Error message states that I do not have enough hard disk room
I was loading some pictures onto my macbook and the photos did not load properly. I have around 4,200 current photos. There is 29 GB left on my hard drive. I can not see the last "event" of photos. Looking through preview I see some on my last photos and some are there but do not show up in iphoto. Now I am getting an error message that states I do not have enough disk space therefore the library is not saving. I am now locked out of downloading files from safari, or even itunes.
I am lost as to what to do next. please send me in the right direction. thank you!
tommyok wrote:
I was loading some pictures onto my macbook and the photos did not load properly. I have around 4,200 current photos. There is 29 GB left on my hard drive. I can not see the last "event" of photos. Looking through preview I see some on my last photos and some are there but do not show up in iphoto. Now I am getting an error message that states I do not have enough disk space therefore the library is not saving. I am now locked out of downloading files from safari, or even itunes.
I am lost as to what to do next. please send me in the right direction. thank you!
Welcome to the Apple forums:
Are you referring to the TimeMachine harddrive?
If you are referring to your internal drive, you may get more information in the Leopard Install and Setup forum:
http://discussions.apple.com/forum.jspa?forumID=1219
In general you need to have at the very minimum, 10% or your HD free. Your drive may be completely full, depending on how large it is, which you don't say. The amount of freespace on an HD varies as the system swaps files on and off of it.
Be sure you have everything backed up, just in case.
Similar Messages
-
i keep getting an error message saying "i do not have enough access privledges " when trying to sync i phone can anyone help me?
Hello ArtyJP,
You can give this a shot to correct the permissions on your computer. I know you have Windows 8, the Windows 7 will still get you in the right place.
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I tried to download the latest upgrade to iOS8 on my iPad. Message said that I did not have enough space. I bought 20 G more storage and it still will not download. How do I download iOS8. I am now running iOS 7.1.2.
You delete content from the iPad and/or update it from iTunes on a computer.
iCloud space is separate from that on the device.
(114762) -
problems started when firefox 3 auto updated to 4
when i booted up and tried double click on short cut it gave error message that i did not have access to file
I am running windows 7
shortcuts had gone to degraded state on screen
if i have to re-boot i have to re-download firefox
am now running firefox 5
when shutting down, the firefox shortcut icon flickers/shuddersSW,
I don't know what the problem is with your corrupt/unopenable document on CD. I wonder if you can display it with QuickLook.
Select the file in Finder and hit the Spacebar. If the file is displayed properly, you can capture it as an image with Grab.app or by Shift-Command-4, > drag capture box.
Not knowing the complexity of your document, it's difficult to say what you should do next. I'd submit the graphics to an OCR application and extract the text, to be used in reconstructing the original document.
Jerry -
Every time a new audio file is downloaded onto my desktop, (or if I double click on a new audio file) iTunes no-longer will play them. It gives an error message stating: Attempting to copy to the disk "Mackintosh" failed. You do not have enough access privileges for this operations.
Please can you help me to resolve this situaion. I confess that I am not very computer savvy.Launch iTunes on the computer.
From the iTunes menu bar click Store > Authorize This Computer
Make sure to sign in using the same Apple ID used on the iPhone.
Then sync your iPhone. -
I am trying to burn a dvd and it will not allow me to do this because it states I do not have enough space for encoding. how do i free up space and from where?
iDVD can only use your startup hard disk for the "scratch space" it needs for calculations during the encoding process. 25 GB is a good average requirement, but a large project (3 or 4 hours of content) might require more.
To free up space, you will have to move items to an external hard drive and/or delete items you no longer want.
Please note that iDVD can't use and external hard drive for this "scratch space". -
Why do I get a message, "You do not have enough access privileges for this operation"? This has not been a problem before.
Hello wdesertman,
Thank you for contacting Apple Support Communities.
This article explains what is going on and how to correct it:
support.apple.com/kb/TS1277
http://support.apple.com/kb/TS1277
Regards,
Jeff D. -
Does anyone know how to resolve this? please help.
AdrienneWe need some numbers. Connect the phone to your computer with a USB cable. Click on its name in iTunes.
Look at the bottom of the iTunes screen; there will be a graph of the memory usage of the phone. At the right end it will tell you how much free memory you have.
Now go to iPhoto. Select all of the images you want on the phone. iPhoto will tell you how much space is required.
Compare the 2 numbers, available vs total of the image sizes. -
I have treid to download a video and there is not enough space available but I cannot stop the download. How can I stop it please?
You can try Download Adobe CS5 Free Trials – All Direct Links without Akamai | ProDesignTools.
-
IPhoto quit in the midst of importing some photos to the library. When I reopened it, it had some events, that were imported a few days earlier, which had no photos. They were missing. I tried Time Machine to restore the iPhoto Library to a version made a couple of hours earlier. But I got an error message saying that I did not have permission. I tried restarting iPhoto while holding down the Option key and tried to access the Time Machine iPhoto Library, but that only got me a portion of the library and not the portion that was missing earlier. When I restarted iPhoto this time, even more of my photos were missing.
Try repairing the permissions on your Time Machine, Take a look at this link, http://support.apple.com/kb/HT1452
-
Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?
Forgive my ignorance but I have never hear of iTunes Document Manager Pro. If you mean Document Manager Pro, i was able to find that. Back to your problem, have you tried opening one of those files in the iOS iWorks apps? Form the quick read that I did about this, .cwk files can be opened by Pages, Numbers or Keynote, depending on what type of document that it is and those files can be read by Document Manager Pro, after properly saving them. I don't see that you can go directly from the .cwk file in Document Manager Pro without converting them first.
I took a very quick look at the app, so I may be a missing something about its capability. -
My ipod touch (model A1213) is not syncing properly. I have updated the software to the latest (2.2.1) and have even resored it. Itunes says it is working and updated but will not sync and apps. Error message says that app will not sync because a newer version needed.
2.2.1 is not the latest available for any ipod touch.
Is yours the original ipod touch?
If so then:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -
How do you export your movie using idvd? I keep getting error messages and notices that I do not have enough space to transfer to a dvd.
Can you give us the steps to re-create the problem, and the exact wording of the error message you are getting please.
-
I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable. The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning great. The network name I assigned to the TC is also not appearing among available networks. How do I remedy this, please?
What OS on the computer you are using to setup the TC?
Did you turn on ipv6 for wireless to link-local... this is essential for network access now??
Try power cycling the network.. start up in correct order.. uverse.. 2min wait.. TC.. 2min wait.. computer.
No luck factory reset and start over. Use ethernet cable as well to the computer to help it.
No luck I can show you manual method. -
I downloaded Firefox 4.o exe. When I tried to open it I got an error message stating that it was not a valid Win32 application. I am using windows XP SP3. How do I get it to open?
[[Firefox is already running but is not responding]] has steps that you can try. It sounds like you may have something that is hanging your browser on exit (probably an extension or a locked profile) and the steps on that page should help clear it up.
Maybe you are looking for
-
Cover flow slow after upgrade to iOS 5
my cover flow is really slow and sometime it's crash
-
IMac freezes after turning on. Nothing happens. What should I do?
My iMac is able to start up, but it suddenly freezes on the apple logo with a white background. It stays like this for hours and nothing still happens. It's able to be turned off however but other than that, nothing.
-
BW Infopackage calling FM multiple times
Hi Experts, I am trying to extract data from FM using datasource in RSO2, I have created infopackage in BW on this datasource now my problem is while executing infopackage (say I have 100 records in ECC) it is calling FM multiple times and getting mu
-
Netboot Error Code: Mac OS X Server 10.4
Hello, I have been working on a two-fold Netboot issue when trying to pull an image off of a 10.2.8 iMac and distribute it via Netboot from a 10.4 server. First off, image creation worked just fine. I copied the System Image tool from the server to m
-
My power cord keeps fraying, what is the fix?
I have taped it up and thought that would be the end of the problem, but now it is fraying beside the area I taped. What is up with this? I feel Apple should replace this cord on my two year old computer even though it is off warranty.