Error message starting InDesign CS6

Why do I get a message to install Swatches Panel Plugin when I start InDesign CS6 ?

I don't remember seeing this before...this is what it says...:Cannot load OutputMiscUI.InDesignPlugin because it requires Swatches Panel. Please install the Swatches Panel plug-in and restart InDesign.
And then, when I try to update CS6 (this is not CC, I own the suite), I get this...:
file:////private/var/folders/dk/dkSyOqSPF3qHzNOim5ddlk+++TQ/-Tmp-/TemporaryItems/FlashTmp0 .html[8/1/13 4:51:24 PM]
Dynamic Link Media Server CS6 1.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Flash Pro CS6 update 2
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe Photoshop 13.0.5
There was an error installing this update. Please quit and try again later. Error Code: U44M1I208
Adobe CSXS InfrastructureCS6
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Fireworks CS6 update to improve Mac 10.8 platform compatibility and resolve usability bugs.
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Photoshop Camera Raw 8.1(CS6)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe Bridge CS6 5.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe InDesign CS6 8.0.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Extension Manager 6.0.7 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe Illustrator CS6 Update (version 16.0.4)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Dreamweaver CS6 (to version 12.0.3) to address HiDPI-compliance and resolve critical bugs.
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
DPS Desktop Tools CS6 27.0.0 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe Media Encoder CS6 6.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216

Similar Messages

Please help me start InDesign CS6 from my computer!!!

I am new at this and I don't know how to start indesign cs6 from my computer.

Is the program correctly installed? It should start the same as any other application that is installed.
Or perhaps you are able to start ID and don't know how to create a document? Or is it crashing during startup?
Please give us complete details of what is happening, including your Operating System and the exact wording of any error messages you receive so that we can do more to help you.

Error message in Bridge CS6 -- how to fix?

I'm getting an error message in Bridge CS6.
I'm trying to create a Journal with Filmstrip with 42 items. The creation process stops after several photos -- 32 last time -- and I get an error messgae saying "Gallery creation stopped because of unknown error - sorry."
Any idea how to troubleshoot this?

While having very less experience with Web Gallery I used Bridge CC (same output module as CS6) to create one with 42 files in a journal with filmstrip without problems
The preview only is capable of showing 20 max but saving the file to my drive I had no problem viewing it in my browser with all 42 files.
I have a Mac with OSX 10.8 and Bridge CC
Can you provide more details about your set up?
Did it work before?
Are all the files able t pen and view in PS, are they not to big, what file type and size are you using?

Error message starting iTunes

Hi,
after moving the iTunes library on a new PC I get the following error message starting iTunes:
Because I use a german Windows version here is the error message in german:
"Es befindet sich kein Datenträger im Laufwerk. Legen Sie einen Datenträger in Laufwerk \Device\Harddisk7\DR7 ein."
I try this message in english:
"There is no disk in the drive. Insert a disk into drive \Device\Harddisk7\DR7" -> "Cancel", "Retry" or "Continue".
No matter what I click to open the media library and it seems everything to work. Music can be accessed device can be synct.
Has anyone any idea how I can fix this error?
Thank you and greetings from Germany
Marcus

I just started running into this error, too.
I'm running 8.2.1.6 on a Windows Vista Premium 64-bit OS. Plenty of speed, RAM, very fast capable machine.
I am running my iTunes library off of an external hard disk. Could that be the issue, it's just not ready fast enough when iTunes launches?
Just thought I'd post in case it helps answer the issue.
Thanks

Error message: adobe mediacore CS6 has stopped working --????

I am trying to run premiere elements 10 on a high=end pc with 8gb of memory, Win 7 Pro4-bit, massive hard drives and no conflicting software (that I can see....).
Can open up the program and use the manage module. It shows me three files that I have ready to work on. When I go to edit one of those files I get: 'adobe prem elem 10 has stopped working' and then 'adob media core CS6 has stopped working'. I can see from googling that other people have had this problme with no solution from Adobe yet. Any ideas? And no, running some defragmenter and system check thing on my PC is not in the cards. Don't need to buy any of those guys. Really.....

After an uninstall of InDesign and the antivirus software, no solution to the problem. I went into the startup menu and started doing selected start ups. I was able to narrow down the conflict to the "windows management instrumentation" program. When this is not running, I get the message that my ID has reached its activation limit and I need a new number or it needs to be deauthorized on at least one computer. There are a couple of other programs that need WMI to run as well. I did go in and delete the preferences since nothing I had was hard to recreate. Can the other files in the cache be deleted as well? Will ID look for them and recreate them such as the one in the recovery folder? Anyway, I had one document that I have been working on be rescaled-very strange. Everything else was unchanged. One other thing, when I would get the error message, I would close and then reopen the document without any problem. However, when I closed it again, even if all i did was view it without changing anything, I would get the prompt if I wanted to save the changes.
So does that help at all in narrowing down the problem? I have reinstalled the antivirus, and it did not affect anything. As long as I don't run WMI, I don't get the error message.
thanks,
Clark

I can't start INdesign CS6

A colleague of mine bought Indesign CS6, and he can't start the software.
We are part of the same domain, but he's a "normale employee" and I am part of our IT division. And it's policy with us that any software can only be installed with a user with admin priviliges.
When I install it with my admin user it all works fine. But when a normal user tries to open the software it shows the splash screen and then it just says that it has encountered a problem. There is no specific error message or error code.
When I go into Active Directory and I remove the logon script, we can also start up the software.
When I called Adobe they said I had to give admin priviliges to the user, but that is not what is supposed to happen. The software should just work for every user on the desktop/notebook it's installed on.
So I'm guessing it's probably something in the registry I should do. Anyone has any idea what?

We're seeing a number of similar reports. I can't run as a standard user on Windows 7, either (but since i'm the only user here, I run as admin anyway so I never noticed until the other day when someone else brought it up.
It's some sort of permissions issue, and I think you can work around it by telling the system to run ID as administrator and turning off UAC, but you shouldn't have to do that, and probably don't want to for a variety of valid reasons. Does your comapny have a support contract? I think this is something that needs to be handled by tech support, and probably a patch needs to be issued, but I don't know that it's a universal problem -- we don't have hundreds of complaints and I'm sure there are thousands of cases where it actually is working or we'd be inundated.

Error message Adobe InDesign has stopped working as soon as I open the application

I had a computer crash on Friday and I just reinstalled InDesign this weekend and it has worked fine. This afternoon I started to receive an error message that Adobe InDesign has stopped working and Windows will close the program and notify me if a solution is available. I've rebooted and closed every other program. I have also been downloading my lost files from Carbonite since yesterday and have paused the download. Do I need to uninstall the program and reinstall?

Use System Restore to go back before the crash.

Error message: Adobe InDesign CS5 has stopped working

Hi,
I am having a strange problem. When I open an InDesign file, I get the error message above. Then windows is looking for a solution. I close the window and reopen the file and it opens right up. This problem does not occur if I open InDesign first then open the file. Only when I try to open the file and InDesign starts to run. I am running Windows 7 64bit. Any ideas out there?

After an uninstall of InDesign and the antivirus software, no solution to the problem. I went into the startup menu and started doing selected start ups. I was able to narrow down the conflict to the "windows management instrumentation" program. When this is not running, I get the message that my ID has reached its activation limit and I need a new number or it needs to be deauthorized on at least one computer. There are a couple of other programs that need WMI to run as well. I did go in and delete the preferences since nothing I had was hard to recreate. Can the other files in the cache be deleted as well? Will ID look for them and recreate them such as the one in the recovery folder? Anyway, I had one document that I have been working on be rescaled-very strange. Everything else was unchanged. One other thing, when I would get the error message, I would close and then reopen the document without any problem. However, when I closed it again, even if all i did was view it without changing anything, I would get the prompt if I wanted to save the changes.
So does that help at all in narrowing down the problem? I have reinstalled the antivirus, and it did not affect anything. As long as I don't run WMI, I don't get the error message.
thanks,
Clark

"unable to acquire rendered frame" error message with AE CS6 Motion Tracker

Hi Everyone,
I am having issues with the built in tracking software in After Effects CS6. Everytime I hit "analyze" I receive the error message "unable to acquire rendered frame" or it simply remains at "0% (frame 1 of 70)". Sometimes I get the message "unable to obtain dynamiclink server connection". I've tried different types of footage, re-started, re-installed the software, deleted (emptied) the database and caches, started a fresh composition, and even did a fresh install of OSX but nothing works. Any ideas? I've searched a lot of forums on this and I've seen the problem in similiar situations (same error message with Warp Stabilizer analysis) but nobody seem to have found any resolution.
I'm running AfterEffects CS6 on Mac OS 10.8.
Processor 2.93 GHz Quad-Core Intel Xeon
Memory 8 GB 1066 MHz DDR3 ECC
Graphics ATI Radeon HD 4870 512 MB
Downloaded all the latest updates.
Done all the usual emptying of caches, repaired disk permissions, re-installation of software, etc.
Any help would be very much appreciated.
Thank you.

What firewall/antivirus software are you using?
After Effects communicates with the background camera tracker process using TCP, and some overly aggressive firewall/antivirus software can block this communication. That may be the problem in your case.
See this document for a closely related issue:
http://helpx.adobe.com/x-productkb/multi/startup-screen-hangs-premiere-after.html

Question: Error Code 4 InDesign CS6

How do I open an indesign CS6 file as a copy in attempts to retrieve the error code 4 message I am receiving? Right clicking does not give the option to open as a copy.

Adobe Indesign CS6 has issues, Adobe says not but only reaffirms with posts like this. We still have a problem here with Indesign and students opening files and getting an error code 4 or error code 5. Quit Indesign and open it again and the files are fine. If you keep trying opening and closing the files it eventually happens again with the error.
Like the lockfile gets corrupt and Indesign caches the problem or something. Not sure.
Here is a video I found showing the issue.
http://youtu.be/vYp2_QxM3wc
Here is my original posting with Adobe blaming us:
http://forums.adobe.com/thread/1168914

How can I resolve my R6025 error message in inDesign CC?

I am running inDesign CC 64 bit on a Windows 8.1 HP Pavilion desktop. For disclosure, I also have inDesign CC and inDesign CS6 installed. All versions of inDesign are installed via the Creative Cloud. I experienced the same issue before and after upgrading to the newest version.
While in the process of creating an ePub, I receive a Microsoft Visual C++ Runtime Library; Runtime Error! Program C:\... R6025 - pure virtual function call with the option to click OK. Then I see Adobe inDesign CC has stopped working.
I basically open my book, highlight the documents in it, Export book to ePub, choose a name that does not already exist, change the graphic to some other JPG file, set image size to Relative to Text Flow, image quality to Maximum, put in my ISBN for the unique identifier, and click OK. Then the error occurs.
I produced two eBook files for other books today. This issue only occurred when I took a book and documents that had been up converted from CS5.5 to the now previous version of CC. I haven't re-tried the ebook that actually worked to see whether it would work again.
The technotes in the Community relate to CS4, so I was learious as to applying the solutions mentioned within.

Pooja,
Thank you, but that is not necessary.
For disclosure, I uninstalled CS6 (I only installed it because it was compatible with the Amazon MOBI export tool), CC, and CC-64 bit. I then reinstalled inDesign CC. I then deleted the temp folders inDesign had created before when it attempted to produce the ePub files in earlier iterations.
I opened my problem book file, initiated the export, and used the default export settings. It worked! I inrementally customized the settings, running an export after each tweak, and it continued to work without issue. Finally, I applied all of my settings, and it worked.
Success!
Of course, one wonders why it worked. I will say that, prior to uninstalling inDesign, after an aborted attempt to export to ePub, when I would launch back into inDesign, an untitled.indd file would always be waiting for me, in addition to any files I had had open when attempting the export. I think it was this untitled document that was somehow clogging up the works.
Regardless of why, uninstalling and reinstalling inDesign CC resolved this issue.
Cheers!
Christopher

Error message starting Adobe Photoshop CC 2014

Dear,
After a first download of Adobe Photoshop (as part of the Creative Cloud) I get the below error message when starting the application. Any suggestions or ideas?
Windows 7 pc with full admin access rights and full rights to pass through the firewall.
Kind regards,
SF IT

Moving this discussion to the Photoshop General Discussion forum.

Error message when opening CS6 files in earlier versions

PSCS6 with 12.0.4 update. Mac OSX 10.8.2 16GB 1333 Mhz DDR3 543 GB Available
I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version). The message is:
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose flatten to load composite data as a flattened image.
Three options follow: Flatten Cancel Keep Layers
When 'keep layers' is selected the file opens as normal. However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should. Those on very early version of PS can also open the files without any issues.
I've been using CS6 since it was released and have had to delve through all my files and save them in CS5. Not every file is affected and I've been unable to find a common thread.
Hoping someone can throw some light on this.

This similar to the message one should get in an older version of photoshop such as photoshop 7.
If one presses ok instead of read composite that might preserve the layers with the original look.
But sometimes if a layer blending mode or some other feature is used an earlier versions of photoshop doesn't have, reading the composite is the only way to preserve the look of the image.
You said your using shape layers?
If they are shape layers you didn't use a stroke from the tool options bar?
Can you post an example of the image with the layers panel visible that you get that message with?
I guess your using photoshop cs6 with the 13.01 update?

Error when starting Dreamweaver CS6 w/Web Assist Data Bridge installed

When I start Dreamweaver CS6 I get messages that it can't find the following files in the Configuration/floaters directory.
The Files are:
WA_Memento.htm
WA_Site Tools.htm
WA_Site Tools_Progress.htm
Then it says "The Floater will not be shown."
How do I fix this?

Resetting your workspace in Dreamweaver should resolve this. Click Window > Workspace Layout and reset.
If you owned older extensions, then installed Data Bridge, Dreamweaver is probably just trying to find the floaters the old extensions used. Should be a quick fix if you reset!

Error message in Photoshop CS6 with text

I recently installed CS6 and since then I get an error message when I want to use text: "could not complete your request because something prevented the text engine from being initialized.
Restarting CS6 doesn't help...

PV-photo,
Have you installed any new fonts on your system recently? Through a little searching, a corrupt font seems to be the first warning light.
Also, see this help document about troubleshooting font issues. You may find a solution in the steps listed!
Cheers,
Michael

Error message starting InDesign CS6

Similar Messages

Maybe you are looking for