Error message: Sequence 1-FIN000000b9?

I keep getting this error message. What is it? And how can I get rid of it?
Error message: Sequence 1-FIN000000b9?

Its related to a render file. Its either lost or gone bad.
Probably best to trash your renders for the sequence and render again. Would that set you back to far?

Similar Messages

  • IP : Forecast function error. "Sequence %ADHOC does not exist"

    I have created a forecast function which would use Periods(08,09 & 10) to forecast periods 11 & 12. When I test the function using the Planning Wizard, I get an error message "Sequence %ADHOC does not exist" . Any inputs  ? I have put a debug breakpoint in the Class : CL_RSPLFC_FORECAST but the control is not even getting there. Thanks.

    Hi,
    did you try to create a planning sequence in the modeler, include you function there and test it in modeler?
    I had once a problem, that a function in planning modeler and wizard did not work, but it worked in the web template, so if it does not work in planning modeler, you might even try it in a web template.
    regards
    Cornelia

  • Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

    Hello all,
    I can't open a PP project without this error message appearing:
    "The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
    What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
    I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
    Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
    Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
    1. How to fix this?
    2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can  afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
    Other older PP projects of mine open and work fine.
    Premiere Pro CC 8.2.0
    Media Encoder CC 8.2.0.54
    OSX 10.10.2
    Any help would be greatly appreciated.
    Duncan.

    Adobe web chat come up with a solution.
    Open the PP project.
    Export your sequence or project as a Final Cut Pro XML file.
    Set up a new PP project.
    Import the Final Cut Pro XML file.
    This will get you back up an running.
    Since getting back to editing this project I have found that some things will be lost or change in using XML:
    You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
    You will keep cut points, crop fx.
    Not perfect but only took a couple of hours to save 3 days work.

  • Error Message While Running Sequence from Planning and/or SmartView

    Following error is thrown while running a sequence from either planning or smartview at a higher level.
    "*An error occurred while running the specified calc script. Check the log for details*"
    This is very weird because it does not happened with any of the following:
    1. Running same sequence from AAS at higher level
    2. Running at lower level entity either planning or smartview
    3. Running from Planning or smartview with split sequence at higher level
    4. Running each rule within the sequence from Planning or smartview
    What have we done?
    1. Checked every log file, Essbase, Planning, HBR - no error message is logged despite above statement.
    2. Recycled environment
    3. Stopped and restated DB and APP
    Other info:
    1. DB.log file is 1.2gb
    2. No meta data changes
    3. We could not able to replicate same in Q and Dev
    4. Looked at cache setting
    5. Sequence does not fail at the same place
    6. Recently updated calclockblockhigh to 15000 (restarted environment)
    Environment:
    Planning suite: 9.3.0.1 with 9.3.1 APS.
    We are going nuts and any feedback is greatly appreciated!
    Thanks!
    Edited by: venuramini on Jul 9, 2009 3:50 PM
    Added environment section.

    Hi,
    To start Planning as a foreground app, stop the Planning service and then go to Start - Programs - Hyperion Solutions - Hyperion Planning - Start Planning (Apache Tomcat).
    Thats if you are using Tomcat of course. A DOS window should then pop.
    What value did you enter for the HBR properties? Have you tried 960000 for both? Remember you need to restart the Planning services for changes to take effect.
    Have you tried increasing some of the properties in the HBRServer.properties under Hyperion\AnalyticAdministrationServices such as:
    HBR.timeout
    Try setting it to 30000
    The restart the AAS service for the changes to take effect.
    Hope this helps.
    Seb

  • HT201210 My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes
    Security software issues covered in: iTunes: Troubleshooting security software issues - http://support.apple.com/kb/TS3125

  • Cannot update.  Get error message 1648, "no valid sequence could be found for the set of patches."

    Cannot update.  Get error message 1648, "no valid sequence could be found for the set of patches."

    Uninstall the corrupt Reader version using http://labs.adobe.com/downloads/acrobatcleaner.html then download and install the latest Reader from http://get.adobe.com/reader/enterprise/

  • Error message when cutting a sequence into a sequence

    When we try to cut a sequence into another sequence, we either get a nested sequence (the nest tool is turned off) or we crash with this error message:
    We are in Premiere Pro 2014.2 with our media on a server.  I moved the entire project to  my local drive and tried it that way but had the exact same result.
    I switched the General Settings and changed the Mercury Playback Engine to software only.  It did not help.  I have no unlicensed plug ins and cleared my media cache.
    I've spoken to the Adobe help line (!argh!) but he was unable to fix the issue.  He did delete all of my settings I was starting at the defaults.  This did not help either.
    Has anyone any experience with the above error message?
    Thanks.

    Yes.
    I see now that I can paste into the layer I am copying from, but not into any other layer. If I lock my source layer, I can't paste at all.

  • In Premiere Elements 11 I get this error message, unable to access location sequence 01/for creating

    The total error message is: unable to access location sequence 01/for creating temporary burning files
    What is this and how do I fix it.

    Some of this may be for Premiere Pro, but the IDEAS are the same for all Adobe software
    I am on Windows, but have a few saved Mac discussions that may help (or, may not... but free to read)
    Mac and Root User http://forums.adobe.com/thread/879931 -and http://forums.adobe.com/thread/940869?tstart=0
    Troubleshooting guide for Mac freeze
    http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
    Mac 10.8.2 Bug w/PreElements http://forums.adobe.com/thread/1202216
    Mac FONTS w/PrElements-11 http://forums.adobe.com/thread/1201281
    External speakers stop playback http://forums.adobe.com/thread/1370072?tstart=0

  • Getting error message on iPad.     CSong:Sequence. Illegal block size

    Was working on a song and got booted out on my iPad. When I restarted garage band an error message came up
    CSong:Sequence-illegal block size. I have restarted my iPad and synced it. I have made several songs in the past with no problem.

    I dont know why this error appears but one use in another forum has had the same problem. After windows reinstallation everything was great.
    Well, Im not sure if the OS reinstallation on your notebook will solve the problems but you can try it.
    By the way: did you test several CDs. Many CD brands are not compatible with the drives and you should check if the same happens with different CD brands.

  • Error message when opening current project/sequence error?

    Hi!
    So I'm working with a project, a very simple timeline with vids transcoded to cineform codec. Everything is working beautiful. But every time I open the project to continue working on it, it shows me a strange error message that won't allow me to open my project. Is very stressful. I have to try many times until suddenly it opens the project. I always try to open it from all possible ways (double clicking on the project, from Premiere directly, etc) and is always the same issue. Until after many attempts it decides to open it. Does anyone know what's going on? This is the pop up message:
    Thanks so much for the help.
    Elaine.-

    Here is a link that talks about this error message. It may help you to find an answer
    Features and Sequence Presets missing | Adobe Premiere Pro CS6

  • Premiere Pro error message [/Scully64/shared/adobe/MediaCore/Backend/Make/Mac/../../Src/Sequence/Tra

    Hello,
    Does anyone have any ideas for a solution to the following Premiere Pro CS 5 error message? Any tips/ideas would be appreciated! Full error message below:
    Premiere Pro has encountered an error.
    [/Scully64/shared/adobe/MediaCore/Backend/Make/Mac/../../Src/Sequence/TrackItem.cpp-177]
    Error message occurs when editing/cutting out parts of footage to intergrate into a timeline sequence, when this error appears unable to continue using Premiere
    Footage contains MP4 and AAC (audio)
    using Premiere Pro CS5 v5.0.4, running on Mac OS X 10.9.1 (Marvericks) on Macbook pro (early 2011) with processor speed 2.7GHz (Core i7), 64-bit, 500 SATA, 4GB memory.

    1.  I did use PluralEyes to sync it, its a 3 camera shoot plus separate audio capture.  I am running the latest version of Plural Eyes 3.
    2.  as far as I know I'm up to date on everything, I am running an 3.4 GHz Intel Core i7 iMac with an AMD Radeon HD 6970M 2048 MB graphics card, with 10.9.2
    3.  It was triggered by a specific clip, which oddly enough was a clip that Plural Eyes didn't sync with the audio, I was able to trim the clip in the timeline, then it worked fine. 
    However, I just started a new project and I am having the same issue.
    4.  Tried the new sequence trick, didn't work
    5.  Tried this as well, no luck
    Seems like the only work around was to trim the clip, then I was able to do what I needed and had no other problems on that project, but like I said it has no reappeared on a new project.  For clarity sake it is different footage but shoot on the same camera, just on a different date

  • Persistent Premiere Pro CC 2014 error message: "This project contains a sequence that could not be opened..."

    I've been working on a project and everything was working fine. I close the program and reopened it an hour later. Now, I keep getting this error message: "This project contains a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
    I attempted to use one of the Adobe suggested solutions... opening a new project, clicking on the "Help" Tab and deactivating, but the tab doesn't have that option. I'm also a little afraid to uninstall and re-install premiere pro, the other suggestion, because I'm worried about losing my files.
    I would be grateful if anyone could help me.
    Thank you very much.

    Features and Sequence Presets missing | Adobe Premiere Pro CS6
    FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?
    What to do when you get a preview preset codec error in Adobe Premiere Pro CS6 | Val Gameiro, Writer, Director, Filmmake…
    if you try the project repair from Val's blog you will need to unzip the .prproj file to get access to the xml file.

  • Error message "one or more sequences cannot be opened"

    Premiere won't open a saved file - error message "one or more sequences cannot be opened" - no options given.
    This has happened several times, after Premiere crashes. Has anyone had this same problem, or know what to do about it?

    FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

  • Strange sequence of error messages during recovery

    Hi,
    I am trying to do an incomplete recovery as follows:
    "alter database recover automatic from 'C:\logsdir' using backup controlfile until change 2192315;"
    which results in the following error messages:
    ERROR at line 1:
    ORA-00279: change 2169480 generated at 10/22/2008 20:17:28 needed for thread 1
    ORA-00289: suggestion : C:\LOGSDIR\ARC00079_0668630851.001
    ORA-00280: change 2169480 for thread 1 is in sequence #79
    ORA-00278: log file 'C:\LOGSDIR\ARC00079_0668630851.001' no longer needed for this recovery
    ORA-00308: cannot open archived log 'C:\LOGSDIR\ARC00079_0668630851.001'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified."
    If 'C:\LOGSDIR\ARC00079_0668630851.001' is not needed for recovery, why is it being opened (as can be seen in the ORA-00308 error)? Any help is appreciated.
    Thanks,
    Raghu

    Check whether the Required Log file is exits or not, If exits whether accessible or not "\LOGSDIR\ARC00079_0668630851.001' ".
    Since oracle could not able to access/ open the file to proceed further.The file "C:\LOGSDIR\ARC00079_0668630851.001" does not exist but the point is that it is not needed for recovery if the message "ORA-00278: log file 'C:\LOGSDIR\ARC00079_0668630851.001' no longer needed for this recovery" is to be believed. I was wondering why it was being accessed if it is indeed not required for recovery.

  • Cannot open a sequence: "Operation not allowed" error message

    I had been editing a sequence in Final Cut Express HD (v.3.5.1) and then I went to "Render All" and it was most of the way through rendering when suddenly an error message popped up that said "Operation no allowed." I clicked "Okay" and then another error message came up that said "Error: Out of memory." Now I can't open the sequence, and I've lost a few hours of work. Every time I try to open the sequence, I get the same error messages.
    Does anyone know why this happened and if I can recover it?
    Using Final Cut Express HD 3.5.1.

    Does anyone know why this happened and if I can recover it?
    Sounds like you ran out of space on the hard drive fitting in the renders.
    One or more render files may be corrupt as a result.
    Try opening one of your Auto Save Vault files that pre-dates the upset.
    Al

Maybe you are looking for