Error Message: REP-0108

Hi,
I am writing a report in Report 6i, and get a message:
REP-018: 'I:\0\L-ABC.JPG' NOT FOUND'
I click on the 'help', it gave me the info below:
Cause:     Report Builder tried to access the file shown, but could not find it.
Action:     Check that you have specified the correct filename. Specify a directory before the filename, or modify the REPORTS30_PATH environment variable to include the directory where the file is located.
How should I fix this?
Thanks,
Jun

Hi Jun,
1) Is I: mapped drive ? If so ensure that I: drive is mapped properly and you could list the directory and see that L-ABC.JPG file exist.
2) When you call the report, try giving the full physical location of the file like 'I:\0\L-ABC.JPG' (or) in REPORTS60_PATH registry variable add the directory info. where the image file can be found.
Hope this helps.
Thanks,
Vinod

Similar Messages

  • REP-1849    HELP!     Reports 6i runtime error message REP-1849

    Running Reports runtime 6 on Windows 2000 server.
    Printing to either printer from Notebook, prints OK.
    Printing to network HP LaserJet 8150 PL 6, all is OK
    Printing to network HP LaserJet 5Si MX this happens:
    The end of the trace log:
    13:45:11 APP ... ) Group G_1
    13:45:11 APP ... ( Group G_2 Local Break:
    2 Global Break: 2
    13:45:11 APP ... ) Group G_2
    13:45:11 APP .. ) Repeating Frame R_2
    13:45:11 APP . ) Frame M_2_GRPFR
    13:45:11 APP ) Frame
    13:45:13 ERR REP-1849: Failed while printing.
    This error message is not detailed so that the problem can be
    figured out. I assume it is a driver problem....
    Any help Please? Project is stopped dead for this portion...
    Thank you in advance..
    Les Briesemeister

    We have set the DESFORMAT variable to DFLT but we are getting the same error. When we click in Choose Printer in rw60bld we get the error REP-3002 (Error initializing printer. Please make sure a printer is installed) and when we try to run the command: rwrun60 we get the error:REP-0713: Invalid printer name 'fuenla" specified by parameter where fuenla is the name of the printer.
    Thank you very much in advance

  • Error Message: REP-0606

    Hi,
    I got a error message in Report 6i:
    REP-0606: unable to read link file 'I:\0\ABC.JPG'. check link file format.
    How do I check the link file format?
    Thanks.
    Jun

    Hi Jun,
    This error doesn't come for all JPGs.
    You can try the following :
    1) Use an Image Editor/Converter to save the file.
    In this case, use some Image Editor, and SAVE the file AS the same/or different filename. This should mostly resolve your problem.
    2)Load image into OLE item.
    Thanks,
    Vinod

  • Error message: rep-4232, rep-4204 while running report

    hi
    if possible pl. reply me at: [email protected]
    i want to email my report by using report6i. i have given following parameters as per
    oracle note : 106549.1;
    destype: mail
    desformat: pdf
    desname: [email protected]
    i am running this application on window nt .
    in my system i am able to send emails using netscape browser. i am getting rep-4232, rep-4204 while running report when i run my report.
    pl. suggest.
    bye
    navdeep
    null

    i got one reply:
    This bug is fixed in version 6.0.8.12.0
    Please go through this bug document REP-4204 / REP-4232 WHEN EMAIL REPORT TO VALID EMAIL ADDRESS NOT IN ADDRESS BOOK for explanation.
    but problem is that i have 6.0.8.8.3
    how to resolve problem in this version

  • REP-1920 Error Message

    Our project has reports that fail with the following error message:
    REP-1920: Character mode runtime incompatible with
    DESFORMAT of PDF, HTML, HTMLCSS, or RTF.
    It is not always the same reports that receive the above message, it appears to be random in nature. Indeed, the vast majority of time these reports run with no errors at all. All of a sudden, out of the blue, certain reports (no pattern, it could be any of our reports) will fail with the REP-1920 error message.
    To make matters worse, NONE of our reports are in CHARACTER mode. All have an initial value of DEFAULT (i.e. BITMAP). Now we do have one report that generates a CHARACTER report dynamically, by passing a paramter at runtime, but that report (the .rdf) has a DEFAULT mode as well, and is run off of a different report server than all the other reports.
    I have scoured the NET and have not found anything that can tell me why we are receiving these error messages. Anybody?
    Note: We are running Report Server 6i Patch 10 (6.0.8.19.0) on a Windows 2000 box. Dev Tools are Patch 10 as well.
    Thanks
    James Walters

    Hi James,
    We have never heard of this issue before. We can undeerstand the REP error if there is some contradiction in Report request between deformat and the mode. But since you told this happens once in a while, that too randomly, it seems, wrong message is being displayed. I suggest you get in contact with Oracle support on this issue. This need to be looked into.
    Thanks,
    Rohit

  • REP-3000 Error Message

    I have install Web Reports Server 6i on Solaris 2.8 x_86 platform and i hav configure its above documentation. I can start it under OAS 4.0.7 web listener. Then, if i want to create the test report on the web, i receive an error message:
    REP-3000: Internal error starting Oracle Toolkit.
    Tell me please, what can i do.

    You may be right. But in this case i don't know another plase, there nls-support (*.nlb) files are may be installd. In my $ORACLE_HOME there are no directory, naming like datad2k. I think, that Developer 2k use nls-support files from base nls directory, because i install if after RDBMS, but after installation of Developer 2k in the list of installed products i so, that it content the 8.0.6 NLS-Support Files and Libraris. I in the firm belief that it is not RDBMS files, becouse the version of RDBMS is 8.0.5.
    It meens, that the cause of REP-3000 error is other. If you know some more about it, tell me please.
    null

  • Oracle 6i error message

    Can I suppress the window error message " REP-1825 - ... " when the BEFOREREPORT trigger return FALSE ???
    Or can I re-write the text of this message ??????

    Hi,
    You can not suppress the window error messages. If you use batch=yes option in command line, It will suppress window error message boxes when you are running with Report runtime.
    Thanks,
    Puvan.

  • Error Message-version 6

    When I attempt to print oracle report via version 6 form, I receive following error message 'REP-4004: Error occirred while restoring OLE object'. Does anyone have any idea as to what is causing this error message?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

  • Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

    Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

    What may have happened is an error and a kernel panic, filling up the logfiles.
    What I recommend is first to find a way to backup your data without booting the hard drive directly if it isn't already backed up, and then get Alsoft Disk Warrior to repair the hard drive.    You'll probably want an external drive from http://www.macsales.com/
    And you'll want to go into Hard drive -> Library -> Logs, System -> Library -> Logs, and Users -> yourname -> Library -> Logs to remove whatever you find there.   
    If after booting it fills up again, start by removing all startup items in your System Preferences for your user, and rebooting in safe mode with the shift key held down. If the hard drive is over 85% full after removing the logfiles, you may want to look at what were the last applications you installed.
    Peer2peer software if installed can be as bad as a virus, because it enables others to access your computer. Insecure wireless networks are just as bad, if they are WEP or no encryption and someone is within 1500 feet of your computer.
    If no such software is installed, your RAM probably has failed.    Run the hardware test that came with your computer, by booting with the 'D' key.
    If nothing shows up there, it can still be the RAM.   Especially if you've seen any 4 language screens telling you to restart.
    Here's more on kernel panics:
    http://www.macmaps.com/kernelpanic.html*

  • REP-56071: Security check failed with error message: Error code30009 - Gene

    REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
    Hello,
    I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
    one more thing...
    We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
    Tx,
    Diego.

    I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
    The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
    REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
    But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
    Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
    Regards.

  • REP-1814 error message

    Hi,
    Can someone tell me why I am getting this error while runing a report?. the error message is REP-1814: Report cannot be formatted. Object 'vertically' can never fit within 'B_272'.
    I don't have any object called 'Vertically' in my report. B_272 is just a text field.
    Thanks alot
    Kavita.

    never mind, I figured out that the 'print object on' property of the frame above the current frame is causing this error.
    -Kavita.

  • How can I handle REP-0108 error

    I have a column in my database that contains the name of an image file. I created a field on the report for this column, with the 'Read from File' set to Yes and the format set to 'image'. The problem is, that the database contains file names that point to images that have been removed and when I run the report, I get a REP-0108 error which stops the run. Is there a way to handle the 'file missing' error and have the report run to completion?
    I have a column in my database that contains the name of an image file. I created a field on the report for this column, with the 'Read from File' set to Yes and the format set to 'image'. The problem is, that the database contains file names that point to images that have been removed and when I run the report, I get a REP-0108 error which stops the run. Is there a way to handle the 'file missing' error and have the report run to completion?

    Hi,
    This error isn't just caused by a lack of memory, it can also be caused by fragmentation of the shared pool. It quite often shows up in applications where developers don't use bind variables and issue a large number of very similar but distinct queries, especially in long running processes. In this case you can try regularly flushing the shared pool or beating the developers about the head every time you see them not using bind variables.
    Andre

  • REP-0108 Error

    I installed Developer 6.0 form, graph, report runtime on a client
    machine and now I get REP-0108: file 'rwbdexpg' not found errors.
    The help says to make sure the report30 path is correct. Doing
    a find on the machine comes back without finding the file. Why
    would 6.0 look for a 3.0 directory???
    null

    Thank you for the suggestion.
    Found utl_file was able to access files only within the server where it was running(Database server). Our image file was located in a different location.
    Trying other ways, like utl_http to check if the image files exist.

  • REP-56071:Security check failed with error message:No privilege to do oper

    Hi
    I get the following error when I try to see the job status (..../rwservlet/showjobs?)
    REP-56071: Security check failed with error message: No privilege to do the operation
    I also get the following error on running any report on this server:
    REP-110: Unable to open file 'Test.rdf'.
    REP-1070: Error while opening or saving a document.
    REP-0110: Unable to open file 'Test.rdf'.
    Anyone seen the same issue before?

    Fugured it out - had issues with reportserver.conf file.
    _*                                                                                                                                                                                                   

  • REP-56071: Security check failed with error message

    Hi!
    We have an Oracle 9iAS R2 v9.0.2.2 installation on Linux (Red Hat Advanced Server 2.1). We have installed PatchSet 2703110, 2581587 and 2842923.
    Oracle9i Reports version is: 9.0.2.2.0
    iAS and Infrastructure are on separate hosts.
    Trying to run Reports demo test.jsp or test.rdf we get the following message:
    javax.servlet.jsp.JspException: REP-56071: Security check failed with error message: Error code30001 - Cannot access the server:rep_dkipcias
    In package:wwv_rw_usr function:security_check
    Command line is: server=rep_dkipcias report=/repdemo/examples/Tools/test.jsp rundate="29-MAY-03 09:05:01"
    Found on Metalink the following Note: 216847.1
    This recommends to comment out the security and destination tags in ORACLE_MIDDLETIER_HOME/report/conf/<repserver>.conf file
    After commenting them out reports works fine.
    BUT
    at the end of the note there is a note which states that "Commenting out the security tag removes the integration of the reports server and portal."
    We need reports integration with Portal. We need SSO as well.
    Could you give any workaround for this problem?
    PS.: I have red Note:213171.1, Note:216118.1, http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/securing9i.pdf and BUG:2645629
    None of them gave any solution for the problem
    Thanks in advance,
    Andras Weintrauth

    Hi Jeff,
    Q(1): Yes.
    (Report Name and Servers tab)
    Report Server: REP_DKIPCIAS
    Oracle Reports File Name: test.jsp
    Execute: as JSP
    (Other tabs)
    Default values. Unchanged.
    Q(2): (Acces Tab of Report Component)
    Publish to Portal = checked
    Inherit Privileges from Portal DB Provider = checked
    (Acces Tab of Report Server Component)
    Inherit Privileges from Portal DB Provider = checked
    (SSO User)
    The user I try to run the report with has the following group assignments:
    Privilege Group
    PORTAL_ADMINISTRATORS
    PORTAL_DEVELOPERS
    DBA
    PORTLET_PUBLISHERS
    Additional Info:
    To be more specific: The mentioned security check failure exists outside of Portal as well. Eg. when we try to run the default portal test examples (test.jsp, test.rdf) from the iAS home page Demonstartions tab.
    Thank You in advance,
    Andras

Maybe you are looking for