Error message RME (LMS3.2)

For two days I have no syslog alerts anymore (No data is available).
In "You Are Here - Admin Device Mgmt - Device Management  Settings" I get the following
message:
Error in getting instance of TreeGenerator class  com.cisco.nm.rmeng.inventory.dm.ui.DMTreeGenerator
Root Cause:com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : urn  "ogs_server_urn" : Not found !!
Also in "You Are Here - Devices - Device Management -> RME Devices" I  haven't got a tree view anymore, the window is plain white,
but in "You Are Here - Devices - Device Management" LMS shows me the  devices in normal state.
OS: W2k3 SP2
If anyone has got an idea please let me know.
Thanks,
Bastian

Windows Remote Management service was runnning,
stoped and disabled this service and restarted Daemon Manager.
So far everything looks fine again, RME components are running again.
Thanks a lot for your help!
Bastian

Similar Messages

  • Error Message when accessing a device on RME Hardware Summary

    When I go to RME, RME Harware Summary, and try and click on any category I get the following error Message.

    1. Post screenshot of the error on the page.
    2. Go to RME --> Admin --> System Preferences --> Application Log Level Settings --> Application and enable the following debugs:
    Enable debugs for RME Portlets
    RME --> Reports ---> Report Generator --> Duplicate the problem here.
    Get RMEPortlets.log from CSCOpx/log
    Goto CSCOpx/MDC/tomcat/logs and get the logs.
    3. Goto Common Services ---> Device Management ---> Device and Credentials ---> Select one of your device and view identity.
    If it contains a hostname with space or fqdn, just modify it with ip address only and re-run reports. And then test it out again without domain in hostname.  And if the display name has any special characters, please remove it and re-run the reports.
    Is this a new installation? If so, get the install logs from C:\Ciscoworks_install_xxxx.log as well. How long has this been occurring? Does the RME application function correctly at all?
    Don't forget to disable debugs.

  • Error Message in config Archive in RME in LMS 4.2

                      I got the below error message in the config archive in the LMS 4.2.
    CM0056 Config fetch failed for 10.0.0.10  Cause: CM0204 Could not create DeviceContext for 797 Cause: CM0202 Could not access 10.0.0.10 via SNMP. Action: Check the Read Community string Action: Check if required device packages are available. Action: Check if protocol is supported by device and required device package is installed.
    Switch model type is 3560 and 2960
    Please tell me the reason for this issue.

    Are you usig only TFTP option to archive configuration. Try to use the telnet/ssh. TFTP as a protocol set for config archive.
    Check the Credential verificatio job to see if the crendentials are configured correctly.
    -Thanks

  • Error Message in EoL/EoS Report

    currently running LMS 3.2 get the following error message when running the Eol/Eos report: under reason for failure get unable to get data from Cisco.com try again later. using the same login that is used to login to Cisco.com.

    The online version of this report is currently broken.  We have been working to fix it for a while now, but unfortunately, I do not have an ETA.  The workaround is to use the offline report mode, and download the data from http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-rme .

  • Designer 4.1.1 error message ora-01722 at 'open down '

    Message
    ORA-01722: YA
    Message
    RME-02124: Failed to execute SQL statement:
    select obj.id, obj.ivid, obj.name, obj.element_type_name , obj.diagram_type
    from CI_DIAGRAMS obj, ci_folder_members fm, ci_container_elements cel
    where fm.member_object = obj.id and cel.ivid = fm.parent_ivid and cel.id = :containerID and OBJ.DIAGRAM_TYPE in ( 'BPA')
    and OBJ.SUB_DIAGRAM_ID = 1974593597164206331699600463368029410order by 2

    Hi,
    I believe you are on to something.
    The select list for item :P6_DOCUMENT appears when I first bring up the form. When I select my organization and receive the error message, I clicked on the Session in the Developer's bar. The value in item/field :P6_DOCUMENT shows %null%.
    This is the path in which my user would like to accomplish her task:
    1. Select an organization
    2. Display the information for that organization from the AGREEMENTS table
    3. Enter the data for the remaining fields in the AGREEMENTS table
    4. Select the document (:P6_DOCUMENT) from the drop-down.
    5. Click Submit
    6. Update the AGREEMENTS table with data entered in #3.
    7. Insert a record into the AGREEMENTS_DOC table with the selection from #4.
    Somehow I need the :P6_DOCUMENT field not to show the %null% during the SEARCH functionality. I think that is causing the problem.
    How do I fix this?

  • Windows Vista: Ipod Error Message, no longer read by PCs

    Hello,
    I have a 5th generation black ipod video with 30GB of memory.
    The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
    Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
    I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
    What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
    Any advice would be greatly appreciated! Thanks!

    you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

  • Error message into a Variable.

    Dear users,
    I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
    My requirement is like this:
    I have a message class in which I want to define a text 'Employee number & not found'.
    I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
    So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
    lv_text = e0xx(messageclass) USING '1234'   which stores the text 'Employee number 1234 not found' in lv_text.
    How would I acheive it??
    Thanks, V!

    Try tis way
    message e999(00) with i_emp-empno into lv_text.
    press f1 in message will provide you more details
    a®

  • IPod seen by windows, not by iTunes+ weird error message

    I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
    and why is there no email adress from apple for service qustions? 10x

    I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
    Did you read the document i linked you to? here's another link to it:
    Putting iPod into Disk Mode
    whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
    ... never mind ... i guess you've fixed it anyway ...

  • Error message iPod cannot update b/c all of the playlists no longer exist

    Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
    PC   Windows XP  

    hiya!
    And my playlists are still on the left side in my iTunes. They do exist.
    let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
    is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
    love, b

  • Windows Blue Screen Error Message Appears As Soon As IPod Connected

    Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

    Hi Mike thank you for replying,
    I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
    I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
    If you can help me out or suggest where to search it would be much appreciated.
    Thx

  • IPod Error Message: "The disk could not be read from or written to."

    Hello!
    I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
    I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
    Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
    Any help would be greatly appreciated. Thank you in advance. ^_^
    PowerBook G4   Mac OS X (10.4.3)   15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

    Okay I went thru that entire list and here's what I got...
    (1) My OS is XP and is running fine.
    (2) I've updated my windows
    (3) I don't know of any software that might be interfering.
    (4) There are no damaged files.
    (5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
    (6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
    (7) The USB cord is firmly connected into my USB port and my iPod
    (8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
    (9) I will try another USB cord to see if that works.
    Is there anything else that I can do? Can Apple fix this?
    Please let me know.

  • IPod Touch will no longer sync...error message.

    For some reason my older iPod Touch without a camera on it will not sync any more and I am getting an error message saying this iPod cannot be synced. Now I had it set up to sync over Wi-Fi and I would occasionally hook up to the computer with the cable and got error messages on both. Now I read something about removing the SC Info Folder. If I do that will that mess things up with syncing my iPhone? 

    What is the exact wording of the error message?

  • Error Message: Need to purge Cache in Adobe Bridge CC (on PC)

    I tried purging using Adobe Bridge by going to Edit/Preferences/Cache then purging, but it becomes non responsive.  The error message said the problem files were at Users/(my user name)/AppData/Roaming/Adobe/BridgeCC/Cache.   There are 4 files in there that are taking up 124 GB!  Can I simply delete these files or will it corrupt my regular files?  I tried doing as some other forums suggested and hold the ALT key down when opening Bridge before purging, but no luck.

    Yes, you can delete the cache files manually,  Just be advised that Bridge will become very, very slow until it finishes rebuilding its caches.  Depending on your files, that can take a few minutes or several hours.
    A good way of doing it is at night, so you can do it before going to bed and let Bridge rebuild caches overnight.
    If you can, save the cache files before deleting them to an external drive, so that you'll have them as backup if something goes wrong.

  • Error message when installing Photoshop CS2 in Windows 8

    I just upgraded to a computer with Windows 8.  I use Photoshop CS2.  I am getting the error message below when starting photoshop after installation.  I changed program folders, but that did not work.  Please advise. 
    Error: an error has been detected and activation cannot continue. Please restart your computer and reinstall application.

    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

  • Adobe Photoshop CS2 Error messages after update to mac os 10.4.6

    After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
    I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
    I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
    HELP!

    Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
    Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
    --Ryan

Maybe you are looking for