Error message "Solution not assigned to this user"

After creating the data source, I'm trying to create a report in SDK sandbox solution.
As I'm not a keyuser, it is going to the ByD center and asking for user id / password.
I even tried to assign WoC View also to a user.
When I tried with different user ids given to me by SAP, I'm getting the same error.
Let me know the steps to assign a solution in ByD center for report creation from ByD SDK
- Ravi ,

Hi Ravi,
as I already told Lynn, this will only be possible in a global solution.
The reason is the following:
You can create yourself multiple sandbox solution. So if you now to multiple changes with key user tools in the frontend for different sandbox solutions, in the end you won't know which change was made for which sandbox solution as these changes won't appear in your list of solution entitities in the ByDesign studio.
Therefore: Changes with the key user tools can only be made for the global solution.

Similar Messages

Using wall charger for first time I get error message "charging not supported by this accessory." Been using since December and not seen this before.

Using wall charger and am now getting error message "charging not supported by this accessory." Have been using since December and this is first time I have encountered this.

Did you look to see if there is debris or dust causing the problem? Get a flashlight and take a look to make sure.
Is there something in the USB end of the cord perhaps?
You didn't answer this question ....Are you using the charger and cord that came with your iPad?
You could try changing cords if you have another one available to see if it is the cord. Have you tried connecting to your computer to see if you get the same message?
You could try a hard reset by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, let go of the buttons and let the iPad restart. Then try the charger again.

LR 5 two installation. Dektop and Notebook. Notebook changed. LR 5 license deleted. New Notebook, new installation LR 5. Error Message, Key not valid at this status.

LR 5 two installation. Dektop and Notebook. Notebook changed. LR 5 license deleted. New Notebook, new installation LR 5. Error Message, Key not valid at this status. How can I do for the new installation.

Am 15.08.2014 14:03, schrieb dj_paige:
>
      LR 5 two installation. Dektop and Notebook. Notebook changed. LR
      5 license deleted. New Notebook, new installation LR 5. Error
      Message, Key not valid at this status.
created by dj_paige <https://forums.adobe.com/people/dj_paige> in
/Photoshop Lightroom/ - View the full discussion
<https://forums.adobe.com/message/6642924#6642924>

On my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

on my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

Clean the iPhone charging port with a clean dry toothbrush.

Itunes won't open after downloading last update. Error message says "not supported by this type of Mac"

Downloaded latest iTunes update. Now iTunes won't open, and the error message says "You can't open the application iTunes because it is not supported on this type of Mac." I have been using this MAc since 2008. Any suggestions appreciated.

Welcome to Apple Support Communities
It's a common problem that some users have after installing the most recent iTunes. Download and install again iTunes 11.0.3 to solve that problem > http://support.apple.com/kb/DL1614

Get Error message "Key not valid in this status" using Win 8 Pro.

Hello Community,
While I try to install the program i get the error message in the title.
I downloaded it with t-online Homepage-plan.
On both: Premiere Elements and Photoshop Elements 12.
I using a 64bit based PC.
Already tried:
Running in XP-Mode
Start as Administrator
Change installation destination
Thanks for your help, when you need further information just ask.
Greatings
Kelvin

For "Key not valid for use in specified state" errors try moving the folder RSA from
C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
tt2

Error message 'Could not save to path /Users/yogasail/Documents/' appeared and cannot save files?

I have an iMac 21.5 running OS X 10.9.4:Processor 2.7 GHz Intel Core i5:Memory 8 GB 1600 MHz DDR3. I have suddenly got this message every time I try to save a file -'Could not save to path /Users/yogasail/Documents/Emma/xxxx.rtf. Choose a different path.' Unable to save anything now?? Can anybody help?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

MacOS10.5.8 error message Firefox not supported on this architecture????

Quit Firefox with 4 open web pages and then tried to open it about 20 minutes later. Error message "You cannot open the application Firefox.app because it is not supported on this architecture.

Firefox 4 and later versions aren't compatible with PPC, they are Intel only.<br />
http://www.mozilla.com/en-US/firefox/4.0/system-requirements/
For older Macs that aren't supported in Firefox 4.0 & 5.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/ <br />
http://code.google.com/p/tenfourfox/
Or stick with Firefox 3.6. <br />
http://www.mozilla.com/en-US/firefox/all-older.html

Error Message:error message 25003001 not assigned to cc 3000

Hello All,
I am getting the above error message while posting in FB60. I used the cost center is 25003001 in company code 3000. Actually the cost center belongs to cocd 2500. Please let me know the reason. many thanks, Bob

Hi
You have answered your question already.
Change the assignment for cost center 25003001 in KS02 to company code 3000.

IPhoto upgrade/error message, solution not working. Can you help?

I have installed iLife 06. To upgrade my photo library I got the message:
"There is a problem accessing 1 or more files in your iPhoto Library folder. In FINDER I chose: GET INFO & changed all permissions to both READ & WRITE.
If this doesn't solve the problem you are then supposed to go to the UTILITIES folder. I did the following: 1. Opened the TERMINAL & 2. At the prompt typed
sudo chflags - R nouchg (this is followed with a space & using the "R" in upper case. 3. I am then prompted for a password & then in FINDER supposed to locate the iPhoto icon & drag that to the terminal.
ISSUE: I keep getting a message saying "permission denied".
HELP! WHAT can I do?
G4 Mac OS X (10.4.8) Processor: Dual 1GHz PowerpC G4 1MB L3 cache per processor. Memory: 1.75 GB DDR SDRAM

spysmart
I have no idea why the terminal commands didn't work, but then again, I'm no UNIX expert. But you can achieve the same thing by downloading BatchMod from
http://macchampion.com/arbysoft/
And apply it to the iPhoto Library Folder using the settings found here:
http://homepage.mac.com/toad.hall/.Pictures/Forum/BatChmod.png
(Credit to Old Toad for this one).
Regards
TD

Error Message to be restrict to specific user id.

Dear All,
The requirement of the client is that if Purchase Order is closed by ticking the Delivery Completion indicator for partially delivered purchase orders. If a end user tries to prepare the Goods Receipt in MIGO_GR for the closed purchase order, then the system should not allow him to prepare the gr and issue an error message "GR not possible for this purchase order:.
Hence i have activated the error message as follows :-
Version Appl. Area No. Message Text Cat.
00 M7 36 No goods receipt possible for purchase order & & E.
The message is getting flashed at MIGO_GR for closed purchase order.
The requirement is that i want to restrict that if possible at plant level or purchase group level or user id level.
Can any one suggest how can it be done.
Thanks in advance
AJ

Hi,
create new version fo message with Z*
then settings for user/user grp in SU01 and here set the user parameter as MSV and put parameter value as version.
Check let me know also.

3G. I keep getting an error message "Network not available".

3G. I keep getting an error message "Network not available". This is after turning data roaming ON, and even after turning phone off then back on, and having a 3G signal. Help!

I did ask my carrier - twice. I also went into the Apple Store (45 miiles away), who checked it and assured me no hardware issues.
I went back to the phone carrier - for the 3rd time. The assistant rolled her eyes and said this happens all the time. She changed the cellular data network settings on my phone from ideate to mobile. Problem solved!
Carrier has also now offered a refund for the time without coverage - but I had to ask about that, and resist their attempts to change me to a more expensive contract.
Hope this helps anyone else. Thanks razmmee209

Unable to charge my Ipad 4 with my Laptop (HP 7010tx) USB . I am Getting error message as "Not Charging" . Please give a solution for this ...???

Unable to charge my Ipad 4 with my Laptop (HP 7010tx) USB . I am Getting error message as "Not Charging" . Please give a solution for this ...???

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

Error message when opening a document "this document is being used by another user

error message when opening a document "this document is being used by another user, do you want to make a copy?
I select yes, then new message - word can not open this document.the document might be in use or it may not be an invalid document.
Any suggestions?

Hello MrNeuf,
I would recommend releasing and renewing the IP lease on the affected computer. The following article provides further information and details the process of doing so.
Mac OS: How to release and renew a DHCP lease
http://support.apple.com/kb/TS1920
Cheers,
Allen

Error message "Solution not assigned to this user"

Similar Messages

Maybe you are looking for