Error message" The file may be damaged or corrupted -1610153464/ also unable to open projects in the background 26:: 142
Hello everyone,
I hope someone can help me.
I am using AE CC/Windows 7 on a Dell computer, 32 GB RAM, 64 bit op system, processors: Intel (R) Xeon (R) CPU x5670 @ 2.93 Ghz 2.93 Ghz (2 processors).
So far I had worked on many projects with no problems and then a few weeks ago the project crashed non stop. The problem was overcome when I got rid of all MP3s and converted them to RAM. Again this was an issue I didn't have in the past and I don't recall changing anything.
Now it seems it is impossible for me to export/render out a project into a Quick time file or even AVI. If its quick time I get this message: After Effects unable to render error an output module failed. The file may be damaged or corrupted -1610153464 and if I am trying to export with AVI I get this message: AE unable to open projects in the background 26:: 142)
This is happening with different projects.
I read the forums and heard that the problem may be a Bug with quicktime and H.264? I never had a problem with it before but again when I try to export AVI I get this error message:
AE unable to open projects in the background
I have a feeling it is quick time related. I have uninstalled and reinstalled QT but still get the problem. It will open old QT files no problem. I tried to download a bug fix update as one post suggested but I think I have the latest which is why it didn't work.
This particular project has a couple of quick media H.264 files. Do I need to convert them? Are they the cause for all of this?
I am sorry I really tried to look for answers in the forums before contacting you here but I cannot find a reason for all this mess, which again only appeared a few weeks ago with no problems for months...if someone can point out an area where I can start looking, I would really appreciate it. Thanks in advance.
update: I converted all the H.264 footage which were in the project to WMV. And I was able to test export with AVI and it turne dout fine (like 10 seconds). However I still got the Error message: "After Effects unable to render error an output module failed, a filme may be corrupted or damaged. Error-1610153464 " when I tried to export H.264 QT..
I don't know what to do now, how can a problem which did not exist suddenly come up. How can I export a QT file? with AVI it will be massive!
Many thanks
Amanda
Similar Messages
-
Error "Output module failed. The file may be damaged or corrupted (-1610153464)"
Hi all.
I using After Effect CS5.5, but i didn't render some projects. Error:
And
Render Best Setting AVI or Quicktime (with OpenGL or without OpenGL).
I try to unstall and reinstall AE, Quicktime but it don't success.
Note: Render with ffdshow is normal.
Some project don't appear error.Code Packs:
-
An output module failed. The file may be damaged or corrupted.
Whenever I try to render something in After Effects CC 13.1.1, an error message pops up, saying "After Effects error: Rendering error while writing to file '[not going to disclose]' An output module failed. The file may be damaged or corrupted (-1610153464)."
Screenshot of the error message:
I tried reinstalling QuickTime (7), repaired it, updated After Effects to the latest version(as I am writing this), checked firewall software, and used other formats such as AVI.
Adobe Media Encoder (CC 2014-latest version) won't work with me, either.
I sent the composition to Adobe Media Encoder, and this is what I got, no progress here.
Screenshot:
It took a while to connect to the dynamic link server, and failed.
This is a log of what has happened in Adobe Media Encoder.
- Source File: C:\Users\Default.BronyGue\Documents\not done\pinkcoverart_AME\tmpAEtoAMEProject-Pink Intro1.aep
- Output File: C:\Users\Default.BronyGue\Documents\not done\pinkcoverart_AME\Pink Intro.mp4
- Preset Used: YouTube HD 720p 29.97
- Video: 1280x720 (1.0), 29.97 fps, Progressive
- Audio: AAC, 320 kbps, 48 kHz, Stereo
- Bitrate: VBR, 2 pass, Target 5.00 Mbps, Max 5.00 Mbps
- Encoding Time: 00:00:12
06/29/2014 02:29:14 PM : Encoding Failed
The Operation was interrupted by user
(no need to worry about the above part)
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage1.aep
- Output File: C:\Users\Default.BronyGue\Videos\chilledup.wmv
- Preset Used: Custom
- Video: 1280x720 (1.0), 29.97 fps, Progressive
- Audio: Windows Media Audio 10 Professional, 96000 Hz, Stereo, 24 bit
- Bitrate: CBR, 2 pass, Max 10000.00 kbps
- Encoding Time: 00:01:42
11/22/2014 12:24:39 AM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage1.aep
- Output File: C:\Users\Default.BronyGue\Videos\chilledup.mpg
- Preset Used: Custom
- Video: 1280x720, 29.97 fps, Progressive, Quality 75
- Audio: MPEG Audio, 384 kbps, 48 kHz, Stereo, 16 bit
- Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 Mbps
- Encoding Time: 00:00:11
11/22/2014 12:52:11 AM : Encoding Failed
The Operation was interrupted by user
- Encoding Time: 00:00:51
11/22/2014 12:53:51 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Encoding Time: 00:00:46
11/22/2014 08:39:46 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage4.aep
- Output File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\montage.mpg
- Preset Used: Match Source - High bitrate
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:00:00
11/22/2014 10:06:45 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
I need some help! Any solutions?.
Computer Specs:
AMD FX-6300
8GB 1600MHz DDR3 RAM
NVIDIA GeForce GTX 650 Ti BOOST
1TB 7200RPM Hard Drive
Windows 8.1 Update 1(with latest updates)
EDIT(11/23/2014 8:31PM PST): For some reason, other projects work for me just fine. I am not sure why it is not working on one project.
Screenshot of a new project other than this I am rendering at the time of writing this edit:Can other projects can output to the same output location? Yes
Can other projects render with the same render settings (codec, format, etc.)? Yes.
If you create a new composition and just add a solid layer to it with no effects in the same project does it render? No. I still get the error.
Can you render that brand new comp with the same render settings, output settings, output location etc.? Yes.
If so, what effects are present in the offending comp? Twixtor Pro in all the cinematics/clips, Motion Tile and Transform for pan/crop & wiggle, Magic Bullet Looks and Bad TV Warping preset with just Wave Warp & Venetian Blinds for color correction, Gradient Ramp for text, Bad TV Warping preset with everything for effect, Transform for fade in/out, and ReelSmart Motion Blur v4.1.2 for motion blur.
Also, what scripts are you using? Just the Move Anchor Point script I found from one of Mt. Mograph's videos, Summit 16 - 2.5D Minecraft Steve - After Effects - YouTube.
Have you ever installed any third-party codec packs? (I've heard of some codec packs causing weird issues like this.) Yes, (not everything I have, just everything I can think of and find) I have K-Lite codec pack, Fraps, x264vfw, and Xvid MPEG-4 codec. -
I am running Adobe After Effects CC 2014.0.2 on a Windows 7 Ultimate Machine.
When the user begins to render an uncompressed file she receives the following error message:
I have been searching all day for solutions to this error with no luck so far. All that I have found deal with Mac OS (which does not apply here) or .mov files (also not the issue here) and I am stumped. Any suggestions on how to resolve this error?Here you go:
-
Recurring rendering error "an output module failed. The file may be damaged or corrupted"
From today onwards I've been getting this error whenever I'm exporting to Quicktime mov (at least H264 and DXV). I've been reading a lot about it and it seems to be an ongoing issue, related to the QT32 server (whatever that is). I haven't been able to find a satisfactory solution yet. One thing's for sure, it's messing up my workflow.
Some additional info:
System: Mac
OS: 10.9.2 (Mavericks)
Adobe: Adobe CC
Quicktime: Version 10.3
One other weird thing is, whenever I quit and restart AE, it renders fine once. After that it breaks.
Hope you can help!AE version: CC 12.2.1.5
Updates: Yes, everything is updated to the last version.
Mac OS: 10.9.2 (Mavericks)
Hardware: Processor: 2.8 Ghz Intel Core 2 duo
Memory: 8Gb 1067 MHz DDR3
Graphics: NVIDIA GeForce 9600M GT 512Mb
#Cores: 2
Harddisk: Samsung 840 EVO 500GB
External HD's: None
Drivers: CUDA: Installed the most recent version 3 weeks ago, tried finding the
version.. Sorry I'm a real nOOb when it comes to this stuff
3dparty hardware: None
Source footage: See previous post
Error message:
I can replicate the error again and again. I can predict that it will work fine the first render, second time it breaks.
I've done this a million times in CS5, and it worked fine in the CC trial. As soon as I went to 'full', it broke.
I REALLY hope this is sufficient information!
Tnx for taking the time to help me out -
i just tried to open video file on youtube. but it shown "can't open "video.3gp". The file may be damaged or may not be a movie file that is compatible with QuickTime Player. How can i solve this issue?
i just tried to open video file on youtube. but it shown "can't open "video.3gp". The file may be damaged or may not be a movie file that is compatible with QuickTime Player. How can i solve this issue?
In what file type and compression format did you download the YouTube content? I.e., to avoid such issues, you would normally download the source files as content that is natively compatible with your target player or convert incompatible file type/compression format combinations to files that are compatible with your targeted media player. -
After I loaded ilife 11 and tried to open iphoto, I could not and had a message saying it may be damaged or incomplete. It was working fine yesterday and I've never seen this message. What should I do?
First run Software Update so you have the latest version.
If you still have trouble then hold down CMD and OPT as you click on iPhoto. It will give you options to rebuild your library.
Regards,
Captfred -
I am having a problem moving files from an imac in one location to an imac inanother location. I have tried using Dropbox which is installed in both locations but when i drad a file ino yhe app it becomes an alias. When I get to the other location it says I can't open the file because the " original application that created it is not present". This is despite the fact that the app that created both files is installed in both computers. If I use the Public folder in the idisc, when I get to the other location the file isn't there. Am I forgetting to turn something on or off? Should I manually sync the Public folder and if so how? Thanks
Message was edited by: stephenfromdelray beachSo now that's two of us. Hopefully, someone has an answer.
-
Does any one out there have any suggestions?
Hello,
How was your phone backed up?
Via iCloud or via iTunes.
If you have an iCloud back up maybe try following this: http://support.apple.com/kb/ht4859 and see if that works. -
[MX 2004} Can't upload! The file may not exist, or there could be a permission problem
I'm running MX 2004 on Windows XP. All's been well for the
last few months, doing site maintenance at this part-time job. I
get tangled up a bit in checking files in and out, coming from
GoLive, and since there's no one else with FTP access, yesterday I
told it to check the entire site in. I didn't have any changes I
didn't want to commit, and I figured that would keep things a
little neater.
As of today, I can post revisions to existing pages, or
resize image files, but when I create a new page, or try to place a
new image file on an existing page, I can't upload it.
So, to be clear: I have two pages already up on the site,
index.html and apple.html, with a link between them. If I create
new page banana.html and make a link to it from index, index.html
will upload that revised link, but banana.html is refused with the
message
FTP error: The file may not exist, or there could be a
permission problem
I know the file doesn't exist (remotely); I just made it.
I've gone to Prefs and disable Check In / Check Out, which didn't
do me any good. What next?Can you open the FTP log, select one of these new files and
upload it- then
cut and paste relevant part of the ftp log?
Also- does this site have a "host directory", a subfolder
that your public
files need to go into? If yes- is this folder listed in the
host directory
line of the remote server info?
And odd past thing i've seen-
Had hosting that used public_html as the public folder name.
They also had a symbolic link named www that pointed to
public_html
Could upload/download existing files with www in "host
directory" line of
dw; but could not upload new files or work with files in
subfolders.
changing to public_html instead of the www symlink fixed this
for me.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
I need to publish to a local folder on my desk top and I am getting this error message.
can’t create the file “header.jpg.” The disk may be damaged or full, or you may not have suuficient access priveleges.
Please help... I need to copy to a disk... it was working fine until I attached a big project, I tried to delete the project, but still not workng.Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT -
I receive the following error message when trying to publish site changes to iweb:
"Can’t create the file “shapeimage_2_link_0.png.” The disk may be damaged or full, or you may not have sufficient access privileges."
Can anyone assist?Try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
... and then republish. -
Receiving error message using current Maverick version: "Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).". Is fix the same as on previous OS versions?
Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari. -
Publish error "Can't create the file "......." The disk may be damaged...
Here is the full message.
Can’t create the file “ACRfull logo.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges.
I had this the other day too and I was able to get around it by changing two of the pictures; however, I took all of the pictures with my own phone and some of these are logos that are small. How do I fix this error message.
I appreciate the help!Joshua ~ Welcome to the discussions. If simply re-starting iWeb doesn't help, this may:
"Go to Finder -> HomeFolder -> Library
Move entire folder "Caches" to desktop
Restart iWeb and publish
It may work now
You can now delete "Caches" folder in desktop."
More suggestions may be found by doing THIS. -
I made some changes to my iWeb site, and when I try to publish it, I get the error message: Can’t create the file “Mod_footer_bg.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges.
What do I do now?Try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.htm
Maybe you are looking for
-
I was instructed by I Tunes to restore my Iphone 4 - ITunes has since said it is unable to restore. I am now left with a black screen with Itunes logo on it and a picture of the charger attachment at the base of the screen and I am unable to do any
-
Hi all. I am trying to create a new order that the datasource I got from other tables , Using the DI API , I get an error ("Item no. is missing [ODLN.ObjType]") when trying to create it . Set oOrderDoc = oCompany(i).GetBusinessObject(SAPbobsCOM.BoObj
-
"Prodcut allocation check not allowed for ATPcat.'BR' and application".
SAP Experts, Whenever, I delete a delivery, I am seeing a pop-up message with the information message as "Prodcut allocation check not allowed for ATPcat.'BR' and application". Is this a standard functionality. We dont have ATP Check/Allocation check
-
I updated my iphone 3g and now itunes is saying that it's restoring iphone software it's now been doing this for about 5 hours and i'm not even half way through is this normal? someone please help thanks
-
It is possible to expand more than 8gb on memory ram?
hi i have a question it is possible to expand more than 8gb on memory ram in the macbook pro 15 inch??