Error Message - SAPLRRK0 and form MEGA_SORT_M_02-02-

HI ,
We have jst upgraded to BI7.3 and i am performing some post upgrade steps.
While running a query i received the below error :
A2,937 SIDs from characteristic ZFWCO0066 are missing (CL_RSDM_READ_MASTER
I>> Row: 24 Inc: CHECK_CX Prog: CL_RSR_OLAP
ASystem error in program SAPLRRK0 and form MEGA_SORT_M_02-02-
RSRV combine test and program RSDMD_CHECKPRG_ALL shows green.
I've checked out and many posting in SDN (not much on MEGA_SORT_M_02-02) error cases. Noticed a post 'SID tables Issue' which is not applicable too.
Appreciate if someone could suggest something on this.
Thank you.
Regards
Maili

Hi,
check for following thread
SID 9 for characteristic ZTACTIC could not be converted CL_RSDM_READ_MASTER
Also looks like some of the master data issue in your thread its is mentioned,just check whether that object is consistent. There are very rare chances of master SID gets deleted during upgrade?
But see if there is any SID conversion error exists IN RSRV transaction. See if you can activate objects in RSD1 and RSD_IOBJ_ACTIVATE transaction.
see if there is any note...else write to SAP..
Worst case you have to reload!!
Thanks and regards

Similar Messages

System error in program SAPLRRK0 and form LRECH_AGGR_BNR-02

Hello experts,
I am facing an issue when executing a query getting the following error
"System error in program SAPLRRK0 and form LRECH_AGGR_BNR-02"
In my query I am using replacement path formula variable, I tried without that formula variable also but still getting the same error.
we are on BI 7.0 & SP14 and searched for OSS notes as well but this error is occuring in SP9, SP12, SP16, SP17 and SP18.
Just wondering if anyone faced same problem and have any interim solution apart from upgrading the Support packs.
Thanks a lot in advance.
Best Regards
VJ

Hi,
Check with links....This is program error.
1. Note 1011069 - System error in SAPLRRK0 and form LRECH_AGGR_BNR-02-
2. Note 961002 - X299: System error in SAPLRRK0 and LRECH_AGGR_BNR-02-
3. Note 1082605 - Termination BRAIN 299 in SAPLRRK0; LRECH_AGGR_BNR-02-
4. Note 993288 - Composite note: Formula vars. w/ replacement path BI7.0 SP09
Regards,
Srini Nookala

System error in program SAPLRRK0 and form LRECH_AGGR_ELSE-01

Hi...
Hope someone can help me with this issue.
Im getting this error in some querys:
System error in program SAPLRRK0 and form LRECH_AGGR_ELSE-01
All of these querys were working fine, suddenly im getting this error and i dont have idea why it can be, maybe a bad configuration on the server or i dont know...
Thanks and regards!

Hi ,
I got the same error message in the following scenario.
I determine the value of calculated key figure KF1 using if else condition.
I have to use KF1 in another calculated key figure KF2 .
I get this error message when I use KF1 in KF2.
I do not get this error message when I do not use KF1 in any of the calculated key figures.
Can you please advise how can I resolve this issue .
Is there any other way to use KF1 in KF2.
Thanks
Srinivas

System error in program SAPLRRK0 and form MEGA_SORT_H-05-

Hi,
Any idea what could be the reason in getting the above error message 'System error in program SAPLRRK0 and form MEGA_SORT_H-05-'.
We are getting this error while executing the query and activating the hierarchy nodes.
Regards
Ramesh Ganji

Which version of BI are you using- lots of notes on MEGA_SORT_H -
also mention your SP Levels.
BW-BEX-ET 956865 Expanding nodes to level n does not work 28.07.2006
BW-BEX-OT-OLAP 602070 Missing leaves in a hierarchy display 07.03.2003
BW-BEX-OT-OLAP 857895 'Suppress results' for the display hierarchy 27.11.2006
BW-BEX-OT-OLAP 989872 # Entries when sorting in descending order by key or text 09.11.2006
Arun

System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-

Hi
when i execute the query on remote cube we are getting the error like below
System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
We have Remote cube acessing the oracle views through ud connect .Can any one please let me know whats the issue is ?.we are using BW3.5 PATCH LEVEL 15

Hi,
see that there is master data deletions.. if so how did you delete the master data.. then check   RSRV to analyse and repair your infocube
or    tablespace problem (PSAPTEMP), check with basis.
check transaction sm21, there may contains tablespace name. ask your basis to fix the tablespace PSAPTEMP problem. after that you should be able to execute the report
or Go to ST22 and check the shortdumps ( few) and follow the debugger to know the actual cause... it   could be errors in the info object mapping ....

OHJ Error Message in 9i Forms Developer 9.0.2.0.0

When I click on Help/Online-Help in my forms builder I get in the calling terminal..
View passed to KeywordDataSource does not contain data in a TopicTree format
oracle.help.common.xml.XmlParseException: IO Exception Thrown by tokenizer:Null
at oracle.help.common.xml.XmlParser.<init>(Unknown Source)
at oracle...
*etc*
My Help Index, Contents and Navigator work fine but when I double click on a topic
the window pops up blank. The only ones that have info in them are the Error Message ones(and maybe some others havent checked them all). I tried to go to a oracle link to download the formshelpjars03.zip file as maybe I need updated jars but the link is broken.
Anyone have these jars or know of this problem? Thanks.

Update: Some sections of the Help work fine(little book thingees), others are totally blank.

Error message "Not Well Formed." Can this be repaired?

Help!
I have been attempting to open an InCopy (CS6) file, but it will not open. Instead, I get this error message:
"Not Well Formed"
Is there any way to repair this file? It was checked in and saved normally. If it cannot be repaired, I will lose about 1 month's worth of work because my backup has failed. I would appreciate any guidance

Firefox has no built-in email features, if you are using Firefox to access your email it will be a web based email service and email features will be part of the email service. You will need to check with the support for the email service for how to do this.
If this questions is about Thunderbird, for Thunderbird support you can ask in one of these forums:
* http://forums.mozillazine.org/viewforum.php?f=39
* http://getsatisfaction.com/mozilla_messaging

HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

Click here and follow the instructions.
(98724)

TS4425 when trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's

I receive error messages when I am downloading free iphone apps. I get error message 9810 and 9834. Can anyone advise how to resolve this problem?

I receive error messages when I am downloading free iphone apps. I get error message 9810 and 9834. Can anyone advise how to resolve this problem? The problem doesn't exist when I'm downloading apps for which I pay.

Hi,
See Here:
http://support.apple.com/kb/TS1276
From Here:
http://support.apple.com/kb/TS1424

Error message R6034 and Error 7 (windows error) 1114

Hi!
I have tried installing the latest itunes update and it has failed. I get the runtime error message R6034 and Error 7 (windows error) 1114. I have tried many times, uninstalling and reinstalling the versions as advised in some of the related threads but still face the same issue. I am now unable to get in Itunes. My computer runs on windows vista, 32 bit. Please advice resolution.
Thanks,

Doublechecking. Have you worked through the following user tip?
Troubleshooting issues with iTunes for Windows updates

TS3694 I keep getting the error message "-42408" and all of my apps got deleted on my iPhone. It says that I need to authorize my computer, so I tried than and that's when the error message showed up. I'm pretty ****** and want my apps to be back on my iP

I keep getting the error message "-42408" and all of my apps got deleted on my iPhone. It says that I need to authorize my computer, so I tried than and that's when the error message showed up. I'm pretty ****** and want my apps to be back on my iPhone. Please help.

What version of iTunes are you using? The error you references seems to be connected with iTunes 9.0.4. That version of iTunes is not compatible with iOS 6. You need to update to the current version of iTunes.

Error message -2 and -12345

Hello out there,
I've seen other people ask about these error messages on encoding with DVDSP4 but never seen a satisfactory answer.
On the record: does anyone know what these error messages mean, and even more importantly, how does one resolve the issue?
for my specific background info, see my post about the DV PAL QT file not encoding from earlier today.
and thanks to everyone who posts and answers in this forum.
BBP

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

TS1372 I have an error message 1601 and yet I am referred to error messages in the 1400s. Is this the same issue?

I have an error message 1601 and yet I am referred to error messages in the 1400s. Is this the appropriate article for figuring out why itunes does not recognize the ipod? Apparently, this is preventing my device from loading new music.

Try this one: http://support.apple.com/kb/TS3125

Raise_application_error is not displaying error message in my form

Hi,
I have created one procedure in order to display the error message in front end forms.But which is not display the error message in my form when call the procedure.
Please refer the code.
BEGIN
IF C_ERR%ISOPEN THEN
CLOSE C_ERR;
END IF;
OPEN C_ERR;
FETCH C_ERR INTO M_ERR_ARB_DESC;
CLOSE C_ERR;
RAISE_APPLICATION_ERROR(-20001,P_ERROR_CODE||' - '||M_ERR_ARB_DESC);
END;
Thanks & advance
Regards
Maran

Hi,
-------form program unit------
PROCEDURE RAISE_APP_ERR(P_ERR_CODE NUMBER) IS
alert_button NUMBER;
Raise_Exception EXCEPTION;
PRAGMA EXCEPTION_INIT(Raise_Exception, -20001);
BEGIN
--- called backend procedure
PRC_RAISE_APPLICATION(P_ERR_CODE);
EXCEPTION
WHEN Raise_Exception THEN
alert_button := SHOW_ALERT('raise_alert');
If alert_button = ALERT_BUTTON1 Then
Raise FORM_TRIGGER_FAILURE;
End If;
END;
---------- db proc----
CREATE OR REPLACE PROCEDURE PRC_RAISE_APPLICATION(P_ERROR_CODE IN HRM_ERR_CODE.HEC_ERR_CODE%TYPE
) AS
CURSOR C_ERR IS
SELECT HEC_ERR_ARB_DESC
FROM HRM_ERR_CODE
WHERE HEC_ERR_CODE = P_ERROR_CODE;
M_ERR_ARB_DESC HRM_ERR_CODE.HEC_ERR_ARB_DESC%TYPE;
BEGIN
IF C_ERR%ISOPEN THEN
CLOSE C_ERR;
END IF;
OPEN C_ERR;
FETCH C_ERR INTO M_ERR_ARB_DESC;
IF C_ERR%NOTFOUND THEN
M_ERR_ARB_DESC := 'UNKNOWN ERROR ';
END IF;
CLOSE C_ERR;
RAISE_APPLICATION_ERROR (-20001, P_ERROR_CODE||' - '||M_ERR_ARB_DESC);
EXCEPTION
WHEN NO_DATA_FOUND THEN
RAISE_APPLICATION_ERROR (-20001, P_ERROR_CODE||'-'||'UNKNOWN ERROR ');
END ;
I tried the same but still i am not getting error message in Forms.

Error Message - SAPLRRK0 and form MEGA_SORT_M_02-02-

Similar Messages

Maybe you are looking for