Error message the file "itunes.itl" cannot be read because it was created by a newer version of iTunes.
I had to do a system recovery with a prior date. now I get an error message: the file "iTunes.itl" cannot be read because it was created by a newer version of iTunes. Anyone have a solution?
I know this is an old thread, but the information in it solved my current problem (Windows Vista, upgraded to iTunes 11.2 and resulted in this same .itl error message).
So, I'm here to thank turingtest2 for his excellent instructions to fix my problem. One of tt2's many detailed instructional tips). THANK YOU TURINGTEST2!
PS I'm generally reluctant to "mess with files and such, preferring to use Windows Restore, because it just doesn't seem right to me that end users of Apple devices should have to get into the guts of files and such. Sadly, I have finally just accepted that iOS updates never work right and I either have to deal with work-around fixes or never update. Eventually we do need to update or there will be other problems. All I can say is, I'm sure glad there are folks like turingtest2 here who spend so much time helping us.
Similar Messages
-
I was told to uninstall my itunes and reinstall. After doing that, I am getting this message,"The files iTunesLibrary.it cannot be read because it was created by a newer version of iTunes". How can I get my music back on the computer?
Hi there catbarn111,
You may want to try re-creating the iTunes Library as an initial troubleshooting step. Take a look at the article below for more information.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
-Griff W. -
Has anyone had any luck getting ITunes to work properly on a Windows 7 PC lately? Up until today, I could not open my ITunes at all because it said the disk was locked. A very helpful person at Apple Care told me to go into properties and release the read only box. I did and it did not help. So I uninstalled ITunes and downloaded the newest version. Now I get the message: ITunes Library.itl cannot be read because it was created by a newer version of ITunes.
Can anyone help me out with this? Thanks.See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
Disk was reimaged due to a virus infection. For some reason downloads of new 10.6 version failing, so tried stored install file for 10.4. Now have 10.4, but it won't read the library file. Any suggestions?
Stop trying to use an old version of iTunes.
Install the latest version from http://www.apple.com/itunes/download -
Just downloaded Itunes 10.6 on windows7 64bit and now cannot open Itunes get error msg:ITunes Library.itl cannot be read because it was created by a newer version of iTunes.Tried uninstall and reinstall any help ? Thanks
Even I am facing a similar problem. Initially the iTunes worked on my windows 64bit edition. Ever since I downloaded the latest version it has stopped identifying my 4S with an error msg that asks me to download the 64bit edition. I have tried it again and again but it did not help. After unistalling and downloading again the new error msg says " the file- iTuneslibrary.itl cannot be read because it was created by a newer version of iTunes". Please help!!!!!!!
-
My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
Hi I'm having problems installing and starting itunes program on Windows 7 64bit. After install the following error message is flagged - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would really appreciate any pointers!
Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.
-
I installed iTunes 64 on a Windows 7 (Home) HP Pavilion and received this error message. the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Please help!
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
I cannot get i-tunes. I tried the download, but no help. I get an error message The file "iTunes library itl" cannot be read because it was created by a newer version of iTunes. Any suggestions?
If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic! -
updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??
hello!
i have a similiar problem:
i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
thanks, florian -
After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". So, now after the upgrade, I cannot access iTunes. How do I resolve this??
Thankszepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Trying to Transfer iTunes to a New computer, but I get the error message The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes --- HELP
Did you downgrade iTunes? What version is listed in Help> About iTunes?
If you don't have iTunes 10.5.2, download it from here -> http://www.apple.com/itunes/download/
If you have iTunes 10.5.2, try re-creating your iTunes library. -
I am not able to open my iTunes on my HP pavilion dv7-3173nr entertainment notebook: I receive error message: The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes". How can I correct this so that I can open my iTunes on my notebook?? dorothy278
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
I uninstalled iTunes, and reinstalled, (most current version of iTunes, of course) per advice given on this forum. I got this error message when I tried to open iTunes: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." Resolution of this issue would be great. It seems as if I am having at least as many problems now with iTunes as I have had with Windows products in the past. That really *****!
I know this is an old thread, but the information in it solved my current problem (Windows Vista, upgraded to iTunes 11.2 and resulted in this same .itl error message).
So, I'm here to thank turingtest2 for his excellent instructions to fix my problem. One of tt2's many detailed instructional tips). THANK YOU TURINGTEST2!
PS I'm generally reluctant to "mess with files and such, preferring to use Windows Restore, because it just doesn't seem right to me that end users of Apple devices should have to get into the guts of files and such. Sadly, I have finally just accepted that iOS updates never work right and I either have to deal with work-around fixes or never update. Eventually we do need to update or there will be other problems. All I can say is, I'm sure glad there are folks like turingtest2 here who spend so much time helping us. -
I needed to upgrade my iTunes to register and sync a iPhone 5c. I upgraded by Apple Software and finally was able to download the upgraded iTunes. When I try to start iTunes I get this message, "The file iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. How can I repair this?
If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!
Maybe you are looking for
-
MBP takes long time to restore wired network connection after wake-up
Hello... My Mid-2010 MBP (MacBookPro6,2) has been experiencing this problem recently -- Whenever I wake up the computer from sleep, it needs approximately 10 seconds to restore its wired network connection. I know there are other annoying connection
-
Oracle App Server 10.1.3.1 + Struts2 parameter map loss
hi, I am facing an issue with oracle app server 10.1.3.1. With an application deployed in it, any .action hit seems to lose the parameter map. However, i m using Spring MVC with jasper reports for reporting purpose. So hitting a .report seems to go t
-
How to display Session value of an item using Javascript?
Hello All, I have a file browse item and I browse some file and click on upload, i run this javascript : function passBack() javascript:doSubmit('UPLOAD'); alert('hi'); var var_flag = $x('P91_FILE'); alert(var_flag.value); opener.document.forms["wwv_
-
Why doesn't my Layer menu look like Julianne's?
I was watching a tutorial by Julianne Kost "Creating Transparent Logos for Watermarks and Overlays in Photoshop CC Her layer menu had a selection "Type", "Create Work Path" and mine did not. Any idea why not?
-
planning to purchase new pc (windows 8 OS) for use with CS6. will otf fonts work automatically? if no, what do i do to make it work?