Error message: "the drive is not ready"
Hi
I have an 20 GB ipod that I bought a few years ago (the one with the dock connector) and a few weeks ago it started to give me problems.
I can't transfer all my music from itunes to my ipod as the following message pops up after transfering about 2500 songs
"the drive is not ready for use; its door may be open. Please check drive\device\hardisk\DR7and make sure that the disk is inserted and the drive door is closed"
I have tried restoring the ipod and updating it with the 2005-10-12 updater. I have also updated itunes and checked both my c drive and the ipod harddrive for viruses, to no avail!!!!
I don't really know what to do next so if anyone has had a similar problem and has any suggestions on how I might fix it then I would be very very grateful
Thanks
dell optiplex gx220 Windows 2000
argh i have the exact same problem...
i bought my first ipod in june 04... may 05 i began getting connection and battery problems and so i sent it back... i recieved a new ipod of the same kind... black and white display, dock connector.. the four buttons at the top instead of on the wheel. now, four months after receiving my second ipod, i am getting more battery and connection problems, although they are not the same ones.
last week i got the same message you got and after doing the same things you did i gave up when it still didnt work. i today tried again to update. instead of messages like i recieved before about drive doors being open (after it had transferred 1000 songs might i add) i got absolutely nothing from my pc or itunes (which was open and playing a pearl jam song) and my ipod turned itself off (even though it has full battery). i originally believed that the source of my problems is that my ipod was dropped by my 3 year old brother onto my tiled family room floor (at it froze often) but knowing that others have similar problems im not so sure..
i have no idea how to fix this and i dont particularly wish to send my ipod back to apple and pay $250 for repairs, (for a second time), if that did result i would wait and buy myself an ipod photo for an extra few hundred dollars.
anywho.. if anybody at all knows anything that could possibly work that i havent done (not including calling apple customer service, i tried that last time and the indian man at the other end of the line was absolutely no help.) your help would be greatly appreciated
Thanks
Similar Messages
-
MegaSky 580 - Presto! Error message "The device is not ready"
Error message "The device is not ready. Please check whether your device is connected correctly."
I can see the device in the drop down menu of the settings window, when I select It, I get again the same error message.
If I plug off the usb stick, presto! Do not see the device anymore
I did have this problem since the beginning, I did try a lot ,
I install also the updates for the “digital TV usb min receiver” and the updates for the presto software (from the presto and msi homepage).
But nothing was helping.
After a couple of weeks I needed to reinstall the laptop from scratch.
And the first thing that I did was trying the presto software again, and it was working everything fine.
After a couple of weeks I install some other stuff and all of the Microsoft patches,
And I did get the same problem back.
So it seems that something is disturbing the communication between the USB stick and the presto software, but what!
The usb stick is working finr, I did try it with a powercinema trial version, and it is working, but why the OEM software of the USB stick not working, I hate it!
It would also helpful, to get a kind of log functionalities, due to the fact,
that no logs are available! Maybe somebody knows kind of switch to increase the verbosity and get an error log?
I have seen the same problem in this and other forums, so I’m not the only one.
But no solution found, maybe someone has found it…..
System:
HP nc6120 laptop
XP SP2 all security patches installedilko_t
The Acer laptop, whic works with Mega Sky 580, is a celeron, can´t remember the exact spec., 1,5 Ghz, 1G DDR
Think my faulty computer is similar to the one (B) you described... is it a Dell thing?
Quote from: ilko_t on 20-June-06, 21:40:59
I am having the very same problem:
3 Systems:
A- Desktop MB-Abit AN7, AMD Athlon 3000+ - working fine with all software and drivers updates. All aviable XP updates applied. XP Pro SP2
B- Laptop Dell Dimension 6000, Intel Centrino, 1.6Ghz Mobile, 512MB DDR2- cannot get it working- tried all aviable updates, all XP updates applied, XP Home SP2, Intel Chipset drivers- newest, says every time "The device is not ready. Please check whether your device is connected correctly."
C- Desktop Intel P4 3.0Ghz, 512MB RAM, Intel chipset- was working first 2 or 3 reboots then the same problem "device not ready", all updates, all XP updates, all motherboard updates, XP Pro SP2
On systems B and C the tuner is recognised properly in Device Manager and correct drivers installed(the newest from MSI+software patch)
The only logical conclusion I can make at this point is that there is something to do with the chipset make, as it works just fine on AMD and on Intel it won't, using the same software+drivers.
Any other ideas? Or just dump the thing in the bin -
"The drive is not ready for use; its door may be open. Please check drive \
3G IPOD problems which are driving me mad and i can see others have had the same problem but i can't find any solution written down.
Basically my IPOD either freezes after a couple of songs or it downloads about 6Gb (of 40) and the freezes with the following message:
"The drive is not ready for use; its door may be open. Please check drive \Device\Harddisk2\DR6 and make sure that a disk is inserted and that the drive door is closed"
I've tried re-setting, installing etc but no luck. Any suggestions/solutions?
Laptop - Packard Bell Notebook Windows XPHmmmm. I'm not sure how to explain this.
You need to change the Drive Letter for your iPod.
You should be able to connect your iPod then open Windows Explorer and right click on your iPod(which seems to be Drive E:) and change it to a different letter (like H).
If you haven't enabled disk use for your iPod it probably won't appear in Windows Explorer.
To enable disk use: connect iPod, open iTunes. Open Preferences and select the iPod tab. Choose "enable disk use."
Once you've done all that, try resyncing. -
IMovie error message "The operation could not be completed"
I am trying to create a new movie and got this error message " The operation could not be completed" after selecting the Themes.
Any suggestions?
ThanksMy problem was because I had moved my Movies folder from the system drive (which is an SSD) over to another drive with a larger capacity. I then created an Alias in my home folder. Turns out this is what was causing the problem. I shoulda known. Some apps absolutely hate this. iMovie, being the dumbed down garbage that it is, simply MUST have it's library in a certain folder, apparently. Would be nice if we had a choice about it.
I find Premiere Elements is actually the better (and friendlier) program. However in this case, I had to slum it with iMovie due to the Quicktime file I was working with. -
Popping error message "The disk was not ejected properly"
Although I am rejecting my external hard disks, still when I unplug them the error message "The disk was not ejected properly" pops up.
Worth to note that disks are not in sleep.
My McPro is running OS X Lion.I've been following this issue for a long time on one of the other Apple forum discussions. A suggestion was made to install an app called Jettison (by St. Clair Software). Since doing this two days ago, I have not seen the infamous "improper ejection" error message. Jettison seems to do, automatically without any effort on my part, exactly what the developer says: "Jettison eliminates the hassle of manually ejecting external drives before you put your MacBook to sleep and remounting them when it wakes."
By automatically unmounting my two external USB drives when the computer goes to sleep, Jettison is eliminating the opportunity for Apple's faulty USB power management system to improperly eject my external drives. As soon as my computer wakes up, Jettison quickly remounts the external drives. And, most importantly, Jettison has NOT caused any conflict with my Time Machine backups or my SuperDuper clone backups (three of which are scheduled to run automatically at 1:00am every night.
See: <http://stclairsoft.com/Jettison/index.html> -
Hi , I am trying to update iPod that has iOS 2.2.1 to iOS 4.2 but I am getting the following error message, "the iPod could not be restored. An unknown error occured (-1)." I would appreciate if anyone could let me know what the problem is and if it is possible how to fix it? Thanks
Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Bridge Crashing: Error message "The operation could not be completed. The file is Locked
Bridge is acting real funny lately: It won't close, so I have to force quite, then I get the error message: "The operation could not be completed. The file is Locked"
Thread 7:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 com.adobe.bridge5 0x0000000100671cf8 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 83992
2 com.adobe.bridge5 0x00000001006ae71e boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 332350
3 com.adobe.bridge5 0x00000001004d2c99 start + 5045481
4 com.apple.CoreServices.CarbonCore 0x000000010b28c8dc PrivateMPEntryPoint + 58
5 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
6 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
7 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 8:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 com.adobe.bridge5 0x0000000100671cf8 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 83992
2 com.adobe.bridge5 0x000000010066b372 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 56978
3 com.adobe.bridge5 0x000000010066939d boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 48829
4 com.adobe.bridge5 0x00000001004d2c99 start + 5045481
5 com.apple.CoreServices.CarbonCore 0x000000010b28c8dc PrivateMPEntryPoint + 58
6 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
7 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
8 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 9:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 SwitchBoardClient 0x000000011ebce948 void boost::condition_variable_any::wait<boost::unique_lock<boost::mutex> >(boost::unique_lock<boost::mutex>&) + 80
2 SwitchBoardClient 0x000000011ebc2cc8 adobe::switchboard::ConnectionQueue::run() + 300
3 SwitchBoardClient 0x000000011ebc78a3 boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>::operator()(adobe::switchboard::ConnectionQueue*) const + 97
4 SwitchBoardClient 0x000000011ebc7911 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>&, boost::_bi::list0&, int) + 65
5 SwitchBoardClient 0x000000011ebc794e boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> > >::operator()() + 54
6 SwitchBoardClient 0x000000011ebc796c boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> > > >::run() + 28
7 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
8 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
9 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
10 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 10:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 SwitchBoardClient 0x000000011eb66a41 boost::condition_variable::wait(boost::unique_lock<boost::mutex>&) + 59
2 SwitchBoardClient 0x000000011eb89433 adobe::switchboard::Client::run() + 111
3 SwitchBoardClient 0x000000011eb91e05 boost::_mfi::mf0<void, adobe::switchboard::Client>::operator()(adobe::switchboard::Client*) const + 97
4 SwitchBoardClient 0x000000011eb91e49 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Client>&, boost::_bi::list0&, int) + 65
5 SwitchBoardClient 0x000000011eb91e86 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> > >::operator()() + 54
6 SwitchBoardClient 0x000000011eb91ea4 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> > > >::run() + 28
7 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
8 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
9 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
10 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 11:
0 libsystem_kernel.dylib 0x000000010a98e36a __recvmsg + 10
1 SwitchBoardClient 0x000000011eba0b93 unsigned long boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::receive<boost::asio::mutable_buffers_1>(boost::asio::detail::reactive_socket_service<b oost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 537
2 SwitchBoardClient 0x000000011eba0d08 unsigned long boost::asio::stream_socket_service<boost::asio::ip::tcp>::receive<boost::asio::mutable_bu ffers_1>(boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 58
3 SwitchBoardClient 0x000000011eba0d42 unsigned long boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> >::read_some<boost::asio::mutable_buffers_1>(boost::asio::mutable_buffers_1 const&, boost::system::error_code&) + 56
4 SwitchBoardClient 0x000000011eba1dbb adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::runOne(boost::shared_ptr<adobe::switchboard::Connection<boost::asio::basic_stream_sock et<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&) + 185
5 SwitchBoardClient 0x000000011eba2063 adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::run() + 69
6 SwitchBoardClient 0x000000011eb91cd5 boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >::operator()(adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio ::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*) const + 97
7 SwitchBoardClient 0x000000011eb91d19 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&, boost::_bi::list0&, int) + 65
8 SwitchBoardClient 0x000000011eb91d56 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > >::operator()() + 54
9 SwitchBoardClient 0x000000011eb91d74 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > > >::run() + 28
10 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
11 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
12 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
13 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 12:
0 libsystem_kernel.dylib 0x000000010a98e36a __recvmsg + 10
1 SwitchBoardClient 0x000000011eba0b93 unsigned long boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::receive<boost::asio::mutable_buffers_1>(boost::asio::detail::reactive_socket_service<b oost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 537
2 SwitchBoardClient 0x000000011eba0d08 unsigned long boost::asio::stream_socket_service<boost::asio::ip::tcp>::receive<boost::asio::mutable_bu ffers_1>(boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 58
3 SwitchBoardClient 0x000000011eba0d42 unsigned long boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> >::read_some<boost::asio::mutable_buffers_1>(boost::asio::mutable_buffers_1 const&, boost::system::error_code&) + 56
4 SwitchBoardClient 0x000000011eba1dbb adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::runOne(boost::shared_ptr<adobe::switchboard::Connection<boost::asio::basic_stream_sock et<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&) + 185
5 SwitchBoardClient 0x000000011eba2063 adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::run() + 69
6 SwitchBoardClient 0x000000011eb91cd5 boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >::operator()(adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio ::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*) const + 97
7 SwitchBoardClient 0x000000011eb91d19 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&, boost::_bi::list0&, int) + 65
8 SwitchBoardClient 0x000000011eb91d56 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > >::operator()() + 54
9 SwitchBoardClient 0x000000011eb91d74 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > > >::run() + 28
10 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
11 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
12 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
13 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 13:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 MultiProcessor Support 0x00000001165ac113 boost::condition_variable::wait(boost::unique_lock<boost::mutex>&) + 139
2 MultiProcessor Support 0x00000001165ac1d0 ThreadFunctor::operator()() + 92
3 MultiProcessor Support 0x00000001165c8f70 thread_proxy + 160
4 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
5 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
6 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 14:
0 libsystem_kernel.dylib 0x000000010a9894de mach_msg_trap + 10
1 libsystem_kernel.dylib 0x000000010a98864f mach_msg + 55
2 com.apple.CoreFoundation 0x0000000106e8fb34 __CFRunLoopServiceMachPort + 212
3 com.apple.CoreFoundation 0x0000000106e8effb __CFRunLoopRun + 1371
4 com.apple.CoreFoundation 0x0000000106e8e858 CFRunLoopRunSpecific + 296
5 com.apple.AppKit 0x0000000101fac33b _NSEventThread + 137
6 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
7 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
8 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 15:
0 libsystem_kernel.dylib 0x000000010a98e94a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x000000010aaa140d start_wqthread + 13
Thread 16:
0 libsystem_kernel.dylib 0x000000010a98e94a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x000000010aaa140d start_wqthread + 13
Thread 17:
0 libsystem_kernel.dylib 0x000000010a98e94a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x000000010aaa140d start_wqthread + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000001 rbx: 0x0000000123d20ff0 rcx: 0x0000000023d20000 rdx: 0x0000000000000000
rdi: 0x0000000000000000 rsi: 0x0000000000000067 rbp: 0x00007fff5fbff880 rsp: 0x00007fff5fbff870
r8: 0x0000000111d0da00 r9: 0x0000000000000600 r10: 0x0000000012e3bdbc r11: 0x0000000000000000
r12: 0x0000000000000000 r13: 0x00000000000000ce r14: 0x0000000000000067 r15: 0x0000608000018700
rip: 0x000000010495a94d rfl: 0x0000000000010202 cr2: 0x000000000000003c -
Running Adobe Acrobat Professional 10.1.0. I cannot upgrade to newer version because several applications were already tested on this version.
When trying to complete an electronic signature, my users receive the error message ""The document could not be saved. This file is already open". When they close and open the file again to try to sign again they find a corrupted electronic signature. Instead of a clean signature with the box colored in light blue they see their signature with the embedeed message Click Here to Verify & Sign with the box colored in grey.
We turned off antivirus in the Sharefolder where the forms are stored and nothing. We turned off the antivirus on the client and nothing. We stored the files in another server and nothing. One workaround is saving the file in the desktop, signing it, and then back to the Sharefolder. Another is saving the file with a different file name.
I've searched and the only similar thing was caused by the Windows Preview Pane. See Information Transmogrification: Adobe Acrobat saving a file does not work, displays “File may be read-only”. No luck with this one too.
Is definitively an intermittent problem. The users that experience the problem experience it intermittently.
This started to happen when we move our computers to Windows 7.
Any ideas?Correction on Question:
This is a web application and the users need to be able to load the editable .pdf form from the website, edit it and submit it back to the website from within Internet Explorer.
Users began getting the error message:
'The document could not be saved. This file is already open.'
last Friday after having no problems prior to this. Some users can edit the editable .pdf forms on the website and save the file with the same name to the website. Some get the error mentioned in the subject.
We really need help getting this resolved.
Sandy Martin -
Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded."
How can I fix it?Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
I am getting the following error message, " The URL is not valid and cannot be loaded" when I try to go to firefox home. I uninstalled add-ons , uninstalled Firefox and then installed a fresh version. Still have the problem.
Thanks for the helpThat issue can be caused by a corrupted or incomplete Visual C++ installation (multiple versions can be installed side-by-side; SxS) that is missing some runtime components (Redistributable Packages) that Firefox depends on (problem with an embedded manifest file that specifies a specific runtime version).
You need to install the missing components (e.g. VisualC++ 2005 Redistrbutable).
* https://www.microsoft.com/download/en/details.aspx?id=5638
*[[/questions/908165]] The URL is not valid and cannot be loaded
*[https://bugzilla.mozilla.org/show_bug.cgi?id=713167 bug 713167] - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll -
I am trying to restore my ipad2 but i have the error message "The IPAD could not be rerstored. The device cannot be found"
Can anyone help me?Are you using the latest version of iTunes?
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Cheers, Tom -
Mac os x 10.7.5 - pixma mg3220 - connected usb gets error message " the printer is not connected"
hi, I'm a newbie wrt to mac printer operation.
1.I installed a mg3220 using the wps button on my smc barricade router and can print wireless with a windows 7 printer.
2. my wife has a mac. The printer is on and connected direcly with the usb cable.
she gets the error message " the printer is not connected".
how can we override this error message and print via USB?
thanks and regards.
jmpaqHi, I have 10.6.8 and an HP printer so it may be slightly different but I'll give it my best shot:
Go to System Preferences.
Click on "Print & Fax"
Near the top of that page you should see "Print" and "Scan" options. Click "Scan"
A button appears that says "open scanner"
The settings are different between the different scanner models so I'm not sure what the next window will look like, but it should be pretty straightforward from there. It will scan to a JPEG image which you can attach to an email. I hope that helps! Let me know if there's anything ense I can help with. -
I can't transfer a rented movie from my iMac to my iPad. It get the following error message- the rental could not be transferred to the iPad because it has already been transferred to another computer or device. I have not transferred it to anywhere device.
Is the computer connected to the the internet?
-
Trying to update my iTunes but keep getting the error message "the URL could not be opened" what does this mean and how do I resolve this? It's always worked fine in the past!
Select a broken track and press ctrl-i to Get Info. Look on the summary tab for the location where iTunes "thinks" the file should be. Where is it really? Post back the two locations and I can suggest the best approach.
tt2 -
I have been trying to update to IOS 6 for 3 days now - my Iphone4S is in middle of restore and it gets so far then stops - no error messages - the bar does not move further. it stops at different places -
can anybody help please
KulbirStewart
This forum is for questions regarding the LabVIEW Datalogging and Supervisory Control Module. You will have more luck posting this question in the general LabVIEW forum.
Good luck
Maybe you are looking for
-
Revision: 1751 Author: [email protected] Date: 2008-05-15 14:21:43 -0700 (Thu, 15 May 2008) Log Message: Bug: BLZ-174 - MessageClient.testMessage() is incorrectly doing a string compare for the subtopic header of an inbound message against the subtop
-
[SOLVED] Unable to boot after a pacman and etc-update
I updated my machine with pacman following which I started having issues with pacman complaining about unavailable database and stopped working. Then thinking it to be the problem with new configuration files, I ran etc-update and merged the pacnew f
-
Error about database conenction
hi everyone i ve a problem about connecting to ms sql server. i ve made two tables on MSsql server names are rezervation and sale. those tables ve same column names. column names are name(varchar50) surname(varchar50) airline(varchar50) flight_no(nva
-
I have transferred some AAC files to the phone using Nokia Music Manager and PC Suite sw but the filnames are all just the track numbers. I typed in the title, artist and album in Music Manager before transferring to the phone but the info is not sho
-
My Ipod nano's charging icon doesn't appear
since i got my ipod nano 4gb, 4 days ago i have noticed that when I plug in my it into my computer to charge, I don't see the green battery icon, instead I get the DO NOT DISCONNECT red circle. No matter how long its plugged in, that icon doesn't go