Error Message says try again later?
When I try to open Muse, I get an error message...says try again later. Well it's been two days later and I'm still getting the same message. I've changed my password thinking that might help but it didn't. Any advice??
carly
Hi Carly,
What is the exact error you are getting? If it is I-200 error, then please try the steps given in this article : http://helpx.adobe.com/muse/kb/unexpected-error-occurred-i-200.html
If its some other error, please provide us the exact error message and we'll further investigate the issue.
Regards,
Aish
Similar Messages
-
I rented a movie but it wont play. Getting error message to try again later.
I rented a movie but cant get it to play on my apple tv. Getting error message to try again later.
I have the same problem. Rented a movie, cannot get it to play. I don't seem to be having internet connection problems (sucessfully streaming HD content from Netflix right now on the same device) and I have rebooted and even reset the AppleTV device already with no improvement.
Something going on in a data center somewhere at Apple tonight? This stuff used to work fine.
john -
My ipod touch is all of a sudden not letting me do anything that requires using my password. I can't buy anything and I can't check my purchases. Every time I put in my password I get an error message and it says try again later. This has been happening for 4 days now. I can play my existing games just fine. I can access my itunes store through the internet just fine with my password, but just not on my ipod touch. I sent an email to the itunes support store 3 days ago and have not heard back from them. Does anybody have any suggestions on why this is happening all of a sudden after having the ipod for almost 2 years?
Something you can try is resetting it all Settings > General > Reset > Reset all settings. Or go to Settings > Store & sign out & log back in. Another thing you can do is restore your ipod. This has happened to me but the only thing i did was that i created a new account but try doing the things above i just told you. :)
-
How do I get my daily crossword to print. Message says try again later.
Hp Photosmart 6510 wireless. Trying to use apps already installed on printer, but the crossword does not work, even though it is installed.
Hi Sparty517,
I have a couple of questions for you. Do you get that message on any other apps on your printer? Have you setup ePrint? For now I would try unplugging printer and router for about a minute and then plug them both back up. I would try again to access the app.
Let me know how it goes. -
I was able to watch other content (including HD Previews of movies we hadn't purchased) os the network connection shouldn't have been the problem. Just a spinning wheel and Rumplestiltzken turning my time into Apple's gold. Now I am on the support pages and can't find a simple selection to request a credit for the movie we won't get to watch because the 24 hour clock started when we started watching it and is now at about 10 hours with me just arriving at work. I also considered pulling it down to my MB Pro, but found out that since I started the download on my Apple TV, if I wanted the same movie on my MB, I would have to pay for it again... I am less than pleased so far with Apple TV.
Okay, so istumbler says my connection goes to yellow when I go to the Aple TV location, but my internet speed is greatly increased tonight (20Mbps on speedtest.net near the router and 15.49Mbps at the Apple TV). Upload is unchanged at a little under 1Mbps). I did manage to get the Apple Contact location and I am sure they will post a credit for the movie (since their logs will show repeated attepts to download and no joy, although we both know they won't go to the trouble to look at them). As far as I'm concerned, it was a one-time problem and until it happens again to me, I will remain convinced it was on their end of the connection or in between (although that was unlikely). I've been administering and managing netowrks for over 20 years and am pretty confident that the connection on my end was working.
-
Please help! I have written itunes support, who will get back when it is too late probably. My bank will not cancel my multiple mistaken purchases. It is not possible to call Apple about iTunes store purchases. My order does not show up on my account in iTunes, but 10 awaiting purchases shows up on my bank account. This makes my bank account empty! How can I cancel my order ASAP?
We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email addresses from your post (it's not a good idea to post personal info on any public forum).
You should have been able to try resending the gift to his email address, and not buy another one. Resending gifts : http://support.apple.com/kb/HT1541
He's checked the spam folder on the email account that you sent it to as well as the inbox ? You could try resending it, as per the instructions on the above link.
For the third card, you can either try resending that as well, or you can contacting iTunes Support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
When i try and download an app i get an error message saying 'error 1004 please try again later' what is this, and what shall i do?
That's what I found about error 1004 in this article: http://support.apple.com/kb/TS1275
Error 1004 and 1013: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to default on Windows. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
I have a new MacBook Pro 15" Retina with OSX Mountain Lion 10.8.3 (just did the combo update)
iPhoto 11 (9.4.3) is installed and freshly updated.
I used to share photos from iPhoto directly from my previous computer (a 2009 MacBook Pro running OSX Leopard).
It doesn't seem to work anymore on my new computer. When I try to connect to facebook, I keep having the same message :"An unknown error occurred, please try again later".
I am in China, where Facebook is blocked, but I have a VPN on (Astrill), simulating a connection from LA. I have no problem at all to access Facebook from Chrome, Safari and Skype.
I am sure that I am typing the right username and password.
I made sure iPhoto wasn't blocked in my facebook app settings.
I tried to delete the account, closing iPhoto and relaunching. It still does not work.
I tried to delete the com.apple.iphoto.plist from Library/Preferences (as suggested on another thread in this forum). It didn't do anything.
It is getting very frustrating and I really don't want to throw my new computer through the room. Anyone managed to solve this issue ?
Thanks.It is peculiar, that Chrome, Safari, and Skype can access FB, but not the iPhoto uploader.
Do you see any error messages/ diagnostics in the Console Window, when you try to connect to Facebook?
Launch a Console window from Applications > Utilities and clear the Console Window. Then try to upload. Are there any new messages?
And also launch a Terminal and have a look, if "facebook.com" is properly resolved:
Type
ping facebook.com
into the window. Do you see any transmissions? What is the IP address used?
I see:
PING facebook.com (173.252.110.27): 56 data bytes
64 bytes from 173.252.110.27: icmp_seq=0 ttl=243 time=110.486 ms
64 bytes from 173.252.110.27: icmp_seq=1 ttl=243 time=109.365 ms
64 bytes from 173.252.110.27: icmp_seq=2 ttl=243 time=110.101 ms
64 bytes from 173.252.110.27: icmp_seq=3 ttl=242 time=109.829 ms
64 bytes from 173.252.110.27: icmp_seq=4 ttl=242 time=111.323 ms
64 bytes from 173.252.110.27: icmp_seq=5 ttl=242 time=110.346 ms
64 bytes from 173.252.110.27: icmp_seq=6 ttl=242 time=110.708 ms
64 bytes from 173.252.110.27: icmp_seq=7 ttl=242 time=112.685 ms
64 bytes from 173.252.110.27: icmp_seq=8 ttl=243 time=124.256 ms
64 bytes from 173.252.110.27: icmp_seq=9 ttl=243 time=112.106 ms
^C
--- facebook.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 109.365/112.120/124.256/4.159 ms
Try the same with "dig":
dig facebook.com
; <<>> DiG 9.8.3-P1 <<>> facebook.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25051
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;facebook.com. IN A
;; ANSWER SECTION:
facebook.com. 775 IN A 173.252.110.27
;; Query time: 11 msec
can you "ping" facebook? -
HP Officejet Pro 8500 A910 Scan to email failure Error Server Failure Try again Later message
HP Officejet Pro 8500 A910n ( CM758A ) Scan to email failure Error Server Failure Try again Later message
Ran HP Print & Scan Doctor - finds no problems. When sending a scanned document to the user email it has " Error Server Failure Try again Later " message . Can run test to the scanner without any errors. Tried to reset the printer - same result.
Any help would be much apreciated. AHuberHello there! Welcome to the forums @TheShadow42 ,
I read about the scan to email issue you are having and I will gladly try to help you! I would suggest checking your scan to email settings from the EWS, and perhaps run the scan to email wizard again. You should also see a scan and test option in the setup.
Here is a link to the User Manual, that has quite a bit of great info. Check out page 62 for the scan to email information.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Macbook Air MD 760HN/B with OS X 10.9.4
4 GB RAM, 1.4 Ghz intel Core i5
Problem 1
I. On Youtube whenever I try to play a video, I get a message on a black screen "An Error Occurred, Please Try Again later. Learn More."
2. I think it is some setting problem, being a new mac user, I am unable to sort it out.
Problem 2.
How to select more than one file in a folder to copy or delete. like it can be done in Windows with shift Click together.
if one has to select say, file 25 to file 37 in a folder with 75 files. select all (command A) works but I cannot select few continuous files.Macbook Air MD 760HN/B with OS X 10.9.4
4 GB RAM, 1.4 Ghz intel Core i5
Problem 1
I. On Youtube whenever I try to play a video, I get a message on a black screen "An Error Occurred, Please Try Again later. Learn More."
2. I think it is some setting problem, being a new mac user, I am unable to sort it out.
Problem 2.
How to select more than one file in a folder to copy or delete. like it can be done in Windows with shift Click together.
if one has to select say, file 25 to file 37 in a folder with 75 files. select all (command A) works but I cannot select few continuous files. -
FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. The message says "FaceTime (iMessage) Activation: Could not sign in. Please check your network connection and try again". My network is perfectly alright as I keep buying on the App Store. can u please help out???
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset. -
'''Hi,
my 14.1 firefox , websites with flash contain-like game website - or videos don't work & youtube after I press the play button give me a message say "an error occurred please try again later", I 've tried to reload the flash again but nothing seems to work out?
Thank u..'''
''Duplicate post, continue here - [https://support.mozilla.org/en-US/questions/934607]''Can you open up your Real Player and tell me what version you have? I think Real Player 15.0.6 is supposed to fix this problem. There was a conflict between Real Player and Flash this whole summer that broke Flash videos. Real Player released a update that might help in your case.
If that doesn't help, I think a addon might be to blame here. So do this:
<br> '''Firefox button <img src=https://support.mozilla.org/media/uploads/images/2012-03-27-09-22-48-1204f1.png> > Help > Troubleshooting Information'''
<br> (or '''Tools > Help > Troubleshooting Information''')
Then click the "Copy all to clipboard" button then paste it here. It will tell us what addons you have installed and I can see which one might be causing problems. -
I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- EvenstarlineHi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account. I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well. I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline -
Every time I try to mirror my iPad 2 to my Apple TV it says "error has occurred try again later" any suggestions out there? Simply trying to watch what's on my iPad on my tv
I would go over the wifi routers settings verifing that it does not block the required ports
-
Bb 9300 app world doesnt work it says a error has occured try again later
My app world does not work it says "a error has occured try again later" every time I try log in, I hav a blackberry I'd and it use to work on the old version, does any1 no hw to fix it
Hi!
I too faced similar difficulties when I was trying to get things goings (bb protect is still beyond me!)
So, if I might knidly have an addendum to the OP...... I had to try the different name dance also, and now have a pile of apps where i have to try to recall which name worked for that app, because as little as an hour later, the id would be rendered ineffective.
Is there anyway to merge this dispirate IDs?
Thanks for your time!
S
I'm here. I'm weird; get used to it.
Maybe you are looking for
-
Apps no longer found on App Store - despite long been "Ready for Sale"
As discovered yesterday, all our paid apps have been "lost" from the iOS App Store. An alert saying: "Your request could not be completed. The item you've requested is not currently available in the US store." ...appears instead. Nowhere are they to
-
Jstart.exe can not start in sapmmc
when i start our nwce instance, jstart.exe can not start.The error message like below: M [Thr 4520] Tue Jul 05 17:42:12 2011 M [Thr 4520] ***LOG Q0I=> NiPConnect2: 192.168.1.44:3201: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 31
-
4.7 proxy can accept 10 or more messages in the same xml from XI ?
Hello All, I have to send message from XI to R/3 using ABAP proxy. In the XI , the target structure in mapping is 1: unbounded. How does the ABAP proxy handles if there are 10 xml messages coming in from XI for example? I have an R/3 version of 4.7.
-
Date in WebProxy Server 3.6SP7 or previous versions missing?
Hi everybody. I don't know if this product is valid to answers, but I will do my question in this forum: I installed iPlanet Web Proxy Server 3.6 SP7 in Solaris. When I run a telnet command to connect to default port 8080, and I write the next instru
-
Photosmart 475 cuts top of picture off when printing
I have a Photosmart 475 and have not used it very much until now. Whenever I choose a picture(s) to print, on the screen they look fine but when they print the top of the picture is cut off. This has resulted with many heads cut off in the photos. I