Error message "the application APPLICATION_NAME can't be opened. -10810"

All of a sudden I started getting the error message "the application APPLICATION_NAME can't be opened. -10810" whenever I attempt to open an application. Sometimes all of the applications will work, but then all of a sudden one or two applications will turn unresponsive and I will get the above message whenever I attempt to open any application. Does anyone know what this error might be, and how I might go about fixing it?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • Why do I get this message "The application finder can't be opened 10810

    My finder will not open and when I click on finder I get the message The application finder can't be opened 10810.

    click here for information.

  • Cant open Safari at all . This is the message : " the application "safari" can't  be opened . error -1712 . I have restarted the OS X several times . How can I fix it ?

    Cant open Safari at all . This is the message : " the application "safari" can't  be opened . error -1712 . I have restarted the OS X several times . How can I fix it ?

    Reboot and try again.

  • Hi,  I cannot access Finder and get the following message. Can anybody help? The application Finder can't be opened -10810

    Hi,
    In the last couple of days I have found that I can't shut down. When trying to open Finder I get the following message... The application Finder can't be opened - 10810.
    Everything else seems to be OK. However I do have to sign in to Google Mail every time, where in the past it opened up automatically.  I am a really novice at fixing problems, so any help would be great.

    The application Finder can't be opened -10810
    "A number of people are having a problem where the Finder will hang or crash, followed by a Finder error message saying "The application Finder.app can't be opened. -10810." The general agreement among affected users seems to be that this is spurred mainly when accessing external drives, but there could be a few other related reasons."
    From here >   http://reviews.cnet.com/8301-13727_7-10365239-263.html#ixzz1YWEWJFF8

  • The message 'The application "Preview" can't be opened -1712. appeared every time I tried to open a file (PDF, JPEG and others) Please help

    The message 'The application "Preview" can't be opened. -1712' appears on the screen every time I try to open a document (PDF, JPEG & others).  Anyone has an answer? Thanks.

    Thanks Meg,
    I had tried that, but tried it again. No luck...this is so frustrating! Can anyone help? I tried calling Tech Support but I am one month over the "Phone Support" warranty even though I pay monthly for a continued warranty. GRRRR Any ideas?? Thanks!
    Kimmons09

  • Error Msg: "The application iTunes can't be opened. -1712"  How can I open the application?

    Error Msg:  "The application iTunes can't be opened.  -1712"  Spinning Wheel from ****!  How can I open this application?

    Try downloading and reinstalling iTunes.
    Does iTunes start normally in Safe Mode by holding down the Option and Command keys when starting iTunes?
    If it works normally, take a look at this Apple doc -> iTunes: Troubleshooting issues with third-party iTunes plug-ins

  • The appliCATION PREVIEW CAN'T BE OPENED -10810

    When I try to "preview" a file, I am getting an error message that says "The Application 'Preview' can't be opened -10810
    How can I fix this?

    Try a restart.
    Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode - Mavericks
    Safe Mode - About

  • Just installed os x maverick and updated my version of pages now when I try to open a document stored in pages format from old version get message "The Application "pages" can't be opened -1712  What is wrong?

    Just updated to new version of pages.  Now can not open stored documents created under al pages.  Get message "the application pages can' be opened -1712"  hat do I do?

    Apple released Pages 5.0 to run on Maverics only. They completely rewrote the program for Maverics and 64 bit compatibility. They failed to explain that this version is missing much of the previous version's capability and that it cannot read older Pages files. When they install it they leave the older Pages 4.3 in place because it is the only way to read the older Pages files and upgrade them to a level that can be read by Pages 5!
    If you still have Pages 4.3 on your computer it will tell you what to do. If you do not then go into your backups and retrieve it.
    Because of the deficiences of Pages 5 I have removed it from my Mac and gone back to working with Pages 4.3. I have also removed Pages 2 from my iPad and found Pages 1.7 in the Time Machinew backups and brought it forward and droped it onto the iTunes icon to restore it and then synced the iPad to get the Pages 1.7 running again - it is compatible with Pages 4.3 on the Mac so all is back to normal for me.
    Apple say that they will fix many of the deficiences in Pages 5 in the next six months. I suggest you wait until then and keep an eye on these communities beforte considering the "upgrade".
    Incedentaly Pages 5.0 writes files that cannot be read by anything else including Pages 4.3 - better hope no one sends you one! It does not save RTF either - what where they thinking!

  • Getting message "The App Finder can't be opened" -10810

    I tried to relaunch my finder from "force quit" and launcher hasn't returned.  I get a boxed message saying:  "The App Can't be opened".  -10810........how can I get it back?  At the moment all I get is the revolving colored ball. 

    click here for information.

  • The application finder can't be opened -10810

    how to fix "

    Try a restart in safe mode. If Finder works there, start again normally and see if it is fixed. If not, run Console.app and see if any helpful error messages are being posted.
    Have you added any 3-rd party software recently?

  • Error "The application Finder can't be opened -10810"

    Hi there,
    I do not know what's going on at the office this week but our MacBook Pro gives this error when you turn it on. I cannot open the Finder and when I try to restart get stuck and nothing happens, so I force it on the power button. Although I was able to open a folder on the desktop.
    I have tried this https://discussions.apple.com/thread/4315534?start=0&tstart=0 but did not work.
    Any thoughts?
    Thanks

    Hi,
    try: "/System/Library/CoreServices/Finder.app/Contents/MacOS/Finder &" in Terminal to start the Finder manually.
    Michael

  • Am getting code the application finder can't be opened-10810

    Can someone be so kind as to tell me what this means and how I might solve the problem. Thank you in advance

    Thank you so much. Fixed the problem.

  • The Application Finder Can't Be Opened

    I have not used my iMac in a week.  Today when I clicked on Finder this message appeared:
    "The Application Finder Can't Be Opened - 10810".  Finder version 10.6.8.  The other issue today is all my folders had disappeared from my desktop.  The files are all here, but the folders don't show up.
    Anyone have this problem in the past and can provide me with help on how to resolve the problem?

    There is already topic going on with this:
    http://discussions.apple.com/messageview.jspa?messageID=10213212&stqc=true

  • When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?

    When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forum.
    Regards.

  • While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

    Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
    == Today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Maybe you are looking for

  • Error Message- 'The application was unable to start correctly (0xc000007b).

    'The application was unable to start correctly (0xc000007b). Click OK to close the application.' I receive the error whenever turning on my laptop, and have ever since installing Lightroom4. Please help!

  • Show that Adobe Acrobat Pro XI is installed on my Windows 8 computer, but I can't find the app list

    I am using windows 8 and the Adobe Cloud shows that Adobe Acrobat Pro XI is installed and updated, but I can't find the app, and, when looking at my list of programs to "uninstall", I don't see it listed either. (I thought a possible solution might b

  • Can I hook up a laptop connect card to iPad?

    okay, i want to make sure of this - if i get a Wifi iPad can I hook up a laptop connect card so i can have a connection no matter if i'm in a wifi hotspot or not? From what i understand there is no usb connections but i hear there may be a camera con

  • Help with disassemble of laptop.

    Hello guys, I have Toshiba Satellite L840D for about two years now. I am quite happy with its performance despite the overheating which is common on Toshibas and I am used to it by now.   I want to increase performance a bit and would like to disasse

  • Hello! can you help me?

    What version of Spiceworks is installed?How long has Spiceworks been installed?Has Spiceworks been working fine and this problem just started?Has Spiceworks recently been upgraded from an older version?Is Spiceworks installed on a physical computer o