Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

Hello all,
I can't open a PP project without this error message appearing:
"The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
1. How to fix this?
2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
Other older PP projects of mine open and work fine.
Premiere Pro CC 8.2.0
Media Encoder CC 8.2.0.54
OSX 10.10.2
Any help would be greatly appreciated.
Duncan.

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

Similar Messages

I wanted to know how to unlock my iphone, since I had to restore it and when it restarted, it appeared this message: "The SIM card que you currently have installed in this iphone is from a carrier that is not supported under the Currently actuvation polic

I wanted to know how to unlock my iphone, since I had to restore it and when it restarted, it appeared this message: "The SIM card que you currently have installed in this iphone is from a carrier that is not supported under the Currently actuvation policy that is assigned by the server activion. this is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request que this iphone be unlocked by your carrier. Please contact Apple for more information. "
I need help, I use my phone for everything enclusive to work. I appreciate if you can help. I'm from Brazil. My name and giullia.

Did you purchase this device from Apple or an authorized reseller? It sounds as if you had a device that was jailbroken/hacked to operate on your carrier. Upon updating the iOS, it is now locked back to the original carrier the device was locked to.
Only the carrier the device is locked to can authorize an unlock. You will need to make contact with that carrier and see if they provide unlocking services, and if they do, if you qualify for an unlock. Otherwise, you are out of luck. One that carrier can take care of the unlocking.

The HP software required for Scan to Computer could not be located on this computer.

No scanning from the HP front panel. Get this from the HP utilities "The HP software required for Scan to Computer could not be located on this computer. Please download and install the latest HP recommended software for your device from http://www.hp.com/support, and then try again." I've downloaded, deleted and downloaded the drivers and i tried to let my mac get drivers from the printer. I have to go to the web do scan my flat bed.

Hello @wfreker,
Welcome back to the HP Support Forums! I understand you are not able to use the Scan to Computer feature with your HP Officejet 8625. Please follow the steps listed below:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software. Click on the link below to begin the download and follow the on screen instructions:
HP Officejet Pro 8620 e-All-in-One Printer series Full Feature Software and Drivers
I hope this helps, please let me know the outcome!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HT201303 I have updated my IOS after that the message was showing that Could not activate iphone what i will do? for activate

I Have updated my ios after that the message was showing that "could not active iPhone"
please help me
how to activate my iPhone

It's probably because the phone was jailbroken or hacked to unlock it. The update has bricked it.

Error Message on Windows Media Player 'ONE OR MORE ARGUEMENTS NOT ALLOWED'

THIS FEELS LIKE THE COMMERICAL ...
I'm trying to use Windows Media Player on my Mac Intel -- brand new.
I keep getting this error message -- no kidding!
"One or more arguements, not allowed"
Intel Mac Mini 1.66Mhz Mac OS X (10.4.9) 2gb RAM Installed

WMP for Mac has been discontinued and is not written for Intel Macs.
Instead you should use the free Flip4Mac QuickTime WM plugin available free from Flip4Mac.com
If you choose to stick with WMP, you'll get better response if you use a forum dedicated to Microsoft's Mac products such as <http://groups-beta.google.com/group/microsoft.public.mac.office> rather than an Apple forum.
Be sure to search the forum first in case someone has already had a similar question answered. You'll get your answer faster this way. Post your question in the forum if you don't find anything that helps you.

When I try to install itunes i get this pop up "procedure entry point ADadPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll". please help if anyone has seen this before.

Anyone get this pop up?

See iTunes launch errors caused by iAdCore.dll.
Review the rest of the user tip if required.
tt2

I get an error message saying that the original file could not be located on about half the songs in my library. Not all but half.

I'm unable to play approx. half the songs in my library. I get an error message saying that the original file could not be located. I am asked if I want to locate the file, I click locate and get a screen with a list of confusing looking files and nothing seems to solve the problem. As is probably apparent by now I am not particularly computer literate. I don't understand why this problem occurs on only half my library.

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

The song...could not be used because the original file could not be located

I just used Garageband this past Sunday, no problem...I open it up tonight and I get this message:
"The song...could not be used because the original file could not be located."
I click the OK button and it comes up with another song title, and I have clicked it 20 or 30 times already and it keeps coming up and I can't access anything else and it is frustrating!
Anyone know how to stop the madness?!
iMac 2.7 GHz Intel Core i5, 8 GB RAM, 1 TB HD, OS X 10.9.3
Garageband 10.0.2

"The song...could not be used because the original file could not be located."
GarageBAnd cannot find the recorded media or imported audio files, that should be in the Media folder inside your project.
Crtl-click the GarageBand icon in the Dock and use Force-quit to quit your current project.
Then ctrl-click the .band file of your current project and select "Show package contents." open the Media folder inside and check if all recorded media and imported audio files are there and you can play them.
Have you moved your project or has it been transferred by mail?
If the media are missing or do not play, there is not much you can do. If all media are there, repair the permissions of the project. If it is on an external drive, move it to your system drive and try there.
If you cannot rescue the project, copy the media file out of the project, so you can use the recordings to recreate the song.You can launch GarageBand into the file "recent songs" panel to create a new project or to pick a recent project, by holding down the alt/options key while double-clicking the GarageBand icon.

Firefox.exe message . "The procecedure entry point sqlite3_ob_status could not be located in the dynamic link library mozsqlite3.dll" - appears immediately and blocks further use of the equipment. How do I solve the problem?

Message
"Firefox.exe. The procedure entry point sqlite3_ob_status could not be located in the dynamic link library mozsqlite.dll"
Appears as soon as I try to use Firefox. Kit in Toshiba Net book.
No problems of this type before.

Thank you. I'm going to investigate saving my itunes library to the icloud and then re-trying the Stellar Phoenix recovery now the error messages have gone. If the Stellar doesn't work then I will try the advice in your link. I really appreicate the help you've given me - at least I have my itunes library back! I'm kind of resigned to re-loading my CDs back on - something to keep my busy in the winter months!
I'll let you know how I get on, but it will probably be a few days.I'm not very technical so I have to wait for my husband to get in from work to help me with this side of things. He's been busy working on the Olympics, so I he hasn't had much spare time for a while!
Michelle

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8)

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now. Mail will no longer download on the MacBook Pro and keeps asking for my password.

Mail should still be usable with your machine - but you'll need to update the settings to conform to the requirements of your system. Check with your ISP (like ATT, etc.) for the settings that will work with your Mail. Once you've updated this, you should be able to email like before.
For example, my ISP required that I go to Mail Preferences/Accounts and make sure the details conform to your email settings.
I have no idea of what your ISP is or what the settings might be, but this is likely the source of the problem.

When I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP

when I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP in English
== This happened ==
Every time Firefox opened
== start mozila firefox

This issue can be caused by a problem with the file c:\windows\system32\dwmapi.dll
The file dwmapi.dll is a Vista file and should not be present in Windows XP.
See also [tiki-view_forum_thread.php?forumId=1&comments_parentId=417674]

The song "---" could not be used because the original file could not be located. Would you like to locate it?

I have 2 users on my computer and it is causing an error message telling me the original file could not be located. How can I fix this?

Probably not every one, but you will have to do it several times. Right click on the name of the song, show in window's explorer and when it can't it should give you a dialogue to find the song.
Once it finds one it'll offer to find more and you can locate stuff that way.

My iTunes says: "The song ".............." could not be used because the original file could not be found. Would you like to locate it?" How do I solve this ?

My iTunes says: "The song “..............” could not be used because the original file could not be found. Would you like to locate it?" How do I solve this ?

That means iTunes cannot find the music file associated with the listing in its database. The first thing to do is simply say "yes" and then try to find the file it should be. If there are many entries like this, did you rename or move any files or folders with media? Also run disk utility and check your drive isn't corrupted and losing files left, right and center.

FCP X can't import iTunes music - says "The song "Warp Factor" could not be used because the original file could not be located."

FCP X can't import iTunes music - says "The song "XXXXX" could not be used because the original file could not be located."
I saw the reply that iTunes was probably moved. I restored it from Time Machine when my hard drive crashed. How do I fix it to import into FCP X?

I figured it out by going into iTunes and clicking on the Library link under File. This bring up a box that allows the music files to be reconnected to the iTunes music folder.
FCP X now sees the music and it can be placed into the project timeline.

I just upgraded to the latest edition of firefox for mac and I am getting this error message Textarea Backup] Existing text detected in 'add_comment_text', overwrite with this backup how can I get it to go away?

I updated to Firefox 8.0 for Mac and when ever I try to log on to Facebook I get this error message Textarea Backup] Existing text detected in 'add_comment_text', overwrite with this backup? and then it says yes and gives you the choice of either canceling or ok and it doesn't go away when you click either button...What is going on?

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

Similar Messages

Maybe you are looking for