Error Message : Reload Software 513

I know various people are going to direct me to previous threads and topics about this, but i can assure you that ive checked and scoured the internet to no avail.
To cut a long story short, I plugged my Curve into the computer, it asked me for a device password, i didnt know what it was, i tried various things, and due to my stupidty i entered the wrong password 10 times and didnt take none of the warnings seriously. My phone then wiped itself and left me wit the message Reload Software 513
After searching for a solution for this, i didn't really have much luck. Mainly because the desktop manager i was using (v4.7) was different to the one other people had used and even different to the one a KPB was showing me on the solution centre bit.
I got off the phone to an 02 helpline who then tried to instruct me the same way this website had tried too. They think the problem is because i do not have the latest Desktop Manager V5 or something.
If anyone can talk me through what to do, or has any help, it would be greatly greatly appreciated
Solved!
Go to Solution.

No, sorry, I don't know why I assumed you had an 8320 Curve.
I have edited my post above to the 8900 link and software.
Forget about the 8320... my mistake (though it would not have loaded to your 8900, so no worries there).
Download the OS. Find the downloaded *.exe file and double click on it to install it to you PC.
Follow the directions in the link... step by step.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Error message - Reload Software: 552

How do I fix the Curve 8900 with the following error message:
Reload Software: 552
My phone is stuck with this message every time it is on. It does not go anywhere, not even the home page, just a white background screen and this little message in the middle. I have to take off the battery to make it go away.
Please advise. Thanks !!

Error 552:
http://www.blackberry.com/btsc/KB18751
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Reload Software 513

I've only had my blackberry curve 8900 for about 2 months, twice it has asked me to enter my password as usual but instead of them appearing as stars when i'm typing them it comes out in letters then whe i press enter is says.. type blackberry to continue even after following those instructions it wipes off everything.. this has happened twice and it's so inconvenient as most of you would know... but yesterday it did the same thing but the screen went white and the message 'Reload software 513' appeared with a line going across a circle with a box inside..... is this a fault or something that can be repaired easily????

Hi and Welcome to the Forums!
It sounds as if you are mis-typing your password -- and after the maximum number of allowed attempts, it automatically wipes the device clean (as a security precaution, on the assumption that you are not the "owner" of the device). What it also does, during the password retries, is to show you the password in clear text after some number of failed attempts.
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB00588&slic...
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB10385&slic...
As for the 513 error, here's a KB about that:
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB13003&slic...
Hope something there helps!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Curve 8900 - 'Reload Software 513'

My Son was given a Curve 8900 and has used it for months without any problems. Yesterday some of his friends messing about tried to access his phone and put in wrong pin number several times.
His phone is now showing a message 'Reload Software 513'
We have never syncrinised this phone with the internet, so not sure how we go about sorting out this problem, so any advise would be appreciated.
Thank you.

Hello JaxT,
Perform a hard reset by removing the battery from the BlackBerry smartphone and reinserting it. For more information on this procedure, see KB02141.
If the error message persists, perform a reload or upgrade the BlackBerry Device Software. For more information on this procedure, see KB10144.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Reload softwares 513, help!

Hi, After 3x wrong password, device wipped and error on screen reload softwares 513 I have been searching an trying for hours now and all the steps described don't work - - installed version software and device - BUT no option available to update software in manager - when trying to connect to device, get always error message that software cannot communicate with BB can you please help! Thanks, Bram

Hi
You don't mention what version of the OS or DTM you are dealing with. We can deal with that after finding a solution to the new issue of the PC not recognising the BB.
Make sure that you are using a proper data cable, preferably the BB one which came with the device. Many cables - which look the same as a data cable - permit charging only.
Next, after confirming that the cable is satisfactory, ensure that you are using a known good USB port on the PC. Not all ports are connected to the board inside the computer.
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

Error 205 Reload Software

Hi everyone, I have a Blackberry Curve 9360 phone. It fell from my hand 2 days ago, it restarted immediately but after booting showed a white screen "Error 205 Reload Software". Since then I have tried everything but its still not working. I have used the 'AppLoader', but it freezes at some point. Its not even connecting to the desktop device software. I have never backed up my data and I don't want to lose any file . Pls, i need your help urgently. Thanks

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB17024"Application Error 205" appears on the BlackBerry smartphone
While it is for a prior model BB, hopefully it still contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
beccaodil wrote:
I have never backed up my data and I don't want to lose any file .
You took a big risk there...backups are, as with all computing devices, not a reactive nor an optional activity. With this error, it is highly likely that the data on your BB is already gone. If the above KB does not provide you with a recovery, then you may want to try these also:
KB27956 How to recover a BlackBerry smartphone from any state
Of course, if the problem is hardware, then there is nothing to be done here...
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error 507 reload software

Hola,
Puede alguien ayudarme, tengo un smartphone Blackberry Torch 9800, la pantalla se quedo en blanco con un mensaje que dice Error 507 reload software - for further information, please visit :
www.blackberry.com/507
Intenté cargarle nuevamente el device sofware, sin exito hasta el momento, comienza a descargarlo y son 430 modulos, cuando llega al 190, se para y me dice, pronblemas de conexión, intente más tarde, pero ya hace tres días que lo intento y son exito alguno.
No sé que más hacer..
Could somebody help me please, I have and smartphone Blackberry Torch 9800, the screen is frozen with a message
Error 507 reload software - for further information, please visit :
www.blackberry.com/507
I tryed to download the device software since three days ago unsuccesfully, it start download ( it says 430 modules to download ), but when it gets up to 190 modules it stop and I got a message, internet conexion problems try later ).
I don't know what else to do.
Gracias y saludos.
Daniel

See the link below, for the download and simple installation instructions.
First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

"Error 102 - Reload Software"

The words entered into the subject line above "Error 102 - Reload Software" pops up before my device can finish rebooting all of a sudden. A battery pull did not fix this issue, neither did plugging in the phone and running the desktop software to try and reload the software. It won't let me reload the software, and I am at a loss of what to do to get my phone working again. This is becoming extremely frustrating on my part and any advice on what to do in this situation would be much appreciated. I have tried updating or finding software updates, when I tried to reload with the newer version I was provided with another "error" message with relation to its ability to load on the device. Can anybody tell me what to do? It was working perfectly fine, and all of a sudden, this happens.

Hey marysumann,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
To resolve this issue you will need to use the force detection method to reload the software. Follow the steps in this KB article: www.blackberry.com/btsc/KB10144
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Reload Softwares 513

Hi my name is Jojo. I did something stupid today. I locked my keyboard on my phone and I used up all my attempts to open it and now it said to "Reload softwares 513".   What do I do now or How do I do it? It is a Blackberry Curve 8330 Smartphone....Please help me...
Solved!
Go to Solution.

Hi and Welcome to the Forums!
Here is a KB that discusses that error:
KB13003 "JVM 513" error appears on the BlackBerry smartphone
Hopefully it contains something useful!
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

How reload software 513

it asked me for my password and typed it in and it said in vaild password then type black berry it did that for 5 times then it said wipe memory then now it says reload software 513

Hi and Welcome to the Forums!
See this KB (along with the links within it):
KB13003 "JVM 513" error is displayed on the BlackBerry smartphone
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1. Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.

I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Error message hkey_local_machine\software\classes\itunes.aifc keeps appearing when updating.

Error message hkey_local_machine\software\classes\itunes.aifc keeps appearing when updating. Then update uninstalls. I was trying to fix a missing driver error.

Press WinLogoKey+R to open the Run... dialog box
Type in Regedit and press enter/return
Tap the plus symbol next to HKEY_LOCAL_MACHINE
Tap the plus symbol next to SOFTWARE
Press C on the keyboard, then again or scroll down until Classes is selected
Tap the plus symbol or use the right-arrow key to open the branch
Press i on the keyboard, then use the Page Down key, scroll bar or arrow keys to locate iTunes.aifc
The registry editor should now look something like this: (Click to enlarge)
Right-click on the iTunes.aifc key and click Permissions... to see what is going on. My current permissions for the iTunes.aifc key are shown below: Giving Administrators and/or yourself Full Control should be enough to let the installer make changes. Alternatively you could delete the key and let the iTunes installer recreate it.
tt2

Error message during software updates

I am constantly receiveing the following error message during software updates. This time it happened with an HP printer update, but it has happened with iTunes and Safari as well. Does anyone know what I need to do?
The system extension “/System/Library/Extensions/GeneIOUSBCFSubclass.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update
Thanks!

Try using Help > Updates from one of your CS6 applications.
When you return home, you might try uninstalling CS6 and reinstalling it again. It sounds like some stuff may have become corrupted.

Was able to download and install Premier but can't install Photoshop Elements - getting multiple error messages (pirated software, etc). Any ideas?

Was able to download and install Premier but can't install Photoshop Elements - getting multiple error messages (pirated software, etc). Any ideas?

download from adobe.com or prodesigntools.com.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Error Message : Reload Software 513

Similar Messages

Maybe you are looking for