Error Message - "The Ipod Administrator's Ipod cannot be sync'd...etc"

Recently, I downloaded one ITunes U course to my computer. When I connect my Ipod and try to sync to add this course to my Ipod, I get the following error message "The Ipod Administrator's Ipod cannot be sync'd The required disk cannot be found". I tried to uncheck my other playlists and just add this one this course to the Ipod, but I get the same message.

On your Mac... Click on the Apple icon.. Top left in Finder...
 > About this Mac > Version...what does it say?

Similar Messages

  • When trying to udate iTunes on my PC, I recieve the error message "The older version of iTunes cannot be removed"  How do I correct this error and not lose all the music I have in iTunes?

    When trying to update my version of iTunes on my PC with Windows 7,  I receive the error message "The older version of iTunes cannot be romoved".  How do I correct this problem without losing all the music that I have in iTunes on my PC?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • My windows pc is showing an error message "The file iturnes library itl cannot be read"

    My windows pc is showing an error message "The file iturnes library itl cannot be read because it was created by a newer version of itunes".  I have not downgraded my itunes or done anything with  it other than follow standard download instructions .I have an ipad one and iphone 3g, neither work now help?

    The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

    I cannot open itunes.  Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
    What do I need to do so I dont lose all my loaded music, etc.?
    Thanks

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • I can't open my Itunes keep receiving error message- The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder

    I can't open my Itunes keep receiving error message- The iTunes Library.itl file  cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. I have even tried removing and reinstalling iTunes and it still does work because I continue to receive this error message. Please Help!

    Anyone can help to advice how to solve this issue ?

  • Trying to Transfer iTunes to a New computer, but I get the error message The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes --- HELP!

    Trying to Transfer iTunes to a New computer, but I get the error message The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes --- HELP

    Did you downgrade iTunes? What version is listed in Help> About iTunes?
    If you don't have iTunes 10.5.2, download it from here -> http://www.apple.com/itunes/download/
    If you have iTunes 10.5.2, try re-creating your iTunes library.

  • Cannot open iTunes-receiving error message "The  file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" How do I correct this and access my iTunes?

    I am not able to open my iTunes on my HP pavilion dv7-3173nr entertainment notebook: I receive error message: The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".    How can I correct this so that I can open my iTunes on my notebook?? dorothy278

    The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • Error Message: "The file 'iTunes Library.itl" cannot be read..."

    I'm trying to install iTunes on my machine and am getting this error message:
    "The file 'iTunes Library.itl" cannot be read because it was created by a newer version of iTunes."
    Does anyone know why? How can I fix this?

    In order to play m4p files, you must authorise your new PC. iTunes should prompt you to do this if you try to play an m4p file on an unauthorised PC.
    Apple has a strict download once policy, so you cannot re-download files that you have already downloaded.
    The simplest way to get you files off the external drive is to add the folder containing your music to iTunes with File>>Add folder to library. You need to ensure that "Copy to itunes music folder when adding to library" is checked on the advanced tab of Preferences.
    Doing it this way is easy but you lose counts and ratings etc. If you want to recover these, there are two possibilities.
    If you had your iTunes folder containing the the iTunes Library files on the external drive, You can simply connect to it by doing a shift key start.
    Hold down the shift key and start iTunes. Keep holding the shift key until you are promoted to choose a library. Navigate to the iTunes folder on the external drive and choose iTunes Library.itl.
    But I suspect that you had your iTunes folder with lirbary files on your old PC. Recovering the library data is more complicated and I will need more information about your old set up if you want to attempt it.

  • I get the error message: The System Administrator has set Policies to prevent this installation. What do I do?

    I get the error message: The System Administrator has set Policies to prevent this installation. What do I do?

    Have you read for possible solutions over in the "More Like This" thread over here?-----------------------> 

  • Trying to update iTunes, get error message "The older version of Bonjour cannot be removed" How do I remove it?

    Trying to update iTunes on Windows XP, get error message "The older version of Bonjour cannot be removed." I have removed several copies of the file Bonjour in a couple of different folders but the error message persists. What am I missing??

    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
    Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

  • TS2529 The error msg "The iPad "User's iPad" cannot be synced.  You do not have enough access privileges for this operation." appears when I connect my ipad to itunes.  How to resolve?

    The error msg "The iPad "User's iPad" cannot be synced.  You do not have enough access privileges for this operation." appears when I connect my ipad to itunes.  How to resolve?

    If you're running Windows, close iTunes, right-click on the iTunes icon and choose Run as Administrator, then try syncing again.

  • I keep getting the same message: The iPhone "..." cannot be synced. You do not have the privilege to make changes. I re-authorized the computer. The same thing?

    After sync I get at the last step always the same message: The iPhone "..." cannot be synced. You do not have the privilege to make changes. I re-authorized the computer but the same is going on.
    Anyone solved this issue?

    Numerous reports of this issue this morning, watch the otehr threads, you may find the answer

  • Error message: The older version of iTunes cannot be removed. Contact your technical support gropu

    When I try to update my tTunes store I get the message, "The older version of iTunes cannot be removed. Contact your technical support group."

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Error Message::: The volume for "CIMG0010.JPG" cannot be found.

    When I import to iphoto, I get this message:
    The volume for “CIMG0010.JPG” cannot be found.
    Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.
    I have to press Cancel each time to resume importing.
    Anyone have same problem?
    Thx for your help.
    Happy Holidays!
    Ms. MiniMac

    I too had this problem but found a very simple solution*. No rebuild needed.
    For anyone else who runs into this problem here is what happened to me, and what I did about it (for reference):
    I checked to make sure all software was updated, I tried different memory cards, I tried reformatting cards and used a card reader and tried straight from my camera (Canon 40D). I was downloading over 250 photos and after sitting there hitting 'Cancel' on each photo TWICE my photos finally loaded... or so I thought. When I went to open them, only the thumbnails were there! Argh!
    Thankfully I didn't delete the memory card, and this time I tried downloading to a new folder on the Desktop and then importing to iPhoto. I got the same error. I tried locating each photo with the 'Find Photo' button and this opened the correct folder and after I scrolled down it had even highlighted the correct file. Unfortunately this did not work.
    I tried a photo at the beginning, middle and end of the shoot to see if the memory card was somehow corrupt. Same problem with each. Eventually I did load my photos but again, only after I hit cancel for each one of the 250 photos. Interesting that after I hit 'cancel' it would download the photo.
    The 'duplicate image' window came up for the 3 images I had randomly selected earlier, so I didn't think it could have been a naming problem. After all, I have been using the same camera for a while with sequential numbering enabled.
    After reading Terence's reply (thank you) I was even more flustered that I would have to rebuild a database that I thought I was careful creating and backing up. Backing up... That was it!
    I have over 40 gigs of photos on a USB drive from before I owned my Mac. I choose to use iPhoto to catalog the files but did not want to load them all on to my laptop and clog up useful memory.
    It occurred to me that as Terence had suggested iPhoto may be trying to double check the new images against old ones, but the old ones can't be found. Even though the files were on completely different drives.
    After simply plugging in my USB drive the photos downloaded to my MacBook immediately. Just to be clear, the photos were not using the same names as old ones nor were they being written to the USB drive; but iPhoto needed to have that USB drive plugged in to download photos to the laptop hard drive.
    This is an easy fix, and avoids database rebuilding, but I am worried about when I go traveling etc. and need to download photos without my USB drive handy...

  • HT1926 After successfully upgrading my Apple software, I was able to download iTunes.  But I cannot start it up, instead I get this error message, "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes."  What ne

    I needed to upgrade my iTunes to register and sync a iPhone 5c.  I upgraded by Apple Software and finally was able to download the upgraded iTunes.  When I try to start iTunes I get this message, "The file iTunes Library.itl" cannot be read because it was created by a newer version of iTunes.  How can I repair this?

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • Itunes error message - the itunes library.itl file cannot be found or created

    My itunes was working yesterday but today when i open it i get an error message saying "the itunes library.itl file cannot be found or created. the default location for this file in in the itunes folder in the music folder."
    I have tried to reinstall itunes but still getting the same error when clicking on itunes
    Please can you help?

    Hold down the Shift key while trying to launch iTunes. You should see a dialog box asking you to Choose or Create a library. Click "Choose library"
    Browse to the default location of your iTunes Library.itl file:
    Windows XP: \Documents and Settings\username\My Documents\My Music\iTunes\
    Windows Vista: \Users\username\Music\iTunes\
    Windows 7: \Users\username\My Music\iTunes\
    ... and doubleclick the file.
    Does your iTunes open for you now?

Maybe you are looking for

  • PROBLEM IN EXCISE ( CIN)MM

    Dear cons I have been facing a problem since long.In capital goods transfer of credit (t-code- J2I8) we can utilize 50% of BED in this year & rest 50% in other year. Then how can we utilize 50% of AED in this year & rest in other year. What is the pr

  • Problem with JDBC resultset

    Hello everyone: I'm using JDBC to connect to SQL Server, normally after executeQuery();, it should return me a opened BaseResultSet in order that i can read datas by stream(next(), getColumn(),etc...) but sometimes it returns a BaseResultSet closed.

  • Timestamp in stderr.log file

    I have WLS 8.1 setup on Win2k servers. Unlike all the other log files, the stderr.log file does not contain the timestamp in it which makes it very difficult to know at what time a particular error occured. Where can I set this up ? Kindly let me kno

  • Report for Actual GR posted

    Hi Gurus Is there any business content infoprovider / report available in BI, which will give the actual GR qty (mvmt types 101,102 etc)  similar to MB51 in ECC? Is there any BC provider which stores MSEG data? regds KS

  • How to install Open-SSL tool kit for Key conversion

    Hi Expert, Can you please suggest how do i install Open-SSL tool kit for Key conversion . I need this for creating public and private keys for a key based SFTP connection.