Error message SE508 while create Service Entry Sheet (ML81N)

Hi,
In client production system we are facing problem of getting error message SE508: Error in account coding allocation just after we click "adopt services"tab while creating service entry sheet (with respect to PO)Tcode ML81N.Please analyse the problem and give us solution as why it is happening? Please look at error screen shot with steps followed (in attachment) for your reference.
ML81N>Select PO>Enter>goto entry sheet create (empty page)>service entry sheet displayed with internal no. assigned >click tab "service selection">Input PO No.> click "adopt services"> here we get error message "SE508":ERROR IN ACCOUNT CODING ALLOCATION
Regards
Rahul Shukla

Hi,
I would suggest you to check the note 1087090 first.
Further I would like to recommend you to deactivate the exit EXIT_SAPLMLSK_001 in case it is active in
your system.
If the note 1087090 doesn't apply, please check the services data in the tables ESKL and ESLL. If PO services data have been deleted in the corresponding PO item, please check all of the deletion indicators in ESKL and ESLL. There must be an inconsistency. For example: the field 'LOEKZ' has been set in the table ESKL for the PO item, but it does not reflect in the table ESLL.
In table ESLL, there is no logical or physical deletion but the
services in the table ESKL has been marked (i.e logically deleted) -> this could be the reason for the error message SE508. For this case please open a SAP ticket to get help with the correction of the inconsistency.
Regards,
Edit

Similar Messages

Validity period error while creating Service Entry Sheet.

Hi SAP experts,
Users are facing below two error messages while creating serivce entry sheet with respect to Standard PO (NB).The PO has RFQ refrence where Validity start and end date is blank. Also PO has Item category 'D' (Services)
1) "Runtime of entry must fall within Run time of the PO (05.12.2008-05.01.2009)
2) Entry must be wihin validity period of purchase order (05.12.2008-05.01.2009)
In the EKKO table system is showing validity start and end date for PO but it is not present in the PO (NB) by ME 22 / 23N.
Basically standard PO (NB) should not have validity start date and end date but still it is showing in the table EKKO.
Kindly provide me related resolution ASAP.
Thanks
BR,
Rahul

Hi Alex,
Thanks for the quick reply.
There is no Validity period maintained in the PO header under "Additional data".
but still I am getting Validity data in the table EKKO for standard PO (NB).
BR,
Rahul

Error: while creating Service Entry Sheet - for HELD PO

Hi experts,
While PO XXXXXXXXXX is in the status of Hold. System allowed me to create & delete a service entry sheet(SES) on particular date.
Another day i tried to create SES for the same PO. System is not allowing me to create SES and it gives me error as 'Purchase order XXXXXXXXXX incomplete (parked)'.
While debugging I found that ekko-memory field set to 'X'. At this point I am getting error.
My question is why the system is allowed me to create SES for a PO which is in HELD status?.
Please help me.
Thanks In advance,
Vinod

Thanks for the reply.
We are aware that system will not allow to create Service entry sheet for held po. But it is allowed me to create on a particular date. Another day i tried to create/delete a SES for the same PO or new PO(held status) system is not allowing me to delete/create SES.
Please help me what might be the reason which allowed me on a particulare date.
Thanks in Advance,
Vinod....

Error while creating service entry sheet

Hi Experts,
I am trying to create service entry sheets using bapi 'BAPI_ENTRYSHEET_CREATE' for a purchase order with multiple line items. The bapi creates SES for the first line item but gives error 'User xxxxxx already processing purchase order nnnnnnnnnn' for the rest of all. Tried using 'COMMIT AND WAIT' after bapi call but it's not working.
Kindly help me out with the solution.
Regards,
B.Siddhesh

Hi Siddhesh,
Please use below code before calling the 'BAPI_ENTRYSHEET_CREATE' to unlock the PO.
Hope this is helpful.
**Delete the Lock objects EKKO Header PO.
     CALL FUNCTION 'ENQUEUE_READ'
       EXPORTING
         GNAME = 'EKKO'
         GARG   = ''
         GUNAME = SY-UNAME
       TABLES
         ENQ    = ENQ
       EXCEPTIONS
         OTHERS = 0.
     IF NOT ENQ IS INITIAL.
       DESCRIBE TABLE ENQ LINES SY-TFILL.
       CHECK SY-TFILL > 0.
       CALL FUNCTION 'ENQUE_DELETE'
         EXPORTING
           SUPPRESS_SYSLOG_ENTRY = 'X'
         IMPORTING
           SUBRC                 = RC
         TABLES
           ENQ                   = ENQ.
     ENDIF.
**Delete the Lock objects EKPO Header PO.
     CALL FUNCTION 'ENQUEUE_READ'
       EXPORTING
         GNAME = 'EKPO'
         GARG   = ''
         GUNAME = SY-UNAME
       TABLES
         ENQ    = ENQ
       EXCEPTIONS
         OTHERS = 0.
     IF NOT ENQ IS INITIAL.
       DESCRIBE TABLE ENQ LINES SY-TFILL.
       CHECK SY-TFILL > 0.
       CALL FUNCTION 'ENQUE_DELETE'
         EXPORTING
           SUPPRESS_SYSLOG_ENTRY = 'X'
         IMPORTING
           SUBRC                 = RC
         TABLES
           ENQ                   = ENQ.
     ENDIF.
Reward if helpful.
Regards,
Shakeel Ahmed

Exit while releaseing Service Entry Sheet ML81N or event

Hi,
Any exits/ events while releasing a Service Entry sheet?
Thanks,
Krishna.

hi,
Check the User Exits for ML81N
Exit Name           Description
INTERFAC            Interface for data transfer
SRVDET              User screen on tab strip of service detail screen
SRVEDIT             Service list control (maintenance/display)
SRVENTRY            Unplanned part of entry sheet (obsolete since Rel. 3.1G)
SRVESI              Data conversion entry sheet interface
SRVESKN             Set account assignment in service line
SRVESLL             Service line checks
SRVESSR             Set entry sheet header data
SRVEUSCR            User screen on entry sheet tabstrip
SRVKNTTP            Setting the account assgnmt category when reading in, if "U"
SRVLIMIT            Limit check
SRVMAIL1            Processing of mail before generation of sheet
SRVMSTLV            Conversion of data during importing of standard service cat.
SRVPOWEB            Purchase order for service entry in Web
SRVQUOT             Service export/import for inquiry/quotations
SRVREL              Changes to comm. structure for release of entry sheet
SRVSEL              Service selection from non-SAP systems
SRV_FRM             SRV: Formula calculation (obsolete since 4.0A!)

Create Service entry sheet based on % work completion

Dear Experts
Is it possible to enter the percentage for planned services, while creating service entry sheet.??
For example:
My client requirement is like that, while creation service PO, there a planned service like 1 lot - 10,000RS.
while creatiog service entry sheet, they need to keyin like 34.567%, so it possible to keyin as 34.567% while creating service entry sheet. if so please advice me the steps..is there any confiq to be done?
Please advice me..
Regards
Saravanan

Really appreciate your response!
They want percentage enter with min 3 decimal points like 34.567%, its one of most important requirements, bez the 3rd digits of percentage,...will shows big fluction in VALUE. say around like millions.
Thats what they want to be implemented.
While creating service entry sheet, instead of Quantity field, is it possible to bring the Percentage field in SES?
There is one control data in condition table, where we can assign percentage, but i dont know the confiq...i dont know is this the correct place or not...even after change to percentage..whether it will allows 3 digit decimal or not..that one more question?
Regards
Saravanan

Regarding pricing not picking from contract while creating service entry

hello,
we are facing a problem -we have created a contract with a service item and made a purchase order with the same reference as well. problem starts while creating service entry sheet while adopting the services its not picking the rate from the contract. please guide us how to proceed further.
thanks,
ritesh

Hi Ritesh,
please check the pricing date in the contract service item and also in the entry sheet header. The price could be probably not found due to different validity of the pricing condition in contract - the price from the contract is not valid on pricing date of   the service entry sheet.
The price in SES is determined on the base of the value in the
field 'Price Reference Date of Entry Sheet' (ESSR-LBLDT). This field
is located on 'Basic data' tab.
However, enhancement SRVESSR (customer exit EXIT_SAPLMLSR_010) can
be used for changing this behaviour.
Regards,
Edit

User ID restriction for Project/WBS to create service entry sheet

Dear All,
My client requirement is that the user id should be restrict for particular project or WBS to create service entry sheet(ML81N). Can we do it in this manner?
Further i want to give you my organization structure as given below.
1. Project :- 20
2. Plant :- Single
3. Bus. Area:- 2
4. Co area :- Single.
Thanx,
Vishal Kr. Sharma

Standard restriction is possible for this T code based on document type,purchasing group,purchasing org and plant.
Others being ruled out I think solution is to restirct using purchasing group which is smaller entity.
Regards
Sreenivas

Error "Account Coding allocation" SE 508 while creating Service Entry

Hi SAP Gurus,
I am facing problem while creating Service entry as "Error in Account coding allocation"
As for the particular PO , SE is partially created and accepted, also MIRO entry is also done.
After that PO was deleted accidentally and again undeleted.
So when Analysed , found that ESKL table is updated with deletion indicator.
Path in PO Service tab>Account assignment>Change Display-->deletion flag is set, which is in display mode and cannot be changed.
As the whole cycle is completed for partial quantity the system is not allowing to change the deletion flag as per teh path above.
Also the notes 1087090 is applied.
Spoken with the abaper also as the note which is indicating the Exit "EXIT_SAPLMLSK_001" is also not active in our case.
Waiting for the reply ASAP.
Thanks & Regards.
Anil Singh Thakur

Hi,
Check the below link to resolve your issue.
Error in account coding allocation Message no. SE508 in creation of SES
Umakanth R

Error while saving service entry sheet

Hi Gurus
I m getting the following error while saving service entry sheet
Account determination for entry MGCA WRX not possible
Req. for help
Eldee

Hi,
Use T.code:OMWB,
Enter Chart of Account,Now you will have new screen,
Click WRX, sys will take to new screen
Click Rules,select check box of debit and credit only and save.
Now enter you G/L accounts(GR/IR) in debit and credit field and save.
Now try your transaction.
If helpful to you then reward.
Regards,
Biju K

User-Exit / Badi for ML81n (create service entry sheet)

Dear experts,
I am looking for a User-Exit / Badi for ML81n (create service entry sheet), which will enable me to compare its date with the referenced PO's item's delivery-date, befor saving , and send an error message (with no update) if the check is not OK.
Remark : I have tried MB_DOCUMENT_BADI but with no success because you can't send an error message from it.
Thank you
Yaacov

hi check below thread
User-Exit for Service Entry Sheet via ML81N?
regards
vijay

Problem in Creating Service Entry Sheet

Hi,
We have a Service PO. When we are creating Service Entry Sheet for it, showing error msg -
"Goods receipt for purch. order" is not allowed (ORD 10000722)
What should be issue...

Hi,
I am very sure that PO is created with the account assignment -F (Internal Order) , So provided IO number in PO under account assigment tab is already locked by your accounts/commercial team.
Please check if the Interal Order is blocked ,you need to activate IO again from KO02 or either change your IO accordingly.
Hope this will resolve your issue.
Thanks & Regards,
Sandesh Sawant

Creating Service Entry Sheet without using Service Master/Service lines

We are invoking the BAPI_EntrySheet_Create to create the service entry sheet. We are currently facing this issue...
1) For assigned PO's, we are getting the PO item and Account assignment information from BAPI_PO_GetDetail. We are using these values to populate the parameters/tables to invoke BAPI_EntrySheet_Create. For population the Entrysheetservices table, we are not using information from Service Master/Service lines but use the information we get from an external system to populate the Service lines(ESLL). We do not provide a Package No/Service information when invoking the BAPI but populate the service lines with short text, quantity, Gross price etc without service information like package no, outline indicator etc. The BAPI creates a service enty sheet successfully(this is without the SES Acceptance indicator not being set) but when we lookup the SES# from ML81n transaction the ESLL details lines are not displayed.
When displaying the SES using transaction ML81N, the header information is displayed correctly but the lines are not displayed. The Header information is correctly populated in ESSR table and detail is also populated in ESLL table. I think the cross reference information is correctly set in ESLH table to pull up the detail when ML81N as it is missing the package/sub pack information.
Your expert advise in resolving this issue is very much appreciate. Please advise.

Hi,
Creating Service entry sheet using bapi BAPI_ENTRYSHEET_CREATE
For creating service entry sheet follow below link and it helps to you.
http://wiki.sdn.sap.com/wiki/display/ABAP/CreatingServiceEntrySheetusing+BAPI
Regards,
Sekhar

*Unable to create Service Entry Sheet.*

Hi,
Iu2019m trying to create service entry sheet for a service PO but all the item level fields in ML81N screen are appearing in display mode (non-editable) also I cannot see the u201CService Selectionu201D button. So Iu2019m unable to insert/select the service detail and cannot create the entry sheet. If I use the menu path Edit->Service Selection, still cannot adopt services and system gets busy for a substantial period and eventually timed out.
Please helpu2026
Iu2019m using ECC 6.0
Thanks, Pratap

Service PO: Intangible good that is the subject of business activity and that can be performed internally or procured externally (outsourced).
-     Services are regarded as being consumed at the time of their performance. They cannot be stored or transported.
-     Examples of services include construction work, janitorial/cleaning services, and legal services.
Steps involved in Service PO:
1.     Define Organizational Status for Service Categories, in IMG - MM - External Services Management.
2.     Define Service Category, Enter Service Category, Org. Service Category, External Number Assignment
Without Validation, Acct. Category Reference & Service Category Description.
3.     Define Number Ranges for Service Category.
4.   Create Service Master Record (AC03), SAP Menu u2013 Logistics u2013 MM u2013 Service Master, Enter Service Category,
      Base unit of measure, Mat/srv.grp (007 u2013 Service), Division, Valuation class u2013 3200 & Service type.
5.     Create Service PO with Acct. Assignment u2013 Cost Center (K), Item Category u2013 D, Material Short Text, Mat. Group, Plant, Entry for Services in Item Level i.e. Service No., Quantity & Gross Price u2013 Save.
6.     Maintain Service Entry Sheet u2013 ML81N in SAP Menu u2013 Logistics u2013 MM choose PO in ML81N edit and save.
7.     Then do MIRO from PO reference u2013 Service Entry sheet.
8.     Collective Release of Service Entry Sheet u2013 ML85
Organizational Status for Service Category: The organization status indicates the areas in which service master records are used.
Service Category: The service category is the most important criterion for structuring service master records. It provides a default value for the valuation classes. Service master records can be assigned to number ranges on the basis of the service category.

Create service entry sheet against service PR

HI expert
Can we create service entry sheet against service PR?
If yes, can you show me the step in system?Thanks!
Regards
Mark

No you can not create Service entry sheet against service PR. The purpose of creating pr is just requestion for purchase of services or material. This is required for internal purpose even in pr ur not maintaining Vendor details, conditions. If you see standard business process with ref. to pr we creating po than service entry sheet. So in standard business process every documents have own purpose / value.

Error message SE508 while create Service Entry Sheet (ML81N)

Similar Messages

Maybe you are looking for