Error message - Specify either address number or address handle

Hi all,
When I tried to display an outbound delivery, there is a status message which says 'Specify either address number or address handle'.
Please let me know the reason for the above.
Thanks and regards,
Anishur

Hello Anishur
Today I have received the same error message while processing an inbound ORDERS IDoc. The error is due to the partner segments E1EDKA1 which contained:
PARVW     AG
ILNNR     SHOPS02020001
PARVW     WE
ILNNR     SHOPS02020001
When I changed the data in this segments as shown below it works:
PARVW     AG
LIFNR     SHOPS02020001
PARVW     WE
LIFNR     SHOPS02020001
Regards
  Uwe

Similar Messages

  • F.61 error "Specify either address number or address handle"

    Hi,
    I'm trying to trigger A/R correspondence with F.61 and am getting the error "_Specify either address number or address handle_" on some of our customers.  Some work, some don't - and I can't see what the difference is.  I'll get the error on an existing line item, but can create a new test document, and the correspondence is triggered with no problems.
    Can someone explain this error message?
    Thanks for your help!
    -Lori

    Check this thread and see whether it helps you.
    [Error message - Specify either address number or address handle   |Error message - Specify either address number or address handle;
    thanks
    G. Lakshmipathi

  • "E Specify either address number or address handle Error"

    getting following Error
    "E Specify either address number or address handle"
    while using BAPI
    "BAPI_SALESORDER_CREATEFROMDAT2"

    Hi,
    Check how you have filled the order_partners table.
    Regards,
    Bert

  • VF01 Error ...   Specify either address number or address handle

    HI All,
    I am trying to create Inter company invocie from a delivery and not able to save it .
    I am getting error in "Specify either address number or address handle".
    Please let me know what should I correct as i could not find anything wrong in Delivery .
    Regards
    Nidhi

    Hi Nidhi
    Please check the customer master record.In Customer master record,make sure that you have maintained proper address. Check in VBPA-ADRNR wheather the data is correct or different for bill to party
    Regards
    Srinath

  • Error : Specify either address number or address handle

    Hi guys
    I am unable to change & even display the SALES ORDERS (VA02 , VA03)
    I am getting error saying   * Specify either address number or address handle*
    Can you please explain Wats going Wrong
    Thanks & Regards

    Check this thread
    [Re: Specify either address number or address handle|Specify either address number or address handle(AM053);
    thanks
    G. Lakshmipathi

  • Specify either address number or address handle(AM53)?

    Hi to All,
    when i am doing sales postings by using standard IDOC (ORDERS) i am getting this error "Specify either address number or address handle(AM53)" .
    Why this type of errors is come.
    Is it xi issue or Functional issue.
    My scenario is file to idoc.
    How to solve this errors.
    Please help me
    Thank you to all.

    Hi Lalitha,
    Since the problem is happening during processing, there might be something missing in data part or maybe some custom logic issue (if implemented) in ECC.
    Another possibility, if PI missed to map Address fields in IDoc segments because of which this issue was encountered.
    Please verify these points.
    Also, I found similar problem in another thread.
    Specify either address number or address handle... | SCN
    Hope you have gone through it and then raised the concern here. In case you haven't, please go through the thread once and check the notes specified.
    Regards,
    Abhishek

  • "Specify either address number or address handle " BAPI_SALESORDER_CREATEFR

    Specify either address number or address handle when using following BAPI
    BAPI_SALESORDER_CREATEFROMDAT2
    1°) E AM 53:
    Specify either address number or address handle
    2°) W V1 555:
    The sales document is not yet complete: Edit data
    3°) E V4 219:
    Sales document was not changed
    does anyone have an idea about how to correct this ? Maybe a documentation about how to use version data in sales order ?
    Thanks for your help.

    Hi
    I am facing the same problem for BAPI. " 2°) W V1 555:
    The sales document is not yet complete: Edit data". Can you please tell me how you have corrected that error ?
    Thanks
    Joseph

  • Error message while syncing contacts with windows address book

    getting error message while syncing contacts from windows address book cradsstring something

    Hello,
    The complete and exact error message is always more helpful than some small snippet something. Please provide that, and maybe we can make some better guesses for you.
    Thanks and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server.  When I send to e-mail from another address, I get back an error saying the e-mail address is unknown.  My e-mail has worked fine for years until

    When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server.  When I send to e-mail from another address, I get back an error saying the e-mail address is unknown.  My e-mail has worked fine for years until yesterday.  HELP!

    The specific text of the error message is very important here — I'm not sure exactly you're encountering here.
    If you're able to connect to your email server and are able send email to other email addresses and if the failures are specific to one email recipient address, then please contact the intended recipient of the failing email, and confirm their address is valid.  (This is the way I'm reading your question.)
    If you are unable to send any email to any other email addresses and this is specific to your email address, then try the web mail client interface (if one is available) to verify your login user and password, and check with your email ISP for assistance.  If your email password works via web mail, follow this Apple troubleshooting guide, then — if everything else fails — I'd probably then entirely remove the email account from Mail.app and re-add it per your email ISP's particular setup requirements.  (Some issue with the setup or maybe a corrupt setting in OS X or a problem at the mail ISP servers is a common problem, but this effects attempts to send to all email addresses via that account.)
    An email account setup is specific to an email provider, unfortunately.   If you're using one of the more common email ISPs, then there are usually setup guides and frequently-asked questions posted online.

  • After my macbook was serviced, when I tried to open CS6, it prompted me to key in the serial number. After keying in, I got error message saying the serial number is invalid. However I have checked that it is correct.

    After my macbook was serviced, when I tried to open CS6, it prompted me to key in the serial number. After keying in, I got error message saying the serial number is invalid. However I have checked that it is correct.

    First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

  • Error Message - ORA-01722 Invalid Number

    Hello:
    I have the following situation. When I create an organization, a record is inserted into the following table, AGREEMENTS, and populates four fields.
    I have an update form which selects the organization from the AGREEMENTS table so the user can populate the rest of the table. In addition, on this form, there is a drop-down box which allows the user to select the name of a legal document along with the version of the document in which the user needs to select. This select list is created via an LOV joining three tables. The item name for this select list is :P6_DOCUMENT.
    The code for the LOV is:
    SELECT S.DOC_NAME||' - '|| O.VERSION_NO AS DOC, O.ORG_DOC_CURR_KEY
    FROM SUPPORTING_DOCS S,
         ORG_DOC_CURR_VER O,
         AGREEMENTS H
    WHERE
        S.DOC_TYPE = 'HISA'
    AND S.SUPPORTING_DOC_KEY = O.SUPPORTING_DOC_KEY
    AND H.ORG_KEY_LE = O.ORG_KEY
    AND O.ORG_KEY=:P6_ORG_KEY_LEWhen the user completes the form, the SUBMIT process is a PL/SQL block consisting of an UPDATE statement to update the AGREEMENTS table based on the selected organization and an INSERT statement to insert a record into the AGREEMENTS_DOC table to store the value stored in :P7_DOCUMENT.
    Ok, now here is where my problem starts.
    When I first bring up the form and I select the organization I want to update, I click the Search button to find the organization and I receive the following error message: ORA-01722 Invalid Number.
    At this point all I'm doing is a basic search. There is no insert/update or anything going on. I'm not understanding why I would be receiving this error message.
    The search is based on the database column ORG_KEY_LE whose datatype is NUMBER.
    In my application, the item assigned to ORG_KEY_LE is P6_ORG_KEY_LE.
    I have a PL/SQL block process created (On Load-Before Header) in the Page Rendering area of my page definition. The PL/SQL code that is written is:
    BEGIN
    IF :P6_SEARCH_ORG != '0' THEN
    :P6_ORG_KEY_LE := :P6_SEARCH_ORG;
    END IF;
    END;I then have an Item created, :P6_SEARCH_ORG, which is a Select List. In the LOV portion of the page for this item, I have the following:
    select ORG_KEY_LE display_value, ORG_KEY_LE return_value
    from AGREEMENTS
    order by 1The reason for using this table is because this table contains the newly created organization which needs to be updated with the remaining columns of data.
    I then have a Search button in the Button area which has the following settings:
    Button Position: Region Template Position #CHANGE#.
    Condition Type: Value of Item in Express 1 is NULL.
    Expression 1: :P6_ORG_KEY_LE.
    To troubleshoot this problem, I created two pages, one page to do the UPDATE and the second page to do the INSERT.
    The SEARCH functionality in both pages are identical.
    When I run my UPDATE page, which only involves updating the missing fields, the process works. I have my search box, I'm able to search for the organization, make my updates, and I'm good.
    When I run my INSERT page, which involves inserting the record with the assigned document, I receive the error message after I click the SEARCH button. In order to INSERT the record into this table, I first need to SELECT the organization that was UPDATED in the AGREEMENTS table (using the UPDATE page described in above paragraph). When I select the organization, the user can then assign the appropriate legal document to the organization and insert the record into the AGREEMENTS_DOC table.
    Can someone help me with this error message? I'm not sure why I am able to perform my SEARCH on a page with the UPDATE statement, not able to perform the SEARCH on the page with my INSERT statement, and not be able to perform the SEARCH on the page that combines the UPDATE and INSERT statements.
    I did some more troubleshooting and I do believe my SUBMIT process which contains the INSERT statement is the issue. I created a fourth page which doesn't have a SUBMIT process. I brought up the form, searched for my organization and the information for that organization appeared. The problem is definately with my UPDATE/INSERT process.
    The PL/SQL block for the Submit process is the following:
    BEGIN
    update
        MDD.HISA_AGREEMENTS
         set
           LAST_UPDATED_BY=V('APP_USER'),
           APPROVER_SALUTATION=:P6_APPROVER_SALUTATION,
           APPROVER_FIRST_NAME=:P6_APPROVER_FIRST_NAME,
           APPROVER_MIDDLE_INITIAL=:P6_APPROVER_MIDDLE_INITIAL,
           APPROVER_LAST_NAME=:P6_APPROVER_LAST_NAME,
           APPROVER_NAME_SUFFIX=:P6_APPROVER_NAME_SUFFIX,
           APPROVER_EMAIL_ADDR=:P6_APPROVER_EMAIL_ADDR,
           SPONSOR_EMAIL_ADDR=:P6_SPONSOR_EMAIL_ADDR,
           APPROVER_TITLE=:P6_APPROVER_TITLE
    where
          ORG_KEY_LE=:P6_ORG_KEY_LE
    INSERT INTO
        HISA_AGREEMENT_DOCS
          (HISA_AGREEMENT_DOC_KEY,
           ORG_KEY_LE,
           APPLICATION_KEY,
           STATUS,
           STATUS_DATE,
           CREATED_BY,
           ORG_DOC_CURR_KEY)
    VALUES
          (HISA_AGREEMENT_DOC_KEY_SEQ.NEXTVAL,
           :P6_ORG_KEY_LE,
           :P6_APPLICATION_KEY,
           'C',
           SYSDATE,
           V('APP_USER'),
           :P6_DOCUMENT)
    END;There is something wrong with the above statement and I do not understand what it could be. Can someone help?
    Thanks for the help.

    Hi,
    I believe you are on to something.
    The select list for item :P6_DOCUMENT appears when I first bring up the form. When I select my organization and receive the error message, I clicked on the Session in the Developer's bar. The value in item/field :P6_DOCUMENT shows %null%.
    This is the path in which my user would like to accomplish her task:
    1. Select an organization
    2. Display the information for that organization from the AGREEMENTS table
    3. Enter the data for the remaining fields in the AGREEMENTS table
    4. Select the document (:P6_DOCUMENT) from the drop-down.
    5. Click Submit
    6. Update the AGREEMENTS table with data entered in #3.
    7. Insert a record into the AGREEMENTS_DOC table with the selection from #4.
    Somehow I need the :P6_DOCUMENT field not to show the %null% during the SEARCH functionality. I think that is causing the problem.
    How do I fix this?

  • Error message "No internal transfer number found"

    Hi everyone,
    I'm trying to setup the self-billing- (ERS)-functionality for scheduling agreements.  The problem I'm currently facing is that I created a test-iDoc which while being processed causes an error.
    The test-iDoc is sent out with the basic type GSVERF03 (I just tried the same using type GSVERF01). On my customer's side the reception is configured to use the message type SBWAP.
    I also did the customizing-settings from within the ERS-monitor for the partner function (TCodes OVD5 & OVD7.... with reference number "E" & Delivery Note Number to Determine Sales Document), but in the end I still receive the error-message:"No internal transfer number found" even though it's available in the iDoc.
    Does anybody have any ideas on this?!?
    Any help greatly appreciated!
    Thx & regards,
    Bobby

    Hi Boban,
    I had same issue I solved   creating  number range in SNRO for object TRMNO_INT,
    Regards

  • Error Message (ORA-01722: invalid number) when add amount into Number field

    I am using VB.net, trying to insert data into a field called amt with Data Type 'Number'.
    my vb.net code is as follows
    Dim oradb As String = DatabaseConnectionString
    Dim AmountValue As Decimal = 123.45
    'get the connection
    Dim conn As New OracleConnection(oradb)
    'open the database connection
    conn.Open()
    'create oracle command
    Dim cmd As New OracleCommand("INSERT INTO TBL1 (AMT) VALUES (:AMT)", conn)
    cmd.CommandType = CommandType.Text
    cmd.Parameters.Add(":AMT", OracleDbType.Decimal, AmountValue, ParameterDirection.Input)
    'Execute
    cmd.ExecuteNonQuery()
    I got error message "ORA-01722: invalid number". Please help

    Did you also change the below line before inserting Integer 123:
    cmd.Parameters.Add(":AMT", OracleDbType.Decimal, AmountValue, ParameterDirection.Input)
    to
    cmd.Parameters.Add(":AMT", OracleDbType.Integer, AmountValue, ParameterDirection.Input)

  • I recently updated to iOS 8.0 on my Ipad however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this?

    Hi, I recently updated to iOS 8.0 on my Ipad mini however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this problem? Also i cannot download anything from the App store as a result of this.

    Can you check the Object Security for the Analysis Menu and Export button and see if it is restricted?
    Also, is this a Oracle DB?  IF so, has the following 32 bit Oracle Client components been isntalled:
    Oracle Objects for OLE
    Oracle Data Provider for .NET
    Oracle Providers for ASP.NET

  • Error message Indesign:Either the file does not exist, you do not have read access to it, or use the file in another application.

    I've got problem with opening a file in InDesign. The file type is an InDesign Markup Document. The error message is: Either the file does not exist, you do not have read access to it, or use the file in another application. What's wrong?

Maybe you are looking for