Error Message : System error in program SAPLRSDRH and form BUILD_VIEW-3-

Hi Experts,
An anyone encountered the error below and is aware of a note or how to correct it:
"System error in program SAPLRSDRH and form BUILD_VIEW-3-"
I got this error while trying to run a BEx query.
Thanks
Kingsley
Message was edited by:
Kingsley Nndem

Check this note 919870 if it helps..
https://websmp203.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=919870&_NLANG=E

Similar Messages

System error in program SAPLRSDRH and form BUILD_VIEW-3-

Hi.
I get the foll error when I execute a query:
System error in program SAPLRSDRH and form BUILD_VIEW-3-
This has started occuring since we upgraded our Oracle to 10g from 9.
Any ideas please?
Cheers
Anand

Thanks Lily.
I saw this note. But do you think this is applicable to me? I don't have any massive concurrent query usage situation. Currently I am the only user testing the queries in PRD after an Oracle upgrade. Do you think the upgrade has anything to with this issue?
Cheers
Anand

System error in program SAPLRSDRH and form CREATE_TABLE-3

Hi all,
plz solve this issue .
System error in program SAPLRSDRH and form CREATE_TABLE-3
Tx

Hi,
Try to regenerate the report in RSRT t.code.. (Generate report)

System error in program SAPLRRI2 and form FEMS_IN_FORMULA_GET-01 Message

Hi Gurus,
I am getting error 'system error in program SAPLRRI2 and form FEMS_IN_FORMULA_GET-01' while checking and executing a query.
The scenario is :
- The query is using Replacement path formula variables and when I do remove these the error disappears.
- I recreated the same formula variable but the error message reappears.
- We are separating systems (moving on to new system) and the query runs absolutely fine in the old system.
- The same variable is been used in some other queries as well but they run absolutely fine without any error.
Any suggestions what is going wrong ? Should I raise an OSS to SAP, thats going to be the final GO !!
I have tried almost doing all things but the error remains the same. This is quiet urgent and Reply will be much appreciated.
Best Regards
Ritesh

Hi,
Thanks for the reply. OSS note 982328 becomes irrelevant in my case as we are on SAP BW 7.3 and SP SAPKW73003. So this is the most recent and latest version of SAP.
One more update is I tried regenerating the query in RSRT/RSRT1 but it starts in debug mode. This is of more worry to me now. Any suggestions or solutions are welcome, meanwhile I will raise this to SAP.
Best Regards
Ritesh Singh

!!System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE

Hi Gurus,
Mater data text loading from a DSO to a InfoObject has failed in the process Chain at DTP step while trying to extract Data packet 2 from the DSO.
In the log i am getting following error message:
"System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Message no. BRAIN299".
Please help urgent.
FYI.....
we have recently done upgrade from BI/ABAP SP11 to SP15 and the latest Java SP || 14 (both included in SPS 14).
Points will surely be awarded.
Thanks,
Anurag

Hello Anurag,
Could you solve this problem? If so, please share the solution with me. I'm getting the same error while loading data using DTPs.
Regards,
Neha

Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 error

Hi All,
When I refresh a query/workbook getting following error message and can not proceed further..
Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01
We are using BW 3.5 and BEX reports.
I'd appreciate if you could help me on this

I don't know if you have since been able to resolve this problem.
Anyway, for future reference, I have just had the same error message and was able to resolve it by simply removing and then reinstalling one of the characteristics, together with its variables and filters, in the free characteristics section of the query.
Hope that this is of help to someone.

System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01

Hi All,
I'm configuring the integration between BW 7 SP 11 and Portal 7 SP11. I have problems in the IP functions.
The following error ocurrs in QueryDesigner when trying to execute a Query that is on an Agregation Level :
The initial exception that caused the request to fail, was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01- (see long text)
When I execute Querys that are on Infoproviders, everything is ok.
Any Idea??
Thnks a lot!!!
Yolanda.

Hi,
Are you getting an ST22 dump in the backend, we used to get this kind of error in case of hierarchies, please check 2 things
1. Agg level is active
2. Check the query (option is available on query designer)
thanks

System error in program SAPLRRI2 and form BEST_WGR_02-01-

Hi Friends,
When I am trying to execute a query i get the error message below.
System error in program SAPLRRI2 and form BEST_WGR_02-01- (see long text)
Error when generating dataProvider
The Same query can be executed after restarting BI server.( Hope No one recommends restarting BI server always).
I am using SAP BI Patch level 3.
Internet explorer 7
Gui 6.4
At the same time it is unable to disply variable screen in BEx Analyser with IE 7(Variable entry Screen appeares but No Input boxes are seen). Its Working fine with IE 6.
Any Solution For This.
Many Thanks,
Anand

Hi
IE 7 is not so compitable with BEx. It always has the Popups problem..
See the Note :919196 and Note 1159538 - Issues in Internet Explorer Note 950975 - SAP GUI for Windows: Support for IE7 (Internet Explorer 7)
Hope it helps

System error in program SAPLRRS2 and form SELOPT_ASSIGN-01-

Hi there
I get the error message
"System error in program SAPLRRS2 and form SELOPT_ASSIGN-01-"
when trying to run a web template from the portal. If I run it from WAD, it runs perfectly. If I then run the same template from the portal, with the same user, I get the above error message.
If I click on the message, I get further information, which says
"Portal Runtime Error
An exception occurred while processing a request for :
iView : com.sap.portal.contentfetching.BWTunnel
Component Name : com.sap.portal.contentfetching.BWTunnel"
Any ideas on what this can be?
I am able to run other templates as this user.
Cheers,
Andrew

Go to RSRT transaction and Generate the report (query) once again.
Hope it works.
Regards

System error in program CL_RSR and form GET_CHANMID-02-

System error in program CL_RSR and form GET_CHANMID-02- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
I got this error in SCM IDES 7.0, Planning Area Initialization and Display MPOS...Please help me...

Hi,
One of our planning sequence is failing in production with similar error. Could you please let us know what is the fix for the issue you faced.
System error in program CL_RSR and form GET_CHANM-01
Please advice as this is very critical.
Thanks,
Tintu

System error in program SAPLRRS2 and form SELOPT_ASSIGN-01- (SAP BW 3.5)

Hi,
The following error occured when executed a query :
"System error in program SAPLRRS2 and form SELOPT_ASSIGN-01-"
I have read OSS note 907533 but from what I see in this note, I conclude the repair instruction
only for SAP BI 7.0 so this note not for SAP BW 3.5.
I have use button "Check query" and everthing is fine.
Is there someone who can solve my problem?Thank you
Regards,
Satria

This question is interesting.
One of my users got the same message today. Wednesday, she ran some queries that had 3 variables on them. She had no problems. Yesterday, she tried to run the same queries, and one of the three variables did not show up on the variable screen. The characteristic in question is not authorization relevent. Others had no problems with these queries.
Today, I created a new query using the characteristic with no variables. It ran fine for her. I added the variable and she got the error message.
So, I would really appreciate an answer to this thread!
Ginny

Executing query error: System error in program SAPLRRI2 and form REP_A

Hello Experts,
I am facing problem while executing query.
I have activated a query from BI content. The query is activated successfully in development and running successfully in development, so I transported the same into QA.
When I execute this query into quality, automatically debuger opens. After I come out of debuger I get following error message:
" >> Row: 82 Inc: LRRMSU13 Prog: SAPLRRMS
System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text)
Error when generating dataProvider "
This query is using some standard structures, which are running successfully in other queries in QA.
what would be an issue?
Regards,
Nirav Shah

Hi,
Try to regenerate the query in RSRT t.code.
   ie) RSRT - give the query name - Generate report ( icon will be there near to Execute + debug) .
After generating the report, (logoff and login )try to execute the query again ..if the above solution doesn't work, check the below OSS notes which may help for you.
OSS notes : 1. 1121766
                   2. 1117966
                   3. 1225856
Regards,
Siva.

System error in program CL_RSR_CLIENT and form MENU_SEL_ITEM

Hi,
After a system copy (BWP to BWT) we encounter a problem with reports containing documents the BWT environment.
At first I thought it was a problem with the Java stack, but now I am not so sure anymore.
When running a report in RSRT (for example in BEx mode), we see the report details.
When we use the menu on the InfoObject which is containing the documents and than choose: goto - display documents we receive the error: "system error in program CL_RSR_CLIENT and form MENU_SEL_ITEM"
If I run the report in the WEB we also see the report, but now we receive the message:
Message: Error for query in BI system: JCO System name for alias BWP not found in portal
Stack trace: com.sapportals.wcm.repository.ResourceException: Error for query in BI system: JCO System name for alias BWP not found in portal
As you can see the error is pointing at the BWP instead of the BWT.
Can anyone help me solve this problem?
Regards,
Jos.

Thanks Martin
The template installer was the solution to our problem.
Points are awarded to you!
Regards,
Jos.

System error in program CL_RSR_HIERARCHY and form __LOAD_VALSIDS_

Hi,
I am using BW3.5 SP19 and I have a web dynpro application in another WAS 6.40 box that connects to the BW box using XMLA connector.
I am getting the following error when the web dynpro applications connects to the BW server. The error is
SOAP request failed with return message 2147483653 ( System error in program CL_RSR_HIERARCHY and form __LOAD_VALSIDS_1)
From the error, it looks that the ABAP program in the BW server is causing the problem.
Any help would be greatly appreciated.
Thanks.
Edited by: Mike Lee on Jan 17, 2008 3:03 AM

Hello RR,
I am facing the same problem could you please tell me how did you sloved this problem?
Thanks in advance.

System error in program CL_RSR and form GET_PROVID-02-

Hello.
I have these error messages when I try to display data from an ODS in my BI 70 system:
I>> Row: 73 Inc: LRRMSU13 Prog: SAPLRRMS
ASystem error in program CL_RSR and form GET_PROVID-02- (see long text)
Can do anybody help me?
Thank you,
Javier

Greetings Javier and others-
What Service Pack are you all on?
I believe that anything below BI 7-SP10 will require manual application of the following OSS Note:

973350 - $ symbol on behalf of an InfoProvider
hope this helps.
-Stefan

Error Message : System error in program SAPLRSDRH and form BUILD_VIEW-3-

Similar Messages

Maybe you are looking for