Error message:  The operation couldn't be completed. (OSStatus error -43.)

I've been using TeleChart 2000 for a couple of weeks with no problem.  Then over the weekend it disappeared from my dock and wouldn't stay in the dock even though I selected "keep in dock."  At least I could still open it by going to the "downloads" folder.  Now today, when I tried to open it after using it earlier in the day, I got this message:  The operation couldn’t be completed. (OSStatus error -43.)
Anyone know how to fix this?
MJ

I took a quick look at http://www.welovemacs.com/whdoalltherc.html which list many error codes, Error 43 appears to be a file not found error.

Similar Messages

  • When creating a slideshow I get an error message when it's almost done:  the operation couldn't be completed- osstatus error 9459

    When creating a slideshow I get an error message when it's almost done:  the operation couldn't be completed- osstatus error 9459.  Help!

    but I tried that earlier and the same thing happened.
    Why not give us a list of all the things you've tried so we don;t waste your time - and ours - making suggestions that you know won't work?
    Regards
    TD

  • HT1222 Update to Safari 6.0.2 gives error message "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)"

    Every time I try an update I keep getting the error message
    "The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102)."
    Once I get this error message and try to update again, I get told there are no updates. I have to cancel the first attempted update and close all message windows before it lets me try again, and guess what, same error as above.
    Is anyone else having this problem, or know how to fix it.
    Not sure at the moment if this is an Apple related problem or a problem with my machine, but everything else worked ok, including an earlier update to iPhoto

    Use this link instead:
    http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg

  • Error message: The operation couldn't be completed. (NSURLErrorDomain error -1012.)

    I receive an alert from ITunes that there is an update available.  When I go to the updates in ITunes I receive the following error message:
    The operation couldn’t be completed. (NSURLErrorDomain error -1012.).

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Iphoto will not play H.264 video: error message "The operation couldn't be completed. (OSStatus error -101.)" Any suggestions to fix?

    Hi, I am on iphoto 11 version 9.2, Mac OS 10.7.5 using a macbook Pro 2.8Ghz Intel.  All of a sudden I cannot play video (H.264) on iphoto.  I get the message "The operation couldn’t be completed. (OSStatus error -101.)".  I rebuilt the iphoto database and videos played once, since then, they will not play and I continue to get the error message, even if I rebuild the database. 
    Any thoughts or helpful suggestions from anyone gratefully received.

    Hi Terence,
    Thank you for your help.
    My saved iphoto library is in iphoto 09 and I have now iphoto 11 in my iMac as I upgraded from OS X Lion Mountain to OS X Mavericks.
    Thanks
    Charles

  • Can anyone help with this error message (The operation couldn't be completed. (NSURLErrorDomain error -(1012.) (-1012)

    The most recent update I have in the App Store is an OSX update but I receive this error message when I select the update button. (The operation couldn’t be completed. NSURLErrorDomain error -1012. -1012.  Can anyone tell me why or how to delete this update in the que from the app center and try again? Any help would be greatly appreciated.  Thanks.

    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • Trying to system software but get following error message "The operation couldn't be completed. (NSURLErrorDomain error -1012.)(-1012)

    Would like to update my system software but I get this message everytime:
    The operation couldn’t be completed. (NSURLErrorDomain error -1012.)(-1012)
    Any ideas on what this is?

    There seems to be a trend here. 
    The operation couldn’t be completed. (NSURLErrorDomain error -1100.)
    Any help Apple?  I was having issues with other programs and figured I would update just in case. 
    Is an update for Mountain Lion coming out soon to fix the bugs I've been having?  I have a brand new MBP (3 weeks old) and have had nothing but problems with Mountain Lion.

  • Why can't I import my phots's fom my digital camera? I get this error message The operation couldn't be completed. (com.apple.ImageCaptureCore error -9912.)

    The operation couldn’t be completed. (com.apple.ImageCaptureCore error -9912.)

    The com.apple.ImageCaptureCore error may be a system issue.  Try applying this updaters:
    OS X Lion Update 10.7.5 (Client Combo)
    OS X Lion 10.7.5 Supplemental Update
    and then try again.  Also try reformatting the memory card with the camera, take some test shots and try importing those photos.  This is to rule out a card issue.

  • Can't burn Blu-ray disk image because get error message, "The operation couldn't be completed. (DSPPublishing error -1012.) What does it mean?

    There was an error creating your disk image. The operation couldn't be completed. (DSPPublishing error -1012)

    I don't have a background image. I called Apple and they had no idea what that error number meant. I deleted preferences for FCPX still didn't work, then delted all preferences and set up a new user. It now works. Apple has no idea what is going on.

  • The operation couldn't be completed, OSStatus error -1

    After leaving the Aperture app open for a day I get the above mentioned dialog box message and I need to force quit it. Once I started clicking on "OK" and it took 98 clicks to get the dialog boxes to finally disapear. Usually I don't have that much time. Internet works fine and Facebook works fine. Aperture version 3.4.3
    What's going on?

    The OSStatus error -1 may indicate a network problem, even if your internet is working fine now. You may see these alert boxes, if Aperture cannot connect to Flickr or Facebook, when it awakes from sleep.
    I'd disable the option "automatically check for newly published albums" in the "Web" preferences of Aperture.
    This will prevent Aperture from trying to connect to Facebook, each time it wakes up.

  • HT5717 Every time I try to download this update I get an error message: "The operation couldn't be completed. (NSURLErrorDomain error -1012.)(-1012)"

    What can I do to download and install it?
    Also:
    Everytime I click on Download after iTunes opens up a the window New iTunes Version Available (11.1.3) it fails to appear in the software list.
    What is that all about?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Hello!  I am having trouble deleting any emails on my Mac OS X.  I keep getting this error message "this operation couldn't be completed.  Input/Output err."  Any suggestions?  I have rebooted.

    Hello,
    I have a Mac OS X.  I just had some memory installed and had to update my Mail and had a ton of old mail still there.  Since then, my mail has crawled so slow and I have tried to delete my old emails and I keep getting this error message "the operation couldn't be completed.  Input/Output error".  Any suggestions? 
    Thanks!

    The next time you have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • HT1040 When I try to preview the book I get the message the operation couldn't be completed. (com.apple.chameleon.pdfGenerate error 1.)

    When I try to preview the book I get the message the operation couldn’t be completed. (com.apple.chameleon.pdfGenerate error 1)

    No - you there is nothing more to explain - you boot into safe mode as described in the link in my post and try assembling the book while in safe mode - nothing more to it
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    LN

  • When trying to install updates, I get this message:The operation couldn't be completed. (NSURLErrorDomain error -1102.)(102). What does that mean?

    When trying to install updates, I get this message:The operation couldn’t be completed. (NSURLErrorDomain error -1102.)(102). What does that mean?

    It appears Apple’s download servers are ‘overwhelmed’ today.  I couldn’t download the newest iTunes update or IOS 7 and there are a lot of discussions today about not being able to download. One poster said they had chatted with App Store support who confirmed the problem.
    What updates? Here is a link for iTunes which worked for me.
    iiTunes 11.1.0

  • Unable to sign in with AppleID - "The operation couldn't be completed (CSIdentityErrorDomain error - 11.)"

    Unable to sign in with AppleID - "The operation couldn't be completed (CSIdentityErrorDomain error - 11.)"
    Within the System Preferences, Users and Groups - when we attempt to sign into the notebook using any AppleID - we receive the following error message:
    Unable to sign in with AppleID - "The operation couldn't be completed (CSIdentityErrorDomain error - 11.)"
    We have a Macbook Pro, MAC OS X Lion 10.7
    This occurs whilst using any AppleID - we have tried two separate accounts.
    I have created a new user profile, with administrator access, same fault occurs.
    We can log in to iTunes on the notebook, the AppleID account registers and works OK.
    No related articles with common Google search results.
    I'm hoping to avoid a re install of the operating system if possible.
    Many thanks,
    Tim

    Has anyone else possibly heard of this particular error? I'm really hoping to seek some support suggestions for this as it is occurring to one of our top line managers. Much appreciated.

Maybe you are looking for

  • How do I copy photos from an iPhone 4S to my PC?

    Platform:  iPhone 4S, IOS 6.0.1 I wish to transfer all photos stored on my iPhone to my PC.  Whether I use a Windows-based wizard, Adobe Photoshop, or Windows Explorer to read and copy files and folders, I can only access a small protion of the total

  • Oracle 9 and PHP under Redhat 9

    Hi, I am planning to migrate my current web server from redhat 7.x to 9 and I am currently evaluating what may go wrong or need special attention before I actually replace it. After searching the archives and other lists I still have a question : a)

  • Combine Accounts from different Generations into a single Table Prompt

    We are on OBIEE 11.1.1.6.2 and using an ASO (11.1.2.1) cube as a datasource. I wish to make a drop down menu of only ten accounts in OBIEE. These ten accounts do not all belong in the same generation. The desired Accounts are from Gen6, Gen5 and Gen4

  • IOS 8.0.2 Problems - iPhone 6 Plus

    Getting following issues - have restored phone twice, and have current iTunes version -as FYI, phone didnt restore smoothly, took 3 times to get it to work completely -Safari pages freezing, links become inactive in web pages after short period of ti

  • Prcessing KEU5 transaction for multilple controlling areas in parallel

    Hi, I have executed KUE5 transaction with an assessment cycle for a controlling area and when i try to execute the same transaction with an assessment cycle for another controlling area in parallel, there is an error message 'Cycle YOCETEST2 01.02.20