Error message says "an ipod has been detected but it could not be identified. We've disconnected the ipod and reconnected it but it hasn't worked.
error message says "an ipod has been detected but it could not be identified. We've disconnected the ipod and reconnected it but it hasn't worked.
If the iPod was originally formated to your computer, restart your computer. If not - How to use your iPod to move your music to a new computer
Similar Messages
-
I get an error message - an I pod has been detected but it could not be identified properly this happened after I downloaded a newer version of I Tunes does anybody have a quick fix??
Hi positive29,
Welcome to the Apple Support Communities!
I understand situations like yours can be very frustrating. I would recommend the attached article to help you troubleshoot and resolve this issue.
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Have a great day,
Joe -
Error message saying Apple ID has been disabled
looking for some help!
I'm trying to enter a new ITunes card number to my acount and I'm getting an error message saying my Apple ID has been disabled. Any ideas on how to fix this so that I can enter the card number?Depending on why it's been disabled, you might be able to re-enable it via this page : http://appleid.apple.com
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ -
I get the message "Your Apple ID has been disabled" everytime I try to purchase a song. I can't seem to find anyone with Apple who can help me!
Hi Debbio , Contact your bank they may have disabled your credit/ debit card because of an unusual amount of small purchaches of APPS , ALBUMS etc....... Has your name been changed if so create a new Apple ID and RELAX. BANKS TREAT THIS AS FRAUD they may need you to confirm you purchased them APPS.?
Debbio wrote:
I get the message "Your Apple ID has been disabled" everytime I try to purchase a song. I can't seem to find anyone with Apple who can help me!
Jack
ASPV Supervisor -
When I click on a hyperlink in an email (Outlook), I get the error message "This operation has been cancelled due to restrictions in effect on this computer " and it won't open the hyperlink. None of my Outlook settings are blocking the hyperlink. How can I fix it?
When I click on a hyperlink in an email (Outlook), I get the error message "This operation has been cancelled due to restrictions in effect on this computer " and it won't open the hyperlink. None of my Outlook settings are blocking the hyperlink. How can I fix it?
-
I need help. I have tried it with the cord that came with my 6, as well as my iPad mini cord, and no matter what cord i use, it still shows "your phone has been disconnected", and no one is disconnecting the cord.
http://support.apple.com/kb/HT4137
How to restore as new.
and this for itunes message
http://support.apple.com/kb/HT1808 -
Why will my iPad not SEND email but will receive email?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
and i can't transfer my purchases for 86 days. surely we can use two seperate accounts on the one pc. the only other pc's we have are ipads and we cant sync our ipods using them. thanks in advance
Set up a seperate PC user account on your PC and use that for yourself or your wife. The iTunes library is associated with the PC user account.
-
I am trying to update the new OS system on my iPhone 4, however, when I connect to iTunes and try to download, I keep getting an error message that says the connection is not established. I ran a diagnostics test and everything passed, however, I'm not sure why I keep getting an error message when the software is at the end of downloading.
Any tips?Disable your firewall/security software.
-
Help me how can i put/activate my icloud account
If you are getting that message you will not be able to create a new iCloud account on your phone because the maximum number of accounts has alread been created. Your only options are to either re-use one of the accounts previously created or create a new account using a different iOS device or Mac, if you have one.
-
Having installed an upgrade for Photoshop Elements 13, I cannot open the application. I get an error message saying "Adobe Photoshop Elements Editor cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop Elements Editor works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X".
I have since uninstalled and reinstalled the app, but get the same error message.Which version of OS X do you have? It's not clear from your post whether "installed an upgrade" means you just installed PSE 13 as an upgrade or you installed an update to PSE 13, like ACR 9 or 13.1. Please clarify.
-
Itunes will not recognize my Ipod Nano 5th g. It shows up on my computer. But Itunes gives me a message that says "An ipod has been detected, but it could not be identified properly. I did all the steps in the ipod assistant. Unistalled and reinstalled drivers and itunes. restarted ipod and even erased everything. It is recognized by other computers. And itunes recognizes my iphone fine. please help.
Have you restarted your computer? iTunes updated?
-
what do i do when i try to open my ipod nano in itunes and it says "an ipod has been detected, but could not ne identified properly"
Hello rachel167,
I would use this:
iPod nano: Error message saying that iPod 'could not be identified ...
Ensure you use every step.
Hope this helps.
~Julian -
"An iPod has been detected, but it could not be identified properly" error
We have had five iPod Nano's installed via our home computer (Dell PC - Windows Vista):
one 2nd generation (currently being used)
one 3rd generation (not in use - was lost)
one 4th generation (not in use - was stolen)
two 5th generations (currently being used)
The iTunes 10.0.1 Update was installed during the first of the two 5th geneartions installation process.
We recently bought another 5th generation. When we went to install it, we received the error message "An iPod has been detected, but it could not be identified properly". The 2nd generation can access the entire library and download music but the two 5th generations are no longer able to access the library and download music. Basically, they can only be used to listen to the current music within does 5th generation iPod Nano's.
We tried everything that's been recommended in the Support section but nothing has worked in order to restore the capability of accessing the library and downloading music for the 2 generations....This is where we need HELP!!!
As for the new 5th generation, we have installed it into our laptop instead with no problems (so far). We've read that there is a way to move the iTunes Library from one computer to another which we hope this will be an option once we fix the issue of the two 5th generations.
If anyone can provide any recommendations please post. We have spent the better part of our weekend trying to fix this problem with alot of frustration along the way.
Thank youUninstall everything from your pc that is published by Apple. This includes; iTunes, Quicktime, and Bonjour. I also had this problem and it is VERY frustrating. Then re-install iTunes of course.
-
I have an iPod Touch version iOS 4.2.1, 8 G capacity, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails. I have tried deleting and reinstalling iTunes, and the same thing happens. What can I do to fix this problem?
Try:
iOS: If you can't back up or restore from a backup in iTunes
Maybe you are looking for
-
How can we load images from database to macromedia flash?
Dear All, Actually I'm creating a intractive CD with images(Catalogue) loaded in access db. I don't want every user to install the program into his pc. When he/she inserts cd it should play and display images by category wise (9 pictures at one time)
-
How to create the folder in presentation server through pop-up(
Hi Experts, Can u give me the solution , how to create the folder in presentation server through pop-up(means dynamically, after executing the program , pop-up has to come to create the folderand path) regards ram.
-
Is it possible to add the Album Illustration I scanned myself?
Hello, *Can I Import Album Illustrations I Scanned Myself?* I use iTunes to play music at home and I own an iPod-Touch for on the road. It's nice to be able to see and/or search through the Album Illustrations. Most of the songs and albums I bought a
-
How machine get IP address from particular subnet Like we have DHCP server where three scopes are configured & I want to assign IP address from SCOP B to my new machine how can I to do that please suggest.
-
Pls Help! Adobe reader 9.0+ generated barcodes on pre-print is problem
hi to all, I have a really strange problem and would like to share with you. Im generating the barcodes on the pre-print event, using LiveCycle Designer 8.0. Everything is ok when im trying to generate 2/3/4 barcodes in my form. The PROBLEM is if I d