Error message: "Remove USB Device from printer."

I have an HP Photosmart 309 a All-In-One. It is attached to my desktop computer, which utilizes the Windows XP system. I've owned the All-In-One for about three years. I do not use the All-In-One -- or this computer -- very much. (I mostly use my laptop.)
I have not made any changes to this computer and/or All-In-One in quite some time. This error message is new. I do not have a USB device attached to the printer. Even with the error message displayed, the All-In-One allows me to print, but it will not allow me to make a copy or scan. How do I make this error message go away? What's wrong with my All-In-One? Thank you for your help!

Hi DuckLakeSue,
I understand that you are getting an error message to 'Remove USB Device from printer'. Follow the steps provided in this link by the PrintDoc to determine if your wireless radio has failed.
I hope this helped, let me know.
Thank you,
I worked on behalf of HP.

Similar Messages

TS1369 Hello! I have an Ipod Shuffle 2nd Generation and it is not recognized by my Windows 8 based laptop. An error message of 'USB device not recognized' is shown. I have the latest ITunes version installed, and tested the dock in other pc's.

Hello!
I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
I could really use some help solving this.
I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
Help a brother out, will you???

Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
It was for an IPOD so you can see those details in the link.
Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
- Turn off computer.
- Plug Shuffle into usb.
- Then you must reset your shuffle
To reset iPod shuffle:
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
- Start computer and it should install the usb driver for the ipod automatically.
- Your i pod will say do not unplug so don't. then open itunes and it will be there.
I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
Just remember to not only eject ipod from itunes but stop usb.
Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
Stop it and select "apple ipod".

When i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?

when i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?i tried using on a different pc.but still get the same result..

First thing i would try is to use another cable if available.

Toshiba PX1267E-1G32 Ext HD Error Message says USB device has malfunctioned

Hi
I have Windows XP and have been using my Toshiba External HD for a few years.
I am a novice.
Suddenly yesterday the below message appeared and I cannot get any computer to recognise the device.
"+USB Device Not Recognized+
+One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it. For assisstance in solving this problem click this message+."
I've tried to reinstall the drivers from the internet & the HDD CD but the same message occurs.
I've installed it onto another computer and the same error message.
The device still makes a noise and the blue light is on but no other action.
Is there anything I can easily do?
Many thanks in anticipation
naveedsyed

> I thought that sort of stuff wasn't meant to happen to external drives....
Why not? The external HDD is the same like an internal notebook HDD which dies as well
> Any other suggestions welcome
I assume this is a 3.5 HDD
You could remove this HDD from the HDD case and could connect this HDD directly to an desktop PC using an IDE or SATA cable (Im not sure if this is an SATA or IDE HDD).
If the BIOS would recognize the HDD then you would have good chances to get access to the data stored on this HDD.
Greets

HT4101 When I connect my camera I get an error message saying USB device uses to much power. What do I do to rectify this

I am unable to download photos from three different cameras, Sony, Samsung and Nikon using the lightning USB camera connector. I get a error message saying the the USB device uses too much power.

You may be able to over-come the problem by using a powered hub.
https://touch.ebay.com/tablet/item?itemId=130511148857&rd=vi

Receiving error message "remove shipping lock from yellow cartridge" Laserjet CP1525n

Purchased replacement yellow cartridge and followed replacement instructions. Now receiving error message that the shipping lock needs removed. It has been removed but printer will not operate and I continue to receive the message.

I would verfiy that all packing material was removed by viewing this link here. After that if you are still getting that error message, I would do a hard rest to the machine. No user settings are lost with a hard reset and it will attempt to clear erroneous error message and restore the printer to a known working condition if possible. To do a hard reset:
1. With the printer plugged directly into a wall outlet, and turned on, unplug the cord from the rear of the printer.
2. Then unplug the cord from the wall socket.
3. Wait at least 30-60 seconds
4. Plug the power cord back into the wall socket first. If the cord has a module in it, make sure that the light on the module is lit up and then plug cord back into the rear of the printer
5. The printer might power back on by itself, but if not use the power button on the machine to turn it back on.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

Error message When Importing device from ZCM

Hi
I create a ZCM importing setting in the AMIE, when I save the configuration setting...it show successfully, but I clieck import button,it show "A default Service Request team must be set in the preferences prior to running an import"....
I do not know how to set default request team,Who could teach me ?
thanks!!
wyldkao

First, create groups for each process. Then go to [Setup] -> Setup -> Privileges -> Requests and select the defined teams (must be above the Proof Options).
Greetings

Error message in Adobe Pdf in printer device panel when trying to create a pdf document. I have CS3

Error message in Adobe Pdf in printer device panel when trying to create a pdf document. I have CS3 Web Premium with Acrobat Professional 8. I use it fine on my old computer with Windows XP. I recently got a new laptop with Windows 7. I installed all my Adobe programs, and I think they are working. When I look at Adobe PDF in the device section of the Control Panel it looks okay. But when I try to print a Word, Photoshop, or HTML page in PDF, nothing happens. I have tried printing both as File>print and using the PDF tab on the top menu bar. I look at the device in the control panel and it has the yellow error warning symbol and suggests trying to troubleshoot. I look at the document list and it says status "error". When I try troubleshooting Windows suggests doing some Home Sharing and also suggests canceling the document I'm trying to print. I tried re-installing just Acrobat 8 from CS3 (and have to use Photoshop CS4 disk for shared documents I guess). I ran into a can't locate adobepdf_dll file, so did a web search on this issue and found a suggestion that I find and use the adobepdf_dll_64 file and may have to (I did have to) remove the "_64" for it to work. I think I successfully reinstalled using that dll file- no errors came up anyway. But still when I try printing/converting a photoshop, webpage, or word document into pdf, the pdf device in control panel still gives the error status on the document and gives the same troubleshooting advice. Help?

I just compared the properties between the two computers. On the old computer it has the port as "My Documents/*.pdf". On my new computer it lists the port as "LPT1". I tried changing the port to "Print as File", but when I try printing a photoshop picture as pdf, I get a "Access Denied". I then tried to create a new port on the device control panel. I tried to create a local port "My Documents/*.pdf" port but was denied. I ten tried to create a new port type and control panel asked for an INF file. I wonder if this is where my problem lies. Thoughts?

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location?

Thanks Shane I followed your instructions and it turned out pretty well. One quick question, Im working with DVD Studio Pro 4, how do i implement a theme into my project? I cant even fin where thay are located. Thanks.

How do I Completely remove a device from 'Text Message Forwarding' on my iPhone?

I want to completely remove a device from 'Text Message Forwarding' on my iPhone... I don't just mean turn it/toggle off.

To delete the book from the library, control click > delete.
You cannot delete purchases from the Cloud, however, you can hide them:
http://support.apple.com/kb/HT4919?viewlocale=en_US&locale=en_US

Error message when trying to view/print Crystal reports in B1

I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:
" Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304' or one of its dependencies. The system cannot find the file specified. ????

Hi
Common issues for this :
1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
Put on the user name and password and click on creating ext tables
Try then running the report .
If not the case ,
make sure you install runtime .
You need :
1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
2.You need to have crystal integration addon (I think service pack is SP1)
3.Make sure you have runtime install
When you are installing ,make sure you restart your PC before you do or remove temporary file s
Hope this solves your issue
Bishal

Unable to download iTunes on my second windows computer (64 bit). I got it fine on my first one. After downloading the program and installing it, I keep getting an error message:Apple Mobile Device Failed to Start. This happens wven when my IPhone 5c is t

I am unable to download iTunes on my second Windows 8 computer (64 bit). I got it fine on my first one and have used it quite a bit. After downloading the program and installing it on the second computer, I keep getting this error message: "Apple Mobile Device Failed to Start." This happens when when my IPhone 5c is connected via Wi-Fi and I have clicked on "Trust This Computer." (I have tried to install several times-- It gets hung up when it reaches"Starting Services.")

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

I purchased a ipod 5 and i need to activate it and i already removed the device from the original owners account and i turned off the ipod and turned it back on but it still asks me to activate it what should i do ?

I purchased a used ipod touch 5 and i cant activate it because i needed to remove the device from the owners account but once i did remove it it kept asking me to activate it what shoukld i do ?????

Just what do you mean by activate? Are you getting an error message?If it is still asking for the previous owner's Apple ID and password the iPod was not removed from the previous owner's account

An error occurred while USB device is connected to your Horizon View 6.1 desktop

Hi,
Recently we upgraded View from 5.3 to 6.1. Currently I use the virtual desktop agent 5.3.3 (VMware-viewagent-x86_64-5.3.3-2299613). USB redirection works fine.
If I update the agent to 6.1 (VMware-viewagent-x86_64-6.1.0-2509441), the USB redirection is no longer working with this error message:
An error occurred while USB device is connected to your Horizon View desktop.
Any suggestions are welcomed.
Thanks.

Error -4 is almost always an indication that the connection between the AirPort Utility application and the AirPort router is is being blocked by....
1) The Windows Firewall
2) Microsoft Security Essentials...if installed on your PC
3) The anti-virus software
4) 1&2, or 2&3, or 1&3, or all of the above
When I used to use a PC, the only way that I could ever get the AirPort setup was to turn off all of the items above, configure the AirPort, then turn everything back on again.
Life would be tons easier if you had an iPhone or iPad to configure the AirPort Extreme, or you could borrow a Mac for a few minutes.

Error message: "Remove USB Device from printer."

Similar Messages

Maybe you are looking for