Error message RunDLL while booting up the Windows 7

Hello,
when i start my laptop i get following error message:
RunDLL
Problem beim Starten von
C:Users \ name of my laptop \ AppData \ Roaming \ shell32C.dll
I am afraid maybe this is virus. My anti-virus programm found 2 virus and stored them.
Thanks in advance for feedback!
Kind regards ... daywalker

>? It would be great if you speak German.
This is a English language community and only English is allowed
As PauPau wrote:
In search window type the command msconfig
Now new window would appear providing different tabs
Choose tab called StartUp
Here check the single entry for something like Roaming \ shell32C.dll
If you will see this, mark it and delete.
Restart the notebook.

Similar Messages

Error Message when I boot iTunes in Windows

This is the error message.
The registry settings used by the iTunes drivers for importing and burning CDs are DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
I've reinstalled iTunes and still get this message. Once I click okay it goes to my iTunes screen and everything appears to play correctly however each time I boot iTunes I get this same error message. Thoughts?
Also, recently my DVD/ROM stopped working and in another discussion with a different solutions page I discovered that the upper and lower filters are missing in my registry that is associated with the DVD/rom drive making the drive unable to read CDs or DVDs. Could this have something to do with the recent behavior of my iTunes program?

The registry settings used by the iTunes drivers for importing and burning CDs are DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
First try rebooting the PC (very important) and then doing a repair install of iTunes. In Add/Remove programs, select itunes, click "Change" and then click "Repair".
If no joy with that, check for a device filter conflict in your registry, as per the following document:
iTunes for Windows: Troubleshooting CD issues caused by device filters

I get a weird error message when I boot up the computer

Every once in a while when I boot up my computer it gives me an error message that says:
"Your computer’s clock is set to a date before March 24th 2001. This may cause some applications to behave erratically."
But my clock is not set to an old date/time. And when I go into the date/time settings to check, they are always set correctly. Why am I getting this message??

it could be logic board problem (just a guess at this point and not a conclusion), unless some software setting changes date/time as was suggested.
logic board is the main electronic board inside, containing processor, video chip etc., it also includes the chip controlling real time and date.
it is possible that the time chip is failing for some reason and it can't be replaced on it's own - the whole board may need to be replaced.
if the iBook is out of warranty it will be to expensive and probably not worthwhile just for the clock problem.
if it's in warranty (1 year from purchase date or 3 years with AppleCare warranty) any authorized service provider will get it fixed:
http://www.apple.com/buy/locator/service.html
you can look up the warranty here by entering serial number for the iBook where it says "About Your Support Coverage":
http://www.apple.com/support/
also someone may have other suggestions on software causes.

Error messages appear while booting Satellite A100

I tried booting my notebook and this error messages are displayed:
system bios shadowed, video bios shadowed,
resource conflict-PCI serial bus controller on motherboard Bus:07, Device:06, Function 01
resource conflict-PCI mass storage controller on motherboard Bus:07, Device:06, Function 02
resource conflict-PCI PCI on motherboard Bus:07, Device:06, Function 03
How can i resolve this prob?

Hi
Looks a little bit like a device conflict on the motherboard.
There is always one device mentioned: Device:06
So possibly all the error messages are related to the same device. Im not quite sure what device 06 could be but I think its miniPCI device and possibly a WLan card.
Try to remove the WLan card from the notebook and check this again.
But before you would do this, go to BIOS and set the BIOS to default settings. Save the changes and boot the unit again.
Check if the message would appear once again

RDC for MAC cannot connect to TS server with error message "You were disconnected from the Windows-based computer because of problems during the licensing protocol".

the mac clients are running RDC for mac version 2.1 and they cannot connect to Windows 2008 R2 TS server. They get the error "You were disconnected from the Windows-based computer because of problems during the licensing protocol".
really appreciated if someone have a fix for this.
thanks,
/dan

Hey,
Any proposed answer for this ?
I face the same problem and my environment
and I've got same results as dle2k
1. TS lic mode is set to per user confirmed it works for windows clients.
2. the TS server's system log logged error "The Terminal Server security layer detected an error in the protocol stream and has disconnected the client".
3. the reports shows per user cal has been issued to users. no temp per device cal has been issued.
4. yes, CoRD works .
5. we tried version 2.1.1 of the Mac RD Client but it also does not work.

Internal Error Message when trying to download the windows OS for Palm.

Whenever I try to either upload from a disk or download from the Palm website, the OS for palm I get a message that says "Internal Error 2738" and it won't let the software load. I am stuck and can't do anything. Please help. Thanks.
Post relates to: Tungsten E2
This question was solved.
View Solution.

Using a search engine, I found this answer in seconds..
http://forums.support.roxio.com/index.php?showtopic=19110
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I set up my AE (2 in different rooms) and then tried to acquire and tried to select and play but got error message -15506 "while connecting to the Airplay device".?

I am using Lion on a MBP with 2 x AE.

One quick update. A workaround that was mentioned in one post did seem to work - if music is started via the Remote app it seems to connect fine.
And I'm not sure if I dare upgrade to iTunes 11 given the firestorm of bad impressions I see, including some that relate to Airplay functions...

Everytime iTunes opens on my Windows 7 pc, I get the error message -42110 while it appears iTunes is trying to download a movie I didn't order. Any suggestions?

Everytime iTunes opens on my Windows 7 pc, I get the error message -42110 while it appears iTunes is trying to download a movie I didn't order. Any suggestions?

Thank you i been looking for a answer to this all day but I couldn't find anything on it! Now I know I will find a file with it! thanks!

Windows error message "Setup could not read the CD you inserted..."

I partitioned my Macbook HD using bootcamp assistant and allowed 32GB for the partition. Then I tried installing windows using the assistant. I only get as far as verifying the windows CD (not far as which file system to use FAT32 or NTFS). Then I receive the error message, "Setup could not read the CD you inserted, or the CD is not a vaild windows CD." I am using the Windows XP Service Pack 2 version - not an upgrade. Also I tried booting up straight to the CD but that did not help either. Any suggestions?

Please disregard my question. Although my Windows XP Pro documentation and folder did not say upgrade I just looked at the CD for the tenth time and just saw Upgrade printed on the CD. I'm not making excuses but the holographic images make the CD a little hard to read. Sorry for the trouble. I guess I will be going out and buying the full version now.

Firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page. What can I do?

After opening certain websites, pogo, firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.
I have had this problem before and had to reinstall an earlier version of firefox.
The error console has a long list of errors, many of them end with: does not implement nsIObserver. Is there a way to send the information on the error console to firefox support?
Redownloading Firefox 4.0 will fix my problem until I either close firefox or turn off my computer. The problem recurs when I open firefox again.

See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes
It is also possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

I am facing the problem on downloading apps from Mac App Store, when I try to install the application from App store, I am getting an error message "Status_Code_Error" while click on "Login"

I am facing the problem on downloading apps from Mac App Store, when I try to install the application from App store, I am getting an error message "Status_Code_Error" while click on "Login"

Same problem here in Brazil.
It seems to be a problem with logging in App Store in the Mac (Yosemite 10.10.2).
When I tried the very same userid and password I was able to login in to use my iCloud account from the same computer and also from my iPhone.

I keep getting this message An unknown error (-15006) occurred while connecting to the AirPlay device " AirPort Express".

Please help. I have been having major difficulties with my Airport Express. It used to work fine but for the last year or so it continually disconnects, skips and ultimately drops out and itunes gives me this message "An unknown error (-15006) occurred while connecting to the AirPlay device “AirPort Express”. I keep resetting, unplugging, restarting Itunes, or my computer. It works for a couple of hours and then I get the message again. It's making me nuts and was a bummer at last week's party when we had no music, yet again. I have looked up the support discussions, but there is no answer as to how I can fix it. I am currently using Mt Lion OS. Does this have anything to do with it? Checked for software updates, but nada.
Any suggestions.

It may be possible the where you have the AX located may just be in a spot where it does not get a good signal even it is only 8 feet away.
I suggest that you download and install iStumbler. You will use it to determine the signal quality by making Signal-to-Noise Ratio (SNR) measurements. This will be easiest if your Mac is a laptop ... or you can borrow one. When taking the measurements, you only want your "main" AirPort running as this is what we want to measure at the location of the AX.
SNR (in dB) = Signal (in dBm) - Noise (in dBm)
You can easily find the Signal and Noise value using System Profiler on your Mac laptop.
ref: Click on the Apple icon on the menu bar > About This Mac > More Info... > Contents > Network > AirPort > Interfaces > en1 > Current Network Information > Find your wireless network > Signal / Noise
While your still in the System Profiler, note the value for Transmit Rate.
These values should be negative numbers. For example, mine currently read: -67 dBm / -95 dBm, with a transmit rate of 27 (Mbps). Plugging in these numbers yield: SNR = -67 - (-95) = 28. My Mac Mini is about four rooms away from my AEBS with about five walls between them. As you can see, the signal is still quite useable ... but the bandwidth is minimal, especially for streaming.
SNR Guideline
40dB+ SNR = Excellent signal
25dB to 40dB SNR = Very good signal
15dB to 25dB SNR = Low signal
10dB to 15dB SNR = Very low signal
5dB to 10dB SNR = No signal
Please post back your results.

I reset my airport express to factory settings, reconfigured it and then try to play it and this message popped up. Where do I go from here? An unknown error (-15006) occurred while connecting to the AirPlay device "John Knox's AirPort Express".

I reset my airport express to factory settings, reconfigured it and then try to play it and this message popped up. Where do I go from here? "An unknown error (-15006) occurred while connecting to the AirPlay device “John Knox's AirPort Express”.

No more need for an answer... the problem has been solved!

GETTING ERROR MESSAGE"You cannot login because the phone is JAL-enabled' while logging into CAD

Hello All,
One of my customer is facing problem while loging into CAD. They were getting an error message"
You cannot login because the phone is JAL-enabled.
JAL-enabled phones are not compatible with CAD".
I gone through some cisco document saying that Join across line/Direct transfer across policy option status should be set to OFF. But i dont find option in 9971 series phone.
Any Reply for this query. Highly Appreciated.

That's because the JAL function is inherent to the 8961/9951/9971 phone and cannot be disabled. You'll need to upgrade to a release that supports this phone model or use a different phone.
Please remember to rate helpful responses and identify helpful or correct answers.

Populating the error message log (while executing BAdI implementation)

Hi there,
I have a BAdI to implement CRM_ORDERADM_H_BADI where it will check certain header data. If there is a certain condition that is met, we must not allow the transaction to continue by adding error message on the top (the red button). How can we populate this error log within the BAdI implementation (putting it in codes in the method of the BAdI implementation).
Many thanks in advance,
Regards,
MuJi

put like this
data:   w_msg type standard table of shp_badi_error_log initial size 0,
        msg like line of w_msg.
if sy-subrc ne 0.
      msg-msgty = 'E'.
      msg-msgid = 'YW2'.
      msg-msgno = '041'.
      msg-msgv1 =
       'PGI not allowed ,Pls Enter Truck No in Bill of lad.Field'.
      append msg to ct_log.
endif.
<b>In BADI u cannt raise Error Messages but u can Post the Messages to Application Logs, So u have to Update ur messages to CT_LOG.</b>Regards
Prabhu
Message was edited by: Prabhu Peram

Error message RunDLL while booting up the Windows 7

Similar Messages

Maybe you are looking for