"Error Message" "There are currently no logon servers available to service the logon request"
Full Error Message
"(shared network name)is not accessible. you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permissions. There are currently no logon servers available to service the logon
request"
When trying to enter via "Map Network Drive" and click "Connect using different credentials", once entering the credentials, error
"The Network folder specified is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share."
As I am not particularly tech savvy, am not the one who set up this network drive, I dont want to interfere with it too much. I simply want to be able to get a basic understanding of the issue. We had set up a previous share, since deleted, that allowed
us to have a shared folder to work on documents between the US and Ireland. This new share has been working fine up until yesterday, when we got the above error messages when trying to access the share. Later in the day, it just worked again. Today, I go to
open the folder and the same error messages turned up, what could be going on??
Hi Tomas,
Did your computer join the domain? How did you access that shared resource?
Please turn off your firewall temporarily and type the correct UNC address to access for test:
\\servername\sharename \file_path
If it doesn't work, use the IP address of the remote server when you try to connect to the network share.
Meanwhile, please read this reference:
Resolving Network Issues-You Might Not Have Permission To Use This Network Resource
http://blogs.technet.com/b/danstolts/archive/2011/06/21/resolving-network-issues-you-might-not-have-permission-to-use-this-network-resource.aspx
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
We currently are running Windows 7 in our enterprise environment. Everything works as expected when the user tries to
change their network password via crtl+alt+del, change a password. We are now testing and trying to deploy Windows 8.1 to a test group and are running into an issue when any AD user tries to change their network password. The user can logon to the
PC just fine when the PC is on the domain, however as soon as they go to change their password they are getting the error "There are currently no logon servers available to service the logon request". The end result is that the user can not change
their password. We tried this via connected to the dock with a network cable, on corporate wireless, with a Windows 8.1 machine completely patched over with all Microsoft patches, and a Windows 8.1 machine that is not patched and are running into the same
issue. Has anyone ran into this? Is there something that has to be changed on the infrastructure side?Hi,
Please check the following KB:
Error message when you try to log on to a Windows Server 2008-based RODC: "There are currently no logon servers available to service the logon request"
http://support.microsoft.com/kb/949048
To configure the Password Replication Policy for an RODC, a member of the Domain Admins group is required.
By default, RODC's do not cache any user or computer passwords, neither a user or computer will be able to authenticate. You can however specifiy that their passwords be cached either by including a group or specific user in the Password Replication Policy
on the RODC at the remote site.
RODC - Password Replication Policy and Password Cache Management
http://blogs.dirteam.com/blogs/paulbergson/archive/2010/09/22/rodc-password-replication-group-management.aspx
Password Replication Policy Administration
http://technet.microsoft.com/en-us/library/cc753470(v=ws.10).aspx
For further information about the Windows Server side, I suggest you ask Windows Server forum:
https://social.technet.microsoft.com/Forums/en-US/home?category=windowsserver
Karen Hu
TechNet Community Support -
There are currently no logon servers available to service the logon request
I am trying to recover from a catastrophic SBS 2008 disk failure.
This machine was a stand-alone Domain Controller, and as luck would (NOT!) have it, both disks in a RAID1 configuration failed in rapid succession. Therefore, all I have is server backups to work with.
I have tried many permutations to get this data restored and the domain functional again, but so far, no dice.
I have successfully restored the system disk data from the most recent backup, but when I go to boot the system, I get a reboot loop. When I tell it not to reboot on error, it gives me:
S c00002e2 Directory Services could not start because of the following error: A device attached to the system is not functioning. Error Status: 0xc0000001. Please shutdown this system and
reboot into Directory Services Restore mode, check the event log for more detailed information.
When I reboot into Directory Services Restore Mode, the system quickly says that AD is clean, but doesn't take me to a command prompt, it takes me to the login screen. When I try to log in as Domain admin, it says:
There are currently no logon servers available to service the logon request
And I'm stuck. Unless I can somehow find out what the local admin credentials are, I can't get in to the system.
I have removed the disk and put it in a Hard drive enclosure, so I can access the files.
At first, I had some complaints about the disk driver, so I found the correct driver version from Intel to circumvent that problem when doing the restore.
I can boot from the installation disk, but I can't use wbadmin from there in the restore mode.
Right now, I'm trying an earlier backup, but something tells me I might have some real trouble here. This has turned in to quite the mess.
I have also tried reinstalling the OS to a new RAID array, but am loath to try putting the backup on there for fear I will be taken back to square one.
Do I have to start from scratch and recreate the domain and rejoin all the computers to it, or do I have a better alternative?
I have actually restored a SBS 2008 stand-alone DC from backup before, but that was RAID 5, so slightly different. I seem to remember having some driver headaches with that, but I did overcome them by getting into recovery and replacing the driver files
on the disk. Tried that here, but still no luck.
HELP!!!!Hi
Please chek these articles and follow step by step procedures;
http://blogs.technet.com/b/sbs/archive/2010/06/11/how-to-perform-a-bare-metal-restore-on-small-business-server-2008.aspx
http://blogs.technet.com/b/sbs/archive/2011/03/31/how-to-perform-an-authoritative-system-state-restore-in-sbs-2008-2011-standard.aspx
https://technet.microsoft.com/en-us/library/cc771290(v=ws.10).aspx
also you need to directory services restore mode(DSRM) password for restore AD DS.if you dont know
check this article how to reset it;
https://support.microsoft.com/en-us/kb/322672?wa=wsignin1.0 -
Hi,
I already have a windows server 2003 working as a Primary Domain Controller (PDC) and now I created another windows server 2012 to work as an Additional Domain Controller (ADC).
- PDC is doing (Active directory domain services + DNS + DHCP)
- ADC is doing (Active directory domain services + DNS)
For testing purposes, I shutdown the PDC and let the ADC up and running. Now, Whenever I try to access a shared folder on any server in the domain, I got this message "\\x.x.x.x is not accessible. You might not have permission to use this network resource.
Contact the administrator of this server to find out if you have access permissions.
There are currently no logon servers available to service the logon request."
Actually, the replication of AD objects and DNS records between the PDC and ADC is done successfully. I also can resolve names using the ADC's DNS. Also, I can ping servers hosting the files I want to access.
Appreciate your help.The PDCe is required for a lot of services, to include DFS.
Turn the PDC back on and try again. If it's still not working, ensure the file server has the correct DNS entries on the NIC.
I think I see what you were trying to test. The issue is that not all DCs are equal. Yes, they hold the same information, but some DCs do extra work. That is why FSMOs exist.
Let me know how it goes.
- Chris Ream -
**Remember, if you find a post that is helpful, or is the answer, please mark it appropriately.** -
Error Message: "There is currently a high demand f...
Whenever I call my Skype number I get a recorded message saying "We're sorry. There is currently a high demand for this destination". This happens from my office phone, from my mobile phone, and from other places I have tried. If this is what my callers would get then there is no point in my giving out my number.
Please advise
Post transferred from unrelated thread to start its own new discussion.
Subject/title amended accordingly.I think that message is coming from your phone carrier(s) not from Skype and I think something is wrong
there's nothing special about a Skype Number
I would suggest that you ask your carrier why you get this intercept
if there's a problem with this particular Skype Number, you can always replace it with another (especially if not too many people are aware of your Skype Number)
Regards,
Neil -
My artwork meets the specifications though I have gotten error messages stating that 300x300, 600x600, and 1400x1400 are the proper format. I have tried all of these. I've only gotten the artwork error message a couple of times. The most common error message I receive is, as stated above, "We are currently experiencing technical difficulties. Please try again later." I have tried uploading the podcast from a different computer and on an different network. Have any of you had this same issue, been able to work through it?
Thank you for getting back to me so quickly. The RSS feed is http://www.lifeinnortheastohio.com/the-panel-scanners/rss.xml
-
when I am installing sql server 2012 I get the following message.
Windows 8.1
SQL Server 2012 sp1
I have searched for solutions but I could not installok, download SQL Server 2012 and want to install the steps precisely in the last
Redy to Install I get the following error message:
[Error Message] The required MSI package 'E:\x64\setup\..\..\1033_ENU_LP\x64\setup\.\..\..\redist\VisualStudioShell\64bitPrereq' doesn't exist.
[Details] Microsoft.SqlServer.Configuration.SetupExtension.RequiredPackageMissingForFeaturesException: The required MSI package 'E:\x64\setup\..\..\1033_ENU_LP\x64\setup\.\..\..\redist\VisualStudioShell\64bitPrereq' doesn't exist.
My SO is W8.1, mount the iso with the tool that comes by default OS w8
Hi Jupemen,
According to your message, the SQL Server media is a complete installation and it has not encountered any error when downloading. We need to verify if you run the setup.exe as administrator and you have a permission to read and write the folder of MSI package
via Administrator account. In some occasions, the required MSI package doesn't exists and it could indicate a registry problem, a virus or malware issue or even a hardware failure. If you need a copy of the MSI package, it's best to obtain it from its original,
legitimate source. For more information , see:
How To Fix Msi.dll Not Found or Missing Errors.
In addition, there is a detail about installing SQL Server 2012 on windows 8.1, you can review the following article.
http://www.c-sharpcorner.com/UploadFile/47548d/how-to-install-sql-server-2012-on-windows-8-1/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
OS X 10.4.1 Unable to print photos. Error message appears, " There were no themes located. Until at least one theme is installed this cannot be carried out." please advise.
Check out OT's post in this thread:
http://discussions.apple.com/thread.jspa?messageID=6394288�
Also, note his comments here:
http://discussions.apple.com/thread.jspa?messageID=6998840�
> Look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation.
Regards
TD -
Trying to process cube on server erroring with No Logon servers available
I am trying to deploy my cube on a remote server for the first time.
I used the deployment wizard to build an XMLA script which I successfully ran on the server.
The datasource is set up to use my network credentials to login. This works fine when I run the cube locally.
However after running the XMLA script and I try to process the cube, I get the error :
There are currently no logon servers available to service the logon request.
I don't know much about windows security, and am stumped as what to do next.
Not sure if I am doing anything right as this is my first BI project, is there a better way to deploy and update the cube?
Or recommended settings.
Any help would be much appreciated.
Thanks
JonHi,
Here are some troubleshooting steps. Take a look into the following screen.
In order for the cube to process, the data warehouse database used in Connection String (This is defined in cube's data source) should have data read access against the target Data Warehouse database. To troubleshoot this click on the Test Connection button.
It should return "Test Connection Succeeded" message. If the message is an error which means current windows log-in does not have access to the Data warehouse database. Normally in production environments there is a dedicated windows account to do
these kind of work.
1 - Create a windows User Account which has relevant access permissions.
2 - Grant permission to access the Data Warehouse database to that user (Read access would enough)
3 - In SSAS Server Add this account as Server Administrator. To do that follow the following screenshot.
4 - Once this is done browse the data source of the SSAS database (<Your SSAS Database>\Data Sources\<Your Data Source Name>) and click properties (This is also in the very first screenshot)
5 - Click on "Impersonation Info" under Security Settings (This is also in the very first screenshot)
6 - Out of four options in that screen choose "Use a specific Windows user name and password"
7 - Enter the User ID and password you created for this purpose and click OK.
8 - Perform the "Test Connection" procedure (mentioned in the very biging of the post) and you should be good now.
9 - Process the cube and you should be able to process it without any errors.
Best regards...
Chandima Lakmal Fonseka -
Issue accessing share from other forest. No logon servers available to serve your request.
Hello, gents!
We have two AD forests and external 2-way trust between them. About month ago I was able to reach share on fileserver from localdomain.com to remotedomai.com without any issues. Now when I am trying to do it I have an error
"\\servername\share is not available.You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
there are currently no logon server available to service the logon request".
I validated trusts - everything validating fine.
In the event log of remote server, I am trying to access I found this error EventID 4625 from Microsoft Windows Security:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: artem
Account Domain: localdomain
Failure Information:
Failure Reason: An Error occured during Logon.
Status: 0xc000005e
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ANOMDC1
Source Network Address: 172.20.0.10
Source Port: 53693
Detailed Authentication Information:
Logon Process: NtLmSsp
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
What would be the proper steps to troubleshoot it?See what is the status/substatus and see which number correspod to your system
Status and Sub Status Codes
Description (not checked against "Failure Reason:")
0xC0000064
user name does not exist
0xC000006A
user name is correct but the password is wrong
0xC0000234
user is currently locked out
0xC0000072
account is currently disabled
0xC000006F
user tried to logon outside his day of week or time of day restrictions
0xC0000070
workstation restriction
0xC0000193
account expiration
0xC0000071
expired password
0xC0000133
clocks between DC and other computer too far out of sync
0xC0000224
user is required to change password at next logon
0xC0000225
evidently a bug in Windows and not a risk
0xc000015b
The user has not been granted the requested logon type (aka logon right) at this machine
Regards
Milos -
Error Message :Valuation area 1000 not yet productive with material ledger
Dear Floks,
I need some clarification to get rid of this error message and move further.
While saving the PGI I am facing the follwoing error message: "Valuation area 1000 not yet productive with material ledger----
The material ledger has been activated for the valuation area but
material data has not yet been converted in theis valuation area."
Plese respond with the solutions ASAP.
Thanks in advance.
Regards
ANGKSHello Padmaja,
You will to check the following before activation the Val.area
1) OMX1: Check if ML is active against the plant IF NOT
2) Use tcode CKMSTART - Enter Val area - EXECUTE.
Regards,
Manoj Reddy -
theres an error saying "We are currently experiencing some issues, please try again later. If the problem persists, contact customer support." im trying to download photoshop on my ubuntu os
Make sure you have cookies enabled. If it continues to fail, try using a different browser.
-
There are currently no logon server
Hi, when a computer joins a domain, by the time that this user has been using the computer for sometime his/her credentials should be cached on the computer for offline access, right? But why some of our users experienced "There are currently no logon
server" error message. The only solution is for them to come back in the office to tap to the network but how about for remote users? Is there a backdoor we can set so that this user can access. We don't want to give the local administrator password since
we used this only for installations, etc.
Thanks
JeffHi, when a computer joins a domain, by the time that this user has been using the computer for
sometime his/her credentials should be cached on the computer for offline access, right?
Right if the user is not connected to the network and your DCs cannot be reached.
To make this work, you need to make sure that cached credentials are not disabled: http://www.itworld.com/article/2779749/windows/how-to-disable-credential-caching-on-client-computers.html
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
It sounds a lot like your phone was hacked or jailbroken to unlock it prior to your trying to update it.
If that is the case, it is nowpermanently bricked. -
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
tariqrehmani wrote:
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. ...
The iPhone 3G is Not Compatible with iOS 6...
It also appears that your phone may have been Hacked and / or Jailbroken...
If this is the case... you are out of luck... Because...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Why Jailbreak is Not Supported > http://support.apple.com/kb/HT3743
Maybe you are looking for
-
Can anyone help? I have bought an iMac but when I try to sync it with my iPad it says I need to update the iPad to version 10.6.3 or later yet when I try to update the iPad it says it has the latest update which is 6.1.3 how can I fix this so I can s
-
Help Migrating from OS 8.6 to Mac Mini
I wish to migrate to latest Mac Mini from my old, basic 9600 with OS 8.6 in the easiest and quickest way possible which is suitable for a novice on anything except my current system. Current system includes Viewsonic P815 monitor and HP LaserJet 5MP
-
Hi All, When we upload or create contents or post the messages in the discussion. The user name will be recorded. Is there any ways to record and show both name and IP address of user? Thanks, Anucha
-
How do I convert a Chinese simplified pdf file to a Word doc?
-
Creating tabs in web application designer 3.x
Hi, I working with a client how is only on 3.1 platfrom. They want to create a web template with mulitple queries in. For this I would like to split the queries into different tabs. The tab functionallity as standard, doesn't come until nw04s. Is the