERFORM ERR.
CLEAR I_MSG.
REFRESH I_MSG.
ENDIF.
*& Form ERR
text
--> p1 text
<-- p2 text
form ERR .
DATA V_MSG(255) TYPE C.
READ TABLE I_MSG WITH KEY MSGTYP = 'E'.
IF SY-SUBRC = 0.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = I_MSG-MSGID
LANG = 'E'
NO = I_MSG-MSGNR
V1 = I_MSG-MSGV1
V2 = I_MSG-MSGV2
V3 = I_MSG-MSGV3
V4 = I_MSG-MSGV4
IMPORTING
MSG = V_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE V_MSG. " Error Message Displayed Here.
CLEAR V_MSG.
ENDIF.
endform. " ERR
hope this will help you.
Reward if found helpfull,
Cheers,
Chaitanya.

Interesting Error message using ORACLE and java

Hi Everyone.
i'm using Java beans, JSP, Oracle db.
I'm using classes that work on other projects.
has anyone seen this error before ?
Error Message: Fail to convert to internal representation
Stack Trace: java.sql.SQLException: Fail to convert to internal representation
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:273)
     at oracle.jdbc.driver.OracleStatement.getLongValue(OracleStatement.java:3194)
     at oracle.jdbc.driver.OracleStatement.getIntValue(OracleStatement.java:3141)
     at oracle.jdbc.driver.OracleResultSetImpl.getInt(OracleResultSetImpl.java:329)
     at oracle.jdbc.driver.OracleResultSet.getInt(OracleResultSet.java:1420)
     at weblogic.jdbcbase.pool.ResultSet.getInt(ResultSet.java:290)
     at justice_center.database.JuvenileNetworkBean2.getVecLogIn(JuvenileNetworkBean2.java:273)
     at jsp_servlet._justice_center._juvenile._juv_login._jspService(_juv_login.java:110)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:106)
     at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:907)
     at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:851)
     at weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:252)
     at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:364)
     at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:252)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)
what do you think error is when you look at this trace?
stephen

woops never mind
this s[6] = Integer.toString(rs.getInt("fieldname"));
should have been this
this s[6] = rs.getString("fieldname");
stephen

Customizing Oracle Database Error Message Using Oracle JVM

Avi (that everybody on this forum knows) has just written the following article:
http://www.oracle.com/technology/tech/java/jsp/parameterized_custom_messages.html
Check it out, Kuassi

I got blank space when try to access Oracle Database Error Messages 11g release 2 pdf version. Not sure if it is because of my browser or not. I'm using firefox 6.0.2 in Slackware 13 64 linux.I do not see any PDF link for "Oracle Database 11gR2 Error Messages" Guide, only the HTML version is available.
Error Messages
http://www.oracle.com/pls/db112/to_toc?pathname=server.112/e17766/toc.htm
11gR2 Docs
http://www.oracle.com/pls/db112/homepage

How to change error messages in Oracle Portal 3.0.9.8

I have errors such as "No row returned" and etc.
How can I change this error messages.
Urgent
HELP

about report:
select field1,field2,...,fieldn
from table
where table.date_insert<sysdate
union
select null field1, null field2, ...,null fieldn
from dual
order by field1...
about other err:
solve this problem by writing portlet manually

Is there a way to override the format-mask error message? (oracle forms 6i)

It seem that if data is enter in a field and doesnt follow the format mask schema. it populates it's default error message.
was wondering if i can over ride that. and custimize my own error message/validation.

Hi PandaOracle
what i do recommand is creating a table called e.g handel_errors having
Serial PK
Error_id
Error_textThen using a code in On-error Trigger & On-message trigger to select from table so any error no can be stored and selected from the db this is the most formal practice i used to use in any application.
Example
DECLARE
alert_message VARCHAR2(200);
BEGIN
BEGIN
    SELECT Error_text
      INTO alert_message
      FROM handel_errors
     WHERE msg_code = message_code;
EXCEPTION
    WHEN No_Data_Found THEN
      alert_message:=message_type||'-'|| To_Char(message_code) || ': ' || message_text;
END;
MESSAGE (alert_message); -- Or any alert as previously mentioned
MESSAGE (alert_message);
END; Hope this helps,
Regards,
Amatu Allah

Customize Error Message Page - Oracle Portal

Hi,
Please how i can customize Error Message Page ? or just the page not found ?
tks
carlo

This is documented in the Portal admin guides.
Make a copy of the standard error page (in the navigator) then change the portal configuration (in builder) and tell it to use your own page.

Error Message reinstalling oracle express

Similar Messages

Maybe you are looking for