Error message saving MPG files
Following on the preveous post, I am trying to save the file as a regular MPG (not m2t) but whenever I select NTSC I am getting an error message (when it is over 95% done with creating the file). I tried it with many different input files and two projects. Any ideas what's wrong and what can be done about it? Thank you! I just want to have a
simple mpg output file...
The yellow indicator on your timeline could also indicate a mismatched or challenging source video format and that may be overloading your program. (This is further indicated by the fact that your video does not fill your video frame.)
What model of camcorder is your video coming from and what format and resolution is it? How did you get it into your computer?
When you go to Edit/Project Settings, what settings are listed for your project.
Similar Messages
-
I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.
Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR -
Error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was
I recently purchased/upgraded from Premiere Elements 5 to Premiere Elements 9 and I cannot open the projects in version 9 that were created with version 5. It shows it as offline. I get a message to open up a file and when I do i receive the error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was created with 2 audio channels. Can someone help me or tell what I am doing wrong? All of my projects that were completed in version 5 cannot be opened up in version 9.
Thank you.Bill,
I ran G-Spot on one of the files and here it what I have:
DVD "VOB" format
MPEG-2 Program Stream << { 1 vid, 1 aud }
Sys Bitrate: 10080 kb/s VBR
I guess I am really confused. The project that I am trying to open PrE 9 was completed in PrE 3 w/templates , scenes, etc. The movie was burned to a DVD. I cannot understand why I cannot open it with a newer version of PrE. According to G-Spot (I am assuming this is what you mean above), it is already in 2 channels. To me this should be ok. I put many, many hours into these videos and now it seems all for not.
Here is what I did so far:
I uploaded the required media files to a new project in PrE9 and let them index and conform. I saved the project with the same name in a different location. Do I have to do this to the project files and/or the original media files? Confusion starts here.
The next step is where I am confused. I do not know if I am proceeding in the right direction from here. There is the share tab in the upper right hand corner. Is this what you are talking about? I am truly lost from here.
Thanks. -
Error message says "the file archive part of photoshop elements 11 is missing"
I made a purchase that included a free software bundle with Photoshop elements 11 yesterday and have now downloaded both files 5 times, followed all the information I have been able to find on the forum threads but still have the error message
error message says "the file archive part of photoshop elements 11 is missing"
I am at my wits end as I really want to get this downloaded. Have been using elements 8 for years and love it but wanted to update it to 11 and this was going to be perfect but has turned into a 15 hour nightmare trying to get some where with it.
Can anyone please help me out before I stake my pc?
Any advice would be appreciated.Hi Summer,
The error message you are getting is indicative of the missing files for the installer to get started with the installation.
Navigate to the location where you saved your download. If you see any files ending in ".part" then the download did not finish. ".Part" files are temporary files replaced by .7z, .exe, or .dmg when the download is complete.
For Windows the Photoshop installer has 2 files - one with .7z extension and the other with .exe
Make sure you have downloaded both the files in the same folder. Run the .exe file to start the installation.
Alternatively you can try downloading the files from the direct download links available at : http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
Please make sure you follow the important steps mentioned on the page before initiating the download.
Regards,
Ravi -
My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
So frustrating! I open the photo. Edit by cropping, adjusting color, etc. It's perfect. I click DONE and move on to the next. When I come back, the first photo is gone. I can see it in the album but cannot open it. When I look at the file information, it shows zero KB. If I move it to the desktop and try to open it, the error message says the file is empty. I can revert to original and there it is. Edit again, and again it disappears. What am I doing wrong? I am using iPhoto 09
You shooting with a Nikon? We've seen a few examples of this bug with Nikons on 09 and 10.6, with no solution except to upgrade.
Regards
TD -
I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel."
How do I fix this?Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Error message "cannot locate file"
I purchased a new computer and used Detto Intelli Mover to transfer all my music files. When I opened the library, they all appeared to be there, but when I try to plan anything I get an error message "cannot locate file" This happens with all of my 1,200 songs. The error message also says "would you like to look", but I am unable to locate then. Can anyone help with this?
Have you added all the songs to the library? Just by dragging and dropping?
-
Error message c:\program files (x86)\itunes\ituneshelper.exe r6034
can not log into itunes, get the following error message: c:\program files (x86)\itunes\itunes help.exe
R6034
I have uninstalled and reinstalled and still unable to loginApple's advice on this issue can now be found here: TS5376: iTunes 11.1.4 for Windows: Unable to install or open.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See the user tip Backup your iTunes for Windows library with SyncToy for a suggested strategy.
If you have difficulty downloading the iTunes setup file try clearing your browser's cache or using an alternate browser.
If content is missing from the library following the repair see Empty/corrupt iTunes library after upgrade/crash.
For device connectivity issues following the repair see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
MobileMe is a discontinued service and should be removed if present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
tt2 -
I installed iTunes 64 on a Windows 7 (Home) HP Pavilion and received this error message. the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Please help!
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
After years of using iTunes on my G4 suddenly it won't open. Error message says "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes". What do I do? I have been attempting to move my Library to a newer MacBook Pro.
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??
hello!
i have a similiar problem:
i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
thanks, florian -
Download error message - "Cannot Create File"
Recently I developed a problem and am unable to download anything (files, software, etc) from any website. I begin a download, the download manager comes up and it shows an error message "Cannot Create File." I am using the default manager that is incorporated in OS X 10.3.9.
I never had a problem until a week or so ago when I downloaded a software demo. I decided to get the full software package and trashed the demo files per the company's instructions. I got the error message when I tried to download the full program and now get the message no matter what I attempt to download. Might I have trashed a file I wasn't supposed to trash?
I tried installing 10.3.9 again on my main drive but still have the problem. If I use an external hard drive with spare copy of 10.3.9 and make that my start up drive, I can download files successfully.
Any help would be greatly appreciated.
Dave
2002 DP 1GH Quicksilver Mac OS X (10.3.9)Recently I developed a problem and am unable to
download anything (files, software, etc) from any
website. I begin a download, the download manager
comes up and it shows an error message "Cannot Create
File." I am using the default manager that is
incorporated in OS X 10.3.9.
I never had a problem until a week or so ago when I
downloaded a software demo. I decided to get the full
software package and trashed the demo files per the
company's instructions. I got the error message when
I tried to download the full program and now get the
message no matter what I attempt to download. Might I
have trashed a file I wasn't supposed to trash?
I tried installing 10.3.9 again on my main drive but
still have the problem. If I use an external hard
drive with spare copy of 10.3.9 and make that my
start up drive, I can download files successfully.
Any help would be greatly appreciated.
Dave
2002 DP 1GH
Quicksilver Mac OS X (10.3.9)
I have the same problem ! Not being able to download a file from the Adobe site. I need Reader 7 to download some files from exact exams but can't do it. Just keep getting the Cannot Creat File message in the download window. Can anyone help?
eMac 1.25 & G4 800 iBook Mac OS X (10.4.5)
eMac 1.25 & G4 800 iBook Mac OS X (10.4.5) -
Adobe Acrobat gives an error message "The key file is missing, canceled"
Hi,
Adobe Acrobat gives an error message "The key file is missing, canceled" this is a direct translation of the Finnish error message. Acrobat is already re-installed. The operating system is Windows Server 2008 R2, and there is also installed Adobe Reader X.
BR
HeikkiPlease let us know do you see this error on every launch of Acrobat?
Recommended is to have latest version of Acrobat and Reader. i.e. 10.1.8
Try updating application and then see if you still encounter the error. -
I keep getting the error message "Missing PDFMaker files Do you want to run the installer in repair mode"when I try to convert a file into a pdf. I have tried uninstalling then reinstalling but I continue to get the message. I am able directly print file, but there are some errors in the pages, but some of them have font errors. Please advise.
Hey Suzanne,
Could you please let me know what Acrobat version are you using and what kind of file are you trying to convert to PDF.
If you are using an MS Office application, then PDF Maker has to be an active plug-in for the PDF conversion.
Have you tried using Print to PDF option from the File menu for the same?
Please check and then let me know.
Regards,
Anubha
Maybe you are looking for
-
Count() function with selective criteria?
I'm struggling with what I would expect to be a fundamental reporting concept in CR. Suppose I have the following EMPLOYEE table: u2022 EMPLOYEE.ID u2022 EMPLOYEE.GENDER_CODE u2022 EMPLOYEE.MANAGER_FLAG I need to generate a statistical summary report
-
Can I connect a Mac running Snow Leopard to Windows Small Business Server
I'm running the OSX 10.6.8 and want to connect to applications running on Windows Small Business Server 2008. Is this easy or difficult or impossible?
-
Yo, so I know how to set custom ringtones for different contacts and i know all about checking the exceptions box but i cant get the phone to stop vibrating before someone with a custom ringtone calls. I just need to know if there's a way to remove t
-
Add segment in Idocs Error Idocs Document date 00.00.0000 is incorrect in item
Hi every body , I have the idocs WMMBXY with error <Document date 00.00.0000 is incorrect in item > because one segment is missing E1MBXYH in this idocs How can i add this segment <E1MBXYH > to process my idocs Thank you
-
All wireless networks disappears time to time
sometimes the macbook cannot fined any wireless networks even not mine, at the same plase you have had connected with the same MB PRO. The problem is not with the router cause it cannot finde any other wireless networks which i'm pretty much sure tha