Error Message: The syntax of the value for prompt 'p_phone_num' is incorrect. Please correct the syntax and try again.
Post Author: helpwithcr
CA Forum: General
" The syntax of the value for prompt 'p_phone_number' is incorrect. Please correct the syntax and try again."
I am getthing this error while I tried to pass the value from an oracle package to the web when the the crystal report viewer kicks in.
I found the source of the error. Its just a paranthesis that I used with the phone number inside the function.... The function looks like this
function phone_number
return varchar2
is
begin
return '(123) 456 - 789';
end phone_number;
I really dont want that paranthesis to go. Its the format that everyone wanted. But they dont want that to be static on the report also
Please help
Thanks
helpWithCr
Sir, you are a legend!!!
Many thanks for putting me on the right track...
Here's where I went wrong and how I fixed it.
First I installed the Azure Pack: MySQL Extension on the MySQL server.
This was wrong, it needs to be installed on the WAP server/s.
So I installed the extension on the WAP server and it still didn't work.
So I uninstalled the extension from the MySQL server and it still didn't work.
So I also installed the MySQL Connector/Net on the WAP server and it worked.
This eventually fixed it.
What I will say is that in the documentation it doesn't mention installing the MySQL Connector/Net from the web platform installer on the WAP server (unless I have completely missed this)?
Thanks again :-)
Microsoft Partner
Similar Messages
-
Face time will not connect error message "Please check network conections and Try again" message appears but I'm connected to the internet?
Hey sergioo9,
Thanks for the question. Based on what you stated, it seems like you are having trouble signing into Messages on OSX. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario -
Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network. What gives?
Try disabling your firewall; both on your PC and the external Firewall/Router.
-
I'm trying to update to CC (2014) and keep getting this message: "Installation Failed. Installation encountered an error. Please restart your system and try again. (15) I've done the restart, same problem.
Help!Hi stijill2,
In case you are facing issues uninstalling the app's then please try manual cleanup of Adobe from your machine by following the below mentioned steps:
1. Navigate to Applications and trash all Adobe app's and Adobe folder.
2. Navigate to Applications/Utilities/ and trash Adobe Application Manager,Adobe Creative Cloud, Adobe Installer folder.
3. Go to Library/Application Support and trash Adobe.
4.Go to ~/Library/Application Support and trash Adobe.
Try installing the CC app's and let us know if still the error persists.
Regards,
Romit Sinha -
Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor ProHello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G -
When i want to ask the guaranty status of my apple wireless keyboard, i got an error: apple keyboard We're sorry, but this serial number is not valid. Please check your information and try again.
If you purchased the iPhone from Apple or an authorized Apple reseller,
contact them for assistance. If you purchased elsewhere, go back
to that retailer and get them to give you a new iPhone or your money
back.
If you have checked the serial number carefully and re-entered it
and that gave you the same error message, contact Apple if purchased
from Apple or authorized retailer; otherwise you have been scammed
and need to pursue the matter with the business you obtained the
iPhone from. -
When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
http://www.musicstudentsforhire.co.uk/musicians-samples.html
It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.
-
I've been building a site in Muse successfully until today when I get this error message in the browser, publishing to business catalyst as a test bed:
Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.
Clearing the cache has no effect and I have checked the assets and there are no error symbols. This happened after trying a google translate code in the <head> and a HTML snippet on the master template, I've since removed it but that the last action I took that I can think may have had an effect.
Viewing the source of the page in Safari hash;t helped other than it shows ALOT of html (including some elements i can;t relate to in my site design) and states there are three errors:
[Warning] Invalid CSS property declaration at: ; (index.html, line 1)
the site is Kingsdown Holiday Homes - Self Catering Chalet Rental at Kingsdown Park, Kent | Home
I started this site in Muse CC and then recently upgraded to Muse CC 2014, and I had install issues so deleted the original program (this then forced the download of the new version which was not automatically downloading even though CC notified me that an update was required.
Any information gratefully received.
Thanks,
AndrewSame problem here but it has nothing to do with a cellular connection.
Created the site http://www.blackdot.com in Muse 7.4.3 with no issues. Just updated the .muse file today to Muse CC 2014 and reloaded to our web server. Now I am getting the error "Some files on the server may be missing or incorrect." when viewing the site from the latest version of all browsers (Safari, Firefox, Chrome) on a Mac and all browsers on a PC (Safari, Firefox, Chrome, Explorer), also mobile Safari on an iPad.
My connection is wired broadband, not a mobile or wireless connection. I am not using the Muse "Upload to FTP host…" option and will not be using it. I am simply exporting as HTML and copying the files to my server. I have deleted all files from the web server and recopied the updated site with the same error result. This is the exact same procedure I used to load the initial site with the prior version of Muse.
It does not seem like there is an existing solution to this problem although many others are experiencing it. It looks like I will need to manually edit each page to remove the error message coding from the html files. Any tips on how to strip out the alert message from the html?
UPDATE
For anyone else experiencing this issue, I was able to edit the .html files for my site to remove the code responsible for this alert message. If you wish to edit your .html files you must make the same edit to every .html file in your site export including the top level "index.html" and all .html files inside the "tablet" and "phone" folders if you have them.
The coding to remove is at the bottom of each .html file:
(Muse.assets.outOfDate.length||Muse.assets.required.length)&&alert("Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.")
Make sure you do not remove any semicolons or braces {} when making this edit. Just remove the text shown above. You will obviously need to remake these edits if you export your site as HTML in the future. -
Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM) -
Pop up error message "something is wrong, please wait a moment and try again"
Currently have a razr Maxx HD. Over the last few days I have been getting an error message that will pop up on the screen that says, "something is wrong, please wait a moment and try again. If the problem persists, try logging in. If you hit retry it acts as if it is logging in and then gives you the same error message again. I have tried to shut down the phone and reboot, remove sim card and reload, empty cache on several apps. Nothing seems to work at this point. Becoming very frustrated!
Hi mbs44,
Let see why this pop up error comes on your device to ease the frustration! Sounds like you did all the normal steps to try and resolve the issue. Do you have any 3rd party apps that could be interfering with your login process? Are you able to login on a computer without any errors? Check your device to see if any app is interfering and try ending to reaccess and login to your account.
Thank you,
EdW_VZW
VZW Support
Follow us on Twitter @VZWSupport -
Why often after making updates appears: some files on the server may be missing or incorrect. Clear browser cache and try again.
Hi Gauray
I can see it well but someone how works at the congress it appears:
http://www.oeso.org/monaco_conference2015/endorsements.html
Do you have an updated to clear browser cache automatically in Adobe CC Muse?
If not, how can I prevent browser cache?
It is correct if I put in Page Properties for Home Master, in HTML for ha scritto:
Why often after making updates appears: some files on the server may be missing or incorrect. Clear browser cache and try again.
created by Gaurav Sharma in Help with using Adobe Muse CC - View the full discussion
Hi,
Could you please provide a URL of the site, so we can check it. Also, take a look to this thread, discussing the same
Some files on the server may be missing or incorrect
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6767913#6767913
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
When attempting to reply to or forward email, or to compose a new message in Outlook OWA I receive the following error message: "The window couldn’t be opened because your computer is low on memory. Please close some windows and try again." This
occurs even if the web application is the only window open.
My operating system is Windows 7.Hello,
According to the error message, it should be a Windows issue.
Try OWA and see if we can send/receive email properly. If OWA works fine, I suggest we post this question to Windows 7 Forum below:
http://social.technet.microsoft.com/Forums/en/category/w7itpro
Thanks,
Simon Wu
TechNet Community Support -
I installed viber on my iPhone 5s. After entering my number, it says:"
No Service
It seems to be a problem connecting to viber's service.please check your connection and try again"
Nevertheless I have connected to the internet.
Could you please help me?Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM) -
After Mac OS X 10.6.3 upgrade can't access Yahoo mail and repeatedly get message ""Sorry, we are over capacity. Please wait a moment and try again." Help, please.
Did you run all the software updates after the 10.6.3 update, especially this one which will bring you up to 10.6.8.
Mac OSX 10.6.8 V1.1 Combo update
Run software update, starting with the one above.
Then call your provider and ask them what is going on. They have probably changed POP to IMAP, 10.6.8 supports IMAP -
Hi
I have MacBook Air , yesterday I tried to use FaceTime but it won't even connect I keep getting this message " please check your network and try again later " my network work perfectly with everything . however FaceTime works on my iPad . can someone please help me with this problem .
thank youFaceTime, Game Center, Messages: Troubleshooting sign in issues
Maybe you are looking for
-
How do I open my imovie files from an external hard drive on a new computer
I'm trying to open my files from an external harddrive and the I don't know how to open it on another computer...the "event" files are confusing and I can't open a file of imovie 08....thanks!
-
I am unable to send images from Lightroom to PSCC2014 using the edit in command.
Since the latest update to CC2014, my LR edit in menu is not working; PS opens however no image appears. I cannot send a single image to CC2014. The merge to panorama is not working. The open as smart object is working. Open as layers is not working.
-
My alias has become unlinked from my Apple ID - can I relink?
Hi there, I haven't seen this issue addressed before- I appreciate any help! I have had an Apple ID from the way-back days when you didn't need it to be an email address. Let's say it was username:Irene, password: XX. I have an alias in Discussions t
-
Hi, I have a business process. This process is calling one webservice first. To call the second one the result from the first webservice and the input for the whole business process is needed. How can I create a mapping for this or solve this problem
-
Hi I followe these url and step to connect from Oracle to sqlserver http://www.dba-oracle.com/t_heterogeneous_database_connections_sql_server.htm SERVER X -- SYBASE SERVER Z -- ORACLE DATABASE Below is a series of steps that are needed to set up the