Error Message " SIM not supported by Carrier "

HI I am using the unlocked IPhone 4S from soft bank Japan with Straight talk SIM for 1year recently I was in INDIA and had to use another SIM now when I insert the SIM " I am getting the message " SIM doesn't support your carrier insert a SIMsupported by your carrier"any sug?

Your phone is not unlocked, and will work only with Softbank and their SIM card.  Softbank does not unlock iPhones for anyone. If it was "unlocked", it was done by hacking methods, which are removed whenever the phone is updated or restored.

Similar Messages

  • Using wall charger for first time I get error message "charging not supported by this accessory."  Been using since December and not seen this before.

    Using wall charger and am now getting error message "charging not supported by this accessory."  Have been using since December and this is first time I have encountered this.

    Did you look to see if there is debris or dust causing the problem? Get a flashlight and take a look to make sure.
    Is there something in the USB end of the cord perhaps?
    You didn't answer this question ....Are you using the charger and cord that came with your iPad?
    You could try changing cords if you have another one available to see if it is the cord. Have you tried connecting to your computer to see if you get the same message?
    You could try a hard reset by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, let go of the buttons and let the iPad restart. Then try the charger again.

  • On my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

    on my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

    Clean the iPhone charging port with a clean dry toothbrush.

  • Itunes won't open after downloading last update. Error message says "not supported by this type of Mac"

    Downloaded latest iTunes update. Now iTunes won't open, and the error message says "You can't open the application iTunes because it is not supported on this type of Mac." I have been using this MAc since 2008. Any suggestions appreciated.

    Welcome to Apple Support Communities
    It's a common problem that some users have after installing the most recent iTunes. Download and install again iTunes 11.0.3 to solve that problem > http://support.apple.com/kb/DL1614

  • ITunes purchased movies do not run on macbook pro retina display - Error message: HDCP not supported.

    Hello community,
    If i try to play a iTunes purchased movie on may Macbook Pro 15 Retina, a Error message comes up "HDCP not supported". I try to run it on the notebook screen, I have not plugged in any external device (monitor, beamer..).
    Full Error message in german:
    Der gewählte Film kann auf dem angeschlossenen Bildschirm nicht wiedergegeben werden.
    Dieser Film kann nur auf Bildschirmen wiedergegeben werden, die HDCP (High-bandwidth Digital Content Protection) unterstützen.
    Any ideas?

    I had this same problem.  What worked for me- not sure which one did it, but I went to System Preferences-Displays, and I turned off "Show mirroring options in the menu bar when available" and I also changed my resolution from "Best for retina display" to scaled "More Space".  The other scaling options seemed to do similar.

  • Error message url not supported by file

    When I'm on the internet, I randomly get an error message that reads 'url not supported by file:' What does this mean?
    Okay, just read other comments on this and I shut off my Time Machine for now - hopefully this works.  Thanks

    Depends on which browser and it's version you are using?  Solution may be found if you search in the "More Like This" section over in the right column. 
    Are you wireless or ethernet connected? 

  • MacOS10.5.8 error message Firefox not supported on this architecture????

    Quit Firefox with 4 open web pages and then tried to open it about 20 minutes later. Error message "You cannot open the application Firefox.app because it is not supported on this architecture.

    Firefox 4 and later versions aren't compatible with PPC, they are Intel only.<br />
    http://www.mozilla.com/en-US/firefox/4.0/system-requirements/
    For older Macs that aren't supported in Firefox 4.0 & 5.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
    http://www.floodgap.com/software/tenfourfox/ <br />
    http://code.google.com/p/tenfourfox/
    Or stick with Firefox 3.6. <br />
    http://www.mozilla.com/en-US/firefox/all-older.html

  • Photos that previously opened in adobe now wont.i  get the error message file not supported or is damaged

    Photos that ive previously saved and opened on numerous occasion will no longer open. i receive error message telling me that the file is not supported or has been damaged. Help.

    Hi cragside,
    Which Adobe application are you using, and what format are those photo files? I'd love to help, but need a bit more information to go on.
    I look forward to hearing back from you. When you reply, please let us know what Adobe application you're using (name and version), what types of files you're trying to open, and whether you're on Mac OS or Windows. It'll also be helpful to know whether any files open for you, or if the problem is specific to certain files.
    Best,
    Sara

  • E61 - MFE 2.0 - "Messaging: Feature not supported"...

    I have Nokia E61. I was using MFE 1.6.1 which was working great. I have upgraded to MFE 2.0. I am getting an error "Messaging: Feature Not Supported" while reply, fwd, creating new emails. I have tried to reinstall, full resync, reset the device and install again, but the error persists.
    Can someone help?

    I had that exact error- it was caused by installing an older version of MFE (1.x) that I had on my memory card, not the latest version (2.x).
    If you remove 1.x and reinstall 2.x it should work. I was confused because it synced everything OK, but I couldn't open emails!
    Cheers
    J

  • Message Format Not Supported - error message

    If I receive an MMS message when connected to my Mercedes SAP module I receive a "Not text" SMS message on the car system. When I disconnect from the car I have a txt message stored on my SIM that looks as if it should redirect me to the Orange website to collect my MMS.
    The problem is I have to copy the message to the phone memory to read it and when I try to read it I get the "Message Format Not Supported" error message.
    Does anyone know how to correct this I don't want to loose any MMS received whilst driving!!
    Message Edited by whitenemesis on 16-Mar-2008 02:10 PM

    Could be related to the reducing of supported types that I just noticed the following today posted on their blog:
    http://blog.share.ovi.com/twango/2009/10/you-have-spoken.html

  • When I try to run iTunes I receive the following error message: "Apple Application Support was not found.  Apple Application Support is required to run iTunes helper.  Please unistall iTunes, then install iTunes again". I have done this twice.  What now?

    When I try to run iTunes I receive the following error message: "Apple Application Support was not found.  Apple Application Support is required to run iTunes helper.  Please unistall iTunes, then install iTunes again". I have done this twice and continue to get the error message.  What now?

    Hi texasslagle,
    It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
    There is an article that you may want to use to try to complete your install here -
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/ts5376
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • HT1923 I can´t reinstall itunes. I updated and after downloading the latest version and installing it the error message: "apple aplication support was not found. it is required to run itunes. uninstall and install again. Error 2

    I bought an iphone 4s. After plugging it via usb to my computer itunes demanded to update version to 10.3 or higher. I uninstalled itunes, downloaded latest version (11.0.2) and during installation process on "activating services" it shows error message: "installation failed, verify administrator priviliges" which i have because i sign in as my pc administrator. I click on ignore and it tells me itunes has been succesfully instaled but when i try to run it it shows the error message: "apple application support was not found. It is required to run itunes. Uninstall and install itunes again. (which i have done several times) error 2 (windows error 2)." Someone please help me with this problem. Thanks.

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I have windows 7. I keep getting error message"apple application support not found". I have uninstalled and reinstalled i tunes multiple times but unable to get rid of error message. Can anyone offer a solution

    I have windowa 7 operating system. When I install I Tunes, I get an error message "Apple Application Support not found".
    I have uninstalled and reinstalled I Tunes multiple times with same error.
    Can anyone offer a solution?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • IPhone 5 unlocked for months, after firmware restore "SIM not supported error"

    I purchased a 16GB iPhone 5 a month after initial release from an authorized retialer in Austria, it was factory unlocked (at least I thought so) and has been working wonderful since purchase. I have used it in multiple countries and used many different SIMs. I tried doing a full restore on 6.1.4 and now I receive the "SIM not supported" errror. I tried many SIMs that have previously worked, but no luck. I did a search and according to IMEI.info, it is locked to the Austrian A1 carrier. It seems it went from being unlocked to locked during the restore and now it is pretty much bricked, as I can't get past the activation screen. Help please?

    There should be no original carrier as it was factory unlocked. If IMEI.info says its locked to A1, would that certainly be correct? The phone was never even used with them.

  • When downloading itunes software i get an error message:'apple apllication support not found"

    when downloading itunes software i get an error message:'apple application support not found'...error2 (windows error2)

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application, won't install normally.
    tt2

Maybe you are looking for

  • HT1212 how can i connect the iPad to the iTunes if the iPad is locked

    how can i connect the iPad to the iTunes if the iPad is locked

  • I forgot my apple id security question

    I forgot my apple id security question and i tried resetting it on My Apple ID website however when i went to "Password and Security" there was no choice to reset the questions, it only asked me the answer to my security question which i forgot. Solu

  • CD yes; DVD no

    I have a super drive in my G5 as well as one in a firewire enclosure. Lately they've both been jazzin-up on me and givn the circumstances I'm thinking it's a system thing. When I burn CDs--audio or data--no problems (I'm using Toast Titanium 7). But

  • Assets

    Is Asset accounting reconciliation to G/L only required when the legacy assets are loaded in sap during conversion? Or is it a year end process of reconciling assets to G/L (Assuming the Asset accounting is functional in SAP) Second question, what wi

  • Create master matrix form

    HI, IS IT POSSIBLE TO CREATE A MASTER FORM HAVING  A MATRIX LIKE PURCHASE ORDER WHERE  ITEM DETAILS CAN BE ENTERED ? AND WHEN I CREATE A MATRIX, ROW CAN'T BE SELECTED. I WROTE CODE AS FOLLOWS WHEN MATRIX DEFINED-------         '// Adding a Matrix ite