Error Message Running Application From MS Terminal Server. Ora-01019

Dear folks
I had this problem recently and this is the solution to it.
Applies to:
Oracle Server - Standard Edition - Version: 10.2.0.2
Information in this document applies to any platform.
Goal
#1. How to solve the ORA-01019 when running an application from terminal services without
administrative privileges?
Solution
There is a MS security option that has to be enabled for the non-administrative users.
Please grant "Create global objects" to the non-administrative privileges as indicated at:
http://technet2.microsoft.com/WindowsServer/en/Library/ba351dd0-aaf5-4e1e-b7dc-10a514842a0a1033.mspx
"You can configure this security setting by opening the appropriate policy and expanding the
console tree as such: Computer Configuration\Windows Settings\Security Settings\Local
Policies\User Rights Assignment\"
and retry

Caused By: Error at line:1 col:2 Got character[0] expected a valid XML character
The character in line 1 col 2 is not a valid XML character. Is the line 1 the XML prolog?
<?xml version=“1.0” encoding=“UTF-8” ?>

Similar Messages

Error message running application from Jdeveloper/embedded OC4J

Does anyone know what configuration I am missing to be able to run a web application from JDeveloper with the embedded OC4J.
Here are the error messages that I am getting:
PM oracle.j2ee.jndi.JndiMessages warningInvalidResourceReference
WARNING: Resource reference jdbc/testdev not found. Allowing J2EEContext creation to continue anyway.
Nov 22, 2006 1:46:46 PM oracle.j2ee.jndi.JndiMessages warningNoTypeFoundAtLocation
WARNING: No javax.sql.DataSource found at null
I should be able to run the application from Jdeveloper development environment without deploying to Tomcat after each change.
There must be a jndi configuration that I need the questions is where?
Is this configuration or lack of configuration documented some where by Oracle?
Thanks

Hi, user544716,
did you solved the problem? I got exactly the same problem. In my case, my application runs well with jdeveloper 10.1.2 but when migrated to jdeveloper 10.1.3.1, the emdedded OC4J won't wrok and generated the same error as yours.
Thanks.

Error on running Application from MDK

Hi I am getting the following error When i run any MI project from NWDS-IDE(MDK) Version-09.
Could not stop MI
Initialize framework ...
Use ''-home:<ME installation folder>'' to start the Mobile Engine
Please solve this

hi
give the following in your Runtime Tab.
Main Class: com.sap.ip.me.core.Startup
Program Arguments: "-home:<client installation drive>\SAP Mobile Infrastructure" -trace -app:awt
previously i had said it as some other start as main class. but this is the one. kindly make a note of the change.
This should solve
Regards
Arun.
Message was edited by: Arunkumar
Message was edited by: Arunkumar

While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
== Today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Error when downloading application from Server

Hi,
I have installed MI Client 7.0 SPS 11 Patch 0 on Symbol Device ;OS Windows Mobile5.0
i have successfully completed first synchronization .
After that i assigned Mobile Component to the device and tried synchronizing.
"Error when downloading application from http://<servername>:50000/meContainerSync/servlet/com.sap.ip.mi.http.MobileComponentServlet?Application=xyz&Type=APPLICATION&Runtime=JSP"
Pl. suggest
Note: In NWA under 'Device Maintenance' -> Mobile component
The state of the aplication is "Deployment Activated"
rgds,
Kiran Joshua
Message was edited by:
Kiran Joshua

Hi ALL,
I resolved it on my own guys !!!
Actually while downloading server url consists of hostname bcoz the hostfile entry in windows/system32/drivers/etc/hosts was only hostname.
i entered FQDN name in the hostfile... It WORKED
Being Saturday and Sunday...i cud not get any help from forums...i was really worried and Guys we need to think on this :-?
rgds,
Kiran Joshua

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.d11 was not found." I have uninstalled and reinstalled iTunes multiple times. Am running Windows XP Svc Pack 3. help

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753)

When I try to run iTunes I receive the following error message: "Apple Application Support was not found. Apple Application Support is required to run iTunes helper. Please unistall iTunes, then install iTunes again". I have done this twice. What now?

When I try to run iTunes I receive the following error message: "Apple Application Support was not found. Apple Application Support is required to run iTunes helper. Please unistall iTunes, then install iTunes again". I have done this twice and continue to get the error message. What now?

Hi texasslagle,
It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
There is an article that you may want to use to try to complete your install here -
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Thanks for using Apple Support Communities.
Best,
Brett L

I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!

I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Have a new itouch. I'm having trouble downloading iTunes. I keep getting the error message: Apple Application software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTues again. Error 2.

I have a new iTouch. I'm having trouble downloading iTunes. I keep getting the error message: "Apple Application Software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2." I have uninstalled and tried installing again and get the same error message. What do i need to do?
Lg

Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2

Running LabVIEW applications on Windows Terminal Server

I have built a client application in LabVIEW that one of our users want to run on a Windows 2000 Terminal Server...the question is; how does Windows Terminal Server handle the different sessions; does is launch multiple copies of the application and if so how about support files? In my case the client application has a configuration and a temp file in it's directory...if multiple users use the application on the terminal server; does it or can it be set up to make one copy of the app directory for each session? If not - is there a way / what is the best way to get separate configurations and temp files for each session?
MTO

You have a better chance to get a helpful reply if you ask in the Acrobat forum, or even at http://forums.adobe.com/community/licensing

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Itunes won't install. Error message: Apple Application Support not found

Itunes won't install. Error message: Apple Application Support not found. What is the fix for this?

It is always these four updates that fail. I've tried downloading and installing them seperately from apple downloads. I've tried various recommended fixes, and nothing I can figure out works. Before these problems, itunes worked on the computer for a year.
Thank you again for wanting to help me.
Ken
1) Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243)
Installation date: 12/17/2011 7:58 PM
Installation status: Failed
Error details: Code 643
Update type: Important
A security issue has been identified leading to MFC application vulnerability in DLL planting due to MFC not specifying the full path to system/localization DLLs. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
More information:
http://go.microsoft.com/fwlink/?LinkId=216803
Help and Support:
http://support.microsoft.com
2) Security Update for Microsoft Office Excel 2003 (KB2596954)
Installation date: 12/17/2011 7:56 PM
Installation status: Failed
Error details: Code 57E
Update type: Important
A security vulnerability exists in Microsoft Office Excel 2003 that could allow arbitrary code to run when a maliciously modified file is opened. This update resolves that vulnerability.
More information:
http://support.microsoft.com/kb/2596954
Help and Support:
http://support.microsoft.com/?LN=en-us
3) Update for Microsoft Office Outlook 2003 Junk Email Filter (KB2597035)
Installation date: 12/17/2011 7:56 PM
Installation status: Failed
Error details: Code 57E
Update type: Important
This update provides the Junk E-mail Filter in Microsoft Office Outlook 2003 with a more current definition of which e-mail messages should be considered junk e-mail.
More information:
http://support.microsoft.com/kb/2597035
Help and Support:
http://support.microsoft.com/?LN=en-us
4) Security Update for .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2478662)
Installation date: 12/17/2011 7:52 PM
Installation status: Failed
Error details: Code 80070BC9
Update type: Important
A security issue has been identified that could allow an attacker to compromise your Windows-based system that is running the Microsoft .NET Framework and gain complete control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
More information:
http://go.microsoft.com/fwlink/?LinkID=211424
Help and Support:
http://support.microsoft.com

Error message appears when trying to start server in VM Manager

Error message appears when trying to start server in VM Manager
OVMAPI_4005E No worker server found to perform operation on: OracleVMsrv-1
When trying to restart server:
OVMRU_004007E Cannot perform the operation. Server: OracleVMsrv-1, is not running.

Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

Suddenly my Appleworks 6.29 wont open on my Mac G4 sys 10.4.11. Error message is: Application Launch Failure. Shared Library Error. Appleworks MW_MSL_PPC SHLB Interfacelib "

suddenly my Appleworks 6.29 wont open on my Mac G4 sys 10.4.11. Error message is: Application Launch Failure. Shared Library Error. <Appleworks><MW_MSL_PPC>SHLB><Interfacelib><>"

Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If that doesn't help...
Open Console in Utilities & see if there are any clues or repeating messages when trying to open AW6.

Error Message Running Application From MS Terminal Server. Ora-01019

Similar Messages

Maybe you are looking for