Error message setup for CJ32 3 level WBS elements

Dear all
We have 2 requirement for my project system as followed Below
1.The original budget inputted in CJ30 should be the same as released budget on 1st and 2nd WBS level
(i.e. value in column BUDGET is the same as the value in column RELEASE on each 1st and m2nd WBS level in CJ32 ):
2. No budget is released on 3rd WBS level (there must be zero in CJ32
need to set up the error message when entering the budget release in CJ32.
Hence requesting all please let me know is there any standard process available for above required
if not is there any validation or ABAP development possible.
If any validation is possible please let me the possible scenario.
and let me know the disadvatages for settings of error message if any
Thanks and Regards,
Jyothi Pasala.

Hi
If you can explain the Business Process behind such a request we can think about a solution?

Similar Messages

Error Individual check for creating the object WBS Element required

Hi Expert,
I've a requirement to create WBS elements using BAPI. And I am using BAPIs in the following manner.
CALL FUNCTION 'BAPI_PS_INITIALIZATION'
CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI'
EXPORTING
i_project_definition = g_pdwbs
TABLES
it_wbs_element = it_wbs_element
et_return = it_return
EXTENSIONIN =
EXTENSIONOUT =
CALL FUNCTION 'BAPI_PS_PRECOMMIT'
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
When I do so I am getting the below errors. Please suggest.
"Individual check for creating the object WBS Element C-497082 required ".
"Individual check for creating the object WBS Element C-497082-0001 required".
Please suggest how to correct this error.

Hi Karthikeya,
I think the project profile which you are using has a different mask and the WBS element you are passing is different to the BAPI.
Are you able to create manually from CJ01 using the same WBS element?
Create a project manually and it will give the list of the mandatory fields set in the config. Using that list populate the BAPI struture accordingly.
Hope this helps.
Thanks
Lakshman.

CJ9B - error message when copy locked project or wbs element

Dear Expert,
Tcode CJ9B is for copy planning wbs element/project and every month i need to unblocked all the project or wbs that not use (locked) one by one to make CJ9B able to run without any error.
Is there any way to do mass change on wbs element or project as i unblock one by one in tcode CJ02?
Please advice what is different between CJ9B and CJ9F? Is it same doing copy planning wbs or project?
regards,
ng chong chuan

For the locking and unlocking you can use CJ20n -->WBS element overview instead of the CJ02 so, you can make mass locking and unlocking of WBS all the WBS elements of project atleast.
CNMASS tcode is for the mass changes in PS but same will not work for hte system status change.
One workaround is that you write BDC via SHDB txn and user that BDC to change the status of all the WBS for which you wanted to lock/ unlock .
You can also use LSMW also.
Regards
Nitin

Error: Maintain settlement rule of the sender for a higher level WBS

Hi,
I dont want to maintain the settlement rule for a higher level WBS. How can i configure this in such a way that i dont get the following error:" Maintain settlement rule of the sender" while doing CJ88. Maintaing a separate Settlement profile for a higher level WBS is an option but we are looking if something else could be done The problem is that there are no actuals booked against, say, level 2 WBS but when i execute CJ88, i get the aforesaid error. How can i ensure that only the lowest level WBS ask for the settlement rule and not the levels above it. I have already removed the Investment profile from the higher level WBS but still getting the same error.
Regards,
DPil

Hi,
It is a type Capex WBS and Biling element is not checked. In fact i get a warning while doing the settlement: WBS is neither a billing element nor an account assignment element.
Diagnosis
WBS element is not indicated as either an account assignment element or as a billing element in the master record.
System Response
The WBS element cannot be assigned to an account.
Procedure
Correct your entries or add the missing indicator to the master record for the WBS element.
But this is just a warning. On pressing enter i get the error :Maintain settlement rule of the sender "

I am trying to install current Firefox 3.6, as I am currently running an older Firefox on my Windows ME, but I keep getting this error message: "Setup has caused an error in SETUP.EXE Setup will now close."--Please help?

I have downloaded all IP changer Privacy software I have purchased and am trying to install it, and although it is made to work with WindowsME that I am currently using on my computer, it now says it requires Firefox 3 or above to be able to install the software. Therefore, I am trying to update my Firefox to current 3.6 but once Firefox 3.6 downloads it doesn't install. Instead I just keep getting the same error message: Setup has caused an error in SETUP.EXE. Set up will now close. Several times, I have also tried restarting the computer as the error message also recommended But I just still keep getting the same error message when I try to update/install Firefox 3.5. Please help/advise on how I can fix this problem. Many thanks in advance!

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can get it from here, but you are better off using K-Meleon (derived from Firefox) or Opera instead an old version of Firefox:
[ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz. 3.5 and later supposedly doesn't work.
http://sourceforge.net/projects/kernelex/

Can't get my desktop PC Win7 MS Ofc 2010 calendar, contacts, tasks onto iCloud. Get error message: Setup cannot start because of unexpected error". Laptop Win8

I have a desktop PC Win7 with MS Ofc 2010. I have iCloud on Macbook, Laptop Win 8 with MS Ofc 2013, iPhone synched. I cannot get iCloud to accept the Outlook, Calendar, Contacts, Tasks with checking the box and starting the upload.
Error Message: Setup cannot be started because of an unexpected error. Should I delete iCloud and reload and try again? What are suggestions from the community? Sent report to iCloud.

Hi Clifford,
Take a look at the article below, it provides tips that should help you resolve the iCloud setup issue.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
Symptoms
After installing or upgrading to iCloud Control Panel 3.0, iCloud setup cannot complete.
Resolution
You may see one of several messages. Your troubleshooting steps will differ depending upon the message:
“Your setup couldn't start because your username or password is incorrect. Go to the iCloud Control Panel, sign out, and sign back in.”
Click Cancel to close the message.
Click "Sign out" on the iCloud Control Panel.
Reenter your Apple ID and password, then click Sign in.
“Your setup couldn't be started because the iCloud server stopped responding.”
or “Your setup couldn't be started because the iCloud server couldn't be reached.”
Check the System Status page to make sure there aren't any issues affecting the settings you've chosen in iCloud Control Panel. If you are setting up iCloud for use with Outlook, check that there aren't any issues with Mail, Contacts, Calendars, or Reminders.
Make sure your computer is online. In a browser, attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud contacts, calendars and tasks cannot be added to Outlook. If you're using Windows 8, review the instructions for resolving network problems. If you're using Windows 7, review the instructions for troubleshooting internet connection issues.
“Your setup couldn't be started because of an unexpected error.”
Apple is investigating this issue. This article will be updated as more information becomes available.
-Jason

Windows error message "Setup could not read the CD you inserted..."

I partitioned my Macbook HD using bootcamp assistant and allowed 32GB for the partition. Then I tried installing windows using the assistant. I only get as far as verifying the windows CD (not far as which file system to use FAT32 or NTFS). Then I receive the error message, "Setup could not read the CD you inserted, or the CD is not a vaild windows CD." I am using the Windows XP Service Pack 2 version - not an upgrade. Also I tried booting up straight to the CD but that did not help either. Any suggestions?

Please disregard my question. Although my Windows XP Pro documentation and folder did not say upgrade I just looked at the CD for the tenth time and just saw Upgrade printed on the CD. I'm not making excuses but the holographic images make the CD a little hard to read. Sorry for the trouble. I guess I will be going out and buying the full version now.

TS3999 I am receiving an error message "setup can't continue because outlook isn't configured to have a default profile" I have checked all defaults are on in outlook. Please help, can't sync my calenders or contacts, but the email works fine in outlook.

Can't get my Icloud to connect to outlook. Error message - setup can't continue because outlook isn't configured to have a default profile. Help! Can't sync my contacts or calender with my other devices. Email works fine. Steve

I've looked at the Microsoft support info and it doesn't reveal anything new. I looked up the eM Client software and have decided to give it a try. I've been using Thunderbird and Gmail for years, but the issue of keeping contacts in snyc accross platforms led me to try Outlook as supposedly compatable with iCloud. Thanks for eM Client tip. It seems to work well and I'll be testing it for the next few weeks. While I'd still like to be able to solve the issue with Outlook (I'm not used to being defeated by software), I've got plenty of other things to keep me busy and a working solution is the priority here.
Thanks for the tip!

My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

Hi all,
Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
Anyway,
I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
Mine doesn't.
I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
I have had this phone for several years and it has never done this.
It worked absolutely fine, until I loaded the latest version of iTunes it seems...
Any suggestions?
Many thanks

ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5)

Fetch Top level WBS elements for delivery type LP

Hi everyone,
we are working on a delivery analysis report and we are in progress of fetching sales order number for deliveries with delivery type LP.
How we are doing?
so we are fetch the UP values from PRHI table for the wbs elements in LIPS.
Now we need to fetching the top level wbs elements from PRHI table by passing the UP values to the same table until the UP field value becomes initial.
Then fetching the corresponding sales orders from the VMPA table for the wbs elements from PRHI table for the value of corresponding UP field is initial.
So it is going through so many iteration to fetch the UP value again and again until it is initial.
What we need?
So if someone can suggest a FM or method to fetch the top level WBS element for the given WBS element from LIPS table will be of great help.

Hi,
Try FM
'BBP_PS_PROJECT_GET_LIST
'BAPI_PROJECT_GETINFO

On my HP printer Officejet4620 I get an error message "waiting for printer to become available". Help please?

On my HP printer Officejet4620 I get an error message "waiting for printer to become available". Help please?

Restart the computer and restart the printer. If you continue to have the problem the follow the steps Apple outlines in Reset Printing System feature article.

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

This worked...found on a prior discussion:
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page)...
http://majorgeeks.com/download.php?det=4459
From the link above (near the top of the page)....Under 'download locations' click on 'download@majorgeeks'
To install the utility, doubleclick the msicuu2.exe file you just downloaded and ran.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Restart your computer.
Re-download Itunes (latest version form Itunes website) and install. It worked!

Had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I rest

I had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I restarted the computer and tried again to run Photoshop and the same error message appeared. The message was followed by a message that stated that I needed to contact Adobe technical support and mention Error: 150.30. I need Adobe technical support to provide me a solution for my problem so I can continue using my Adobe products installed on my computer.

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.

Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

How to restrict from creating the Network for 1st & 2nd level WBS

Hi All,
In our project structure we have up to 5 levels of WBS, In some cases we have creates 3 level also . Now we want to restrict creates Network for first two level WBS , actually we want to restrict user to Create PR for those WBS so if we restrict them from creation of Network for 1st & 2nd level then they not able to create PR for same .
Thanks,
Virendra

Hi Virendra,
I can suggest you other way round solution.
If you are sure that those two WBS will not take any actual or commitment cost, then its better to NOT to mark those WBS elements as Account Assignment Element. I mean, if you do not set the indicator of Acct. Assignment Element (Untick Acct Assignment Element) on those WBS, then user will not be able to create Networks on those WBS Elements. Try this on your development or quality client and let me know if it works.
If it works, then you just need to disabled the Acct. Assignment Element indicator for those two WBS element and you can achieve that through substitution and field selection of WBS as well.
OR
Just look at OPSG settings at tab component. Just look if that can solve your purpose because your requirement is to stop PR from those WBS element. (I am just wondering if you can stop user from creating/change material components from those WBS-Networks)
OR
Go for User Status and set it to on those WBS Elements. Object Types will be Networks and Network Header.
OR
Try to achieve a validation or substitution where in you can mark Res./Pur. Req as 1 (Never) only for those two WBS elements. In this way user cannot create PR on those two WBS elements.
Regards,
Amit

Error message setup for CJ32 3 level WBS elements

Similar Messages

Maybe you are looking for