Error message `the HP series 1050 J410 cannot be found

i have an HP Deskjet 1050 All in one printer. I have been using it for a couple of years without problems, but since a month it doesn´t scan any more. The error message is `HP deskjet 1050 J410 series cannot be found`. This problem exists when I try to start the link on the desk of the computer as well as when I try to start the scan with the start menu of the computer, which is running on Windows 7. Do you know how to solve this problem?

Hello missessgrass,
Welcome to the HP Forums!
I understand you're unable to scan a document and a message appears stating "The Deskjet 1050 J410 cannot be found". I will do my best to assist you! I would recommend following this entire HP document on A 'Connection Error' Message Displays during Scanning.
If this document doesn't resolve your issue, then follow this HP document on Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection.
Please post your results, as I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

Similar Messages

  • I can't open my Itunes keep receiving error message- The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder

    I can't open my Itunes keep receiving error message- The iTunes Library.itl file  cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. I have even tried removing and reinstalling iTunes and it still does work because I continue to receive this error message. Please Help!

    Anyone can help to advice how to solve this issue ?

  • Error Message::: The volume for "CIMG0010.JPG" cannot be found.

    When I import to iphoto, I get this message:
    The volume for “CIMG0010.JPG” cannot be found.
    Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.
    I have to press Cancel each time to resume importing.
    Anyone have same problem?
    Thx for your help.
    Happy Holidays!
    Ms. MiniMac

    I too had this problem but found a very simple solution*. No rebuild needed.
    For anyone else who runs into this problem here is what happened to me, and what I did about it (for reference):
    I checked to make sure all software was updated, I tried different memory cards, I tried reformatting cards and used a card reader and tried straight from my camera (Canon 40D). I was downloading over 250 photos and after sitting there hitting 'Cancel' on each photo TWICE my photos finally loaded... or so I thought. When I went to open them, only the thumbnails were there! Argh!
    Thankfully I didn't delete the memory card, and this time I tried downloading to a new folder on the Desktop and then importing to iPhoto. I got the same error. I tried locating each photo with the 'Find Photo' button and this opened the correct folder and after I scrolled down it had even highlighted the correct file. Unfortunately this did not work.
    I tried a photo at the beginning, middle and end of the shoot to see if the memory card was somehow corrupt. Same problem with each. Eventually I did load my photos but again, only after I hit cancel for each one of the 250 photos. Interesting that after I hit 'cancel' it would download the photo.
    The 'duplicate image' window came up for the 3 images I had randomly selected earlier, so I didn't think it could have been a naming problem. After all, I have been using the same camera for a while with sequential numbering enabled.
    After reading Terence's reply (thank you) I was even more flustered that I would have to rebuild a database that I thought I was careful creating and backing up. Backing up... That was it!
    I have over 40 gigs of photos on a USB drive from before I owned my Mac. I choose to use iPhoto to catalog the files but did not want to load them all on to my laptop and clog up useful memory.
    It occurred to me that as Terence had suggested iPhoto may be trying to double check the new images against old ones, but the old ones can't be found. Even though the files were on completely different drives.
    After simply plugging in my USB drive the photos downloaded to my MacBook immediately. Just to be clear, the photos were not using the same names as old ones nor were they being written to the USB drive; but iPhoto needed to have that USB drive plugged in to download photos to the laptop hard drive.
    This is an easy fix, and avoids database rebuilding, but I am worried about when I go traveling etc. and need to download photos without my USB drive handy...

  • Itunes error message - the itunes library.itl file cannot be found or created

    My itunes was working yesterday but today when i open it i get an error message saying "the itunes library.itl file cannot be found or created. the default location for this file in in the itunes folder in the music folder."
    I have tried to reinstall itunes but still getting the same error when clicking on itunes
    Please can you help?

    Hold down the Shift key while trying to launch iTunes. You should see a dialog box asking you to Choose or Create a library. Click "Choose library"
    Browse to the default location of your iTunes Library.itl file:
    Windows XP: \Documents and Settings\username\My Documents\My Music\iTunes\
    Windows Vista: \Users\username\Music\iTunes\
    Windows 7: \Users\username\My Music\iTunes\
    ... and doubleclick the file.
    Does your iTunes open for you now?

  • Error message "The Volume for "IMG_5727.JPG Cannot be found.

    Help!
    I have been recieving the error:
    "The Volume for "IMG_5727.JPG Cannot be found.
    Insert the disk or connect to the server volume and
    wait for it to appear on the desktop, then try again."
    It has been happening for months but I am editing/moving
    wedding pictures(900 plus) right now and it is impossible to work around this. They are new images that were just down loaded from the card reader.
    I can see the pictures right in the library
    Help!
    Kathy

    You say you are "editing/moving" pictures from a wedding.
    Depending on what you mean by that, it could be creating the problem you're having.
    Are you physically "moving" your pictures within the finder, or do you just mean dragging and dropping within iPhoto?
    Usually, the way iPhoto works is you upload them into iPhoto from a card or some sort of volume.
    A new file is created in the iPhoto library.
    That file never leaves the library as it is now the actual link to iPhoto.
    However, if you physically move that file from the library, you will break the link and have lots of problems.
    You can't move files from the iPhoto library.
    However, if you're not physically moving photos from the library (manually, via the finder), and if you are uploading into iPhoto, and iPhoto shows you a thumbnail and when you click on it, it gives you that message, then there might be something wrong with the volume iPhoto thinks it's uploading pictures to from your card/source volume.
    I would reestablish a new volume to save to and see if it's still having the same problems. Make sure you backup the original library though.

  • Error message The volume for "linen.jpg" cannot be found.

    Hi Community,
    I have a number of photos in my library that appear in the photos and events, but if I try to edit it, copy it, move it, or link my other desktop to my laptop iphoto where these photos live, I get a message that says the volume cannot be found.
    Then if I click edit, I get another message that reads
    Image Cannot be Edited
    The original is offline.
    Can anyone tell me how to fix this?
    I no longer have the original files to re import.
    Thanks!
    Lee

    You get that message when the library is a "referenced" library and the source file is not where it was when it was originally imported into the library. Check the iPhoto Advanced preference pane to see if you're running a managed or referenced library.
    What version of iPhoto and system are you running?
    OT

  • Error message "The Itunes Library.itl file cannot be found or created.

    It goes on to say that "the default location for this file is in the "itunes" folder in the "music" folder." Help!!!!! I have found the file, however everything I have tried only produces the same message indicating the file cannot be found.

    When you get that message, does iTunes give you the option of locating the file? If so, then browse to the file and select it. If you don't get that option, I believe that holding down the shift key (or possibly the control key) when you launch iTunes should cause you to get the option.

  • ITunes will not open.  i get error message, "the iTunes Library.itl file cannot be found or created.  the default location for this file is in the "iTunes " folder in the "Music" folder.  the file appears in the proper directory. any ideas?

    i have unistalled and reinstalled iTunes without success.  itunes was working great the day before this occurred.
    thanks

    Anyone can help to advice how to solve this issue ?

  • I keep getting the error message; The volume for "sc0003166b.jpg" cannot be found.

    Need help this is slowing the laptop down

    Are you running a Managed or a Referenced Library?
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

  • When trying to udate iTunes on my PC, I recieve the error message "The older version of iTunes cannot be removed"  How do I correct this error and not lose all the music I have in iTunes?

    When trying to update my version of iTunes on my PC with Windows 7,  I receive the error message "The older version of iTunes cannot be romoved".  How do I correct this problem without losing all the music that I have in iTunes on my PC?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • My windows pc is showing an error message "The file iturnes library itl cannot be read"

    My windows pc is showing an error message "The file iturnes library itl cannot be read because it was created by a newer version of itunes".  I have not downgraded my itunes or done anything with  it other than follow standard download instructions .I have an ipad one and iphone 3g, neither work now help?

    The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the inst

    I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes.  I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.

    Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.

  • TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

    I cannot open itunes.  Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
    What do I need to do so I dont lose all my loaded music, etc.?
    Thanks

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • HT2497 I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable.  The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning

    I just purchased the 2TB TC and set it up on bridge mode to my att verse which is connected via ethernet cable.  The TC is continually blinking amber and an error message states that a wireless network cannot be found but the uverse is functioning great.  The network name I assigned to the TC is also not appearing among available networks.  How do I remedy this, please?

    What OS on the computer you are using to setup the TC?
    Did you turn on ipv6 for wireless to link-local... this is essential for network access now??
    Try power cycling the network.. start up in correct order.. uverse.. 2min wait.. TC.. 2min wait.. computer.
    No luck factory reset and start over. Use ethernet cable as well to the computer to help it.
    No luck I can show you manual method.

  • Error Message - "The Ipod Administrator's Ipod cannot be sync'd...etc"

    Recently, I downloaded one ITunes U course to my computer. When I connect my Ipod and try to sync to add this course to my Ipod, I get the following error message "The Ipod Administrator's Ipod cannot be sync'd The required disk cannot be found". I tried to uncheck my other playlists and just add this one this course to the Ipod, but I get the same message.

    On your Mac... Click on the Apple icon.. Top left in Finder...
     > About this Mac > Version...what does it say?

Maybe you are looking for

  • Varying Infinity monthly costs

    I responded to an advert on a web site asking BT to let me know when Infinity would be in my area a long time ago, 2 days ago I had a polite man from BT sales telling me that there was good news now that infinity was now in my area, and can I sign yo

  • Object or Bdoc type for project profile(PS)

    Hi, we have to integrate SAP PS and CRM marketing Campaign to transfer the cost of the campaign. In CRM we have a node where we assign the Project profile to the Logical client in CRM in SPRO. We need to know is there a separate object or BDOC type f

  • ITunes idea of ATV resolution different to others?

    I made a little HD movie (to test the iPhone 4S) in FCP X. When I "shared" it to Apple TV, it produced a video of 1280 x 720, which should be what ATV can handle, or so I thought (and so did FCP X!). However, iTunes wouldn't sync it, saying it couldn

  • Need to rename files parsing date formats in the filename [SOLVED]

    Godaddy changed the naming scheme of their server logs again.  I need some perl or something magic that will convert format A to format B.  Doing this is bash is going to be painful so I'm hoping some of your perl or python ninjas out there could hel

  • When i restart the weblogic server 9.2,all messages in Topic get cleared

    Hi,           When i restart the weblogic server 9.2,all messages in Topic get cleared for inactive dudrable subscribers.           Please advise what the issue here.           Thanks.