Error message -' too many messages'

Hi,
Whenever I send an email, it seems to send ok, but then an error message appears saying 'too many messages' with error codes. I've noticed also that there are 'mail undelivered' returned emails which contain email addresses that I don't recognize - mostly these addresses end with suffix '.ru'.
Any ideas what's going on?
Thanks
Wayne

Change the password on you e-mail account '''NOW !'''
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
http://www.clamxav.com/ free malware scanner for Mac OS X
https://discussions.apple.com/docs/DOC-3291
Windows:
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Similar Messages

  • After Loading Lion I now get 5 windows w/ a graphic of a Red Stop sign with an ! mark and the following text message: "DAVE Networking  Dave kernel extensions could not be loaded! Error 71 - Too many levels of remote in path."

    After Loading Lion I now get 5 windows w/ a graphic of a Red Stop sign with an ! mark and the following text message:
    "DAVE Networking 
    Dave kernel extensions could not be loaded! Error
    71 - Too many levels of remote in path."
    I have uninstalled DAVE and used Clean App to remove trace elements of program, however I still get the message and am unable to eliminate the error messages.  When I click OK the message goes away briefly and then comes back up.
    Any solutions would be great.

    Dave,
    Thanks....What I did was load the free eval version of Dave 9.0 and then used the uninstaller which must have deleted the kernel giving me the problem. 
    Thanks for the response.
    Razor

  • Provider hosted app error message: The remote server returned an error: (429) Too Many Requests.

    Hi,
    I have a customer running a provider hosted app and in Sharepoint 2013. Things have been working fine but recently they keep experiencing an issue where the all the app parts on the page show the following error message. Does anyone have an idea what
    could be causing this problem and how I can fix it? The Sharepoint site and provider hosted app site are running on a Server 2008 R2 box with IIS 7.5.
    Server Error in '/Test.Sharepoint.App' Application.
    The remote server returned an error: (429) Too Many Requests.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.           
    Exception Details: System.Net.WebException: The remote server returned an error: (429) Too Many Requests.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [WebException: The remote server returned an error: (429) Too Many Requests.]
    System.Net.HttpWebRequest.GetResponse() +8527180
    Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() +58
    Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb) +975
    Test.Sharepoint.AppWeb.Pages.LatestAnnouncement.GetLatestAnnouncement(Boolean showFullText) +610
    Test.Sharepoint.AppWeb.Pages.LatestAnnouncement.Page_Load(Object sender, EventArgs e) +764
    System.Web.UI.Control.LoadRecursive() +71
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3178
    Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.18034
    Impreza Software Development

    Hi GuYumming,
    I have checked the Sharepoint site using Fiddler and my X-SharePointHealthScore stays consistently on 1, I have even refreshed the site and had the "(429) Too Many Requests" error happen right in front of me whilst Fiddler is running and when I look at the
    200 response for the Sharepoint site it is still showing "X-SharePointHealthScore: 1".
    I assume because of this I do not need to make any of the changes suggested in your article above?
    I have also been through the ULS logs and found the following 3 log entries that appear to relate to the issue but they do not really mean much to me so I am hoping that you can help:
    Begin CSOM Request ManagedThreadId=59, NativeThreadId=12476
    SPResourceTally(ClientServiceRequestDuration) value 1 + 150425 > 150000
    ResourceBudgetExceeded, sending throttled status code. Exception=Microsoft.SharePoint.SPResourceBudgetExceededException: ResourceBudgetExceeded     at Microsoft.SharePoint.SPResourceTally.Check(Int32 value)    
    at Microsoft.SharePoint.SPAggregateResourceTally.Check(SPResourceKind kind, Int32 value)     at Microsoft.SharePoint.Client.SPClientServiceHost.OnBeginRequest()
    Impreza Software Development

  • What does this mean? The mail server responded: Too many messages. Please check the message and try again.

    I use BT yahoo mail with Thunderbird 24.6.0 in the last few days i've started getting this message when sending messages:
    An error occurred while sending mail. The mail server responded: Too many messages. Please check the message and try again.
    Now sometimes the messages are sent anyway and sometimes not. If I re-send sometimes it works and sometimes not. I've contacted BT 'tech support' who tell me there is nothing wrong with them or their servers and as webmail works ok they won't help. I strongly suspect it IS a BT issue, Any clues to fix this?

    The message means BT are lying basically. I have just spent the best part of an hour on chasing what limits BT place on mail sending... the internet contains a void.
    The closest thing I can locate is a BT rep here https://community.bt.com/t5/Email/E-Mail-message-limit/m-p/1045228/highlight/true#M17523 refusing to identify what limits they impose but advising their switch to critical path has more stringent controls. AFAIK Critical path is ca mail software solution sold by OpenWave Messaging http://owmessaging.com/
    So your paying for a totally undefined service. Congratulations!

  • 421 4.4.5 Too many messages from this host last hour

    Hi, we are in a migration process from a Kerio system to Exchange 2013.
    Everything is working fine, except that we have been experiencing this error on the logs and the Exchange 2013 users are getting returned emails.
    The remote server is 10.10.10.85
    Remote Server at 10.10.10.85 (10.10.10.85) returned '400 4.4.7 Message delayed'
    19/12/13 7:21:57 p. m. - Remote Server at 10.10.10.85 (10.10.10.85) returned '451 4.4.0 Primary target IP address responded with: "421 4.4.5 Too many messages from this host last hour." Attempted failover to alternate host, but that did not succeed.
    Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 10.10.10.85:25'
    My question is, is Exchange rejecting the messages or is the other system telling Exchange to slow things a bit?

    To update this.
    We found out that the other email system was configured NOT to accept more than 100 messages per hour from same sending IP.
    Once we removed the configuration value from the other email system, all started working.

  • Too many messages

    I have a email java app that sends mail in a loop for all the email address that it has in a list, it's not multithreaded yet. What I am seeing is this exception:
    1. First it throws this error message:
    com.sun.mail.smtp.SMTPSendFailedException: 421 #4.x.2 Too many messages for this
    session
    at com.sun.mail.smtp.SMTPTransport.issueSendCommand(Unknown Source)
    at com.sun.mail.smtp.SMTPTransport.mailFrom(Unknown Source)
    at com.sun.mail.smtp.SMTPTransport.sendMessage(Unknown Source)
    2. When it comes to process next email address, it throws this error message:
    com.sun.mail.smtp.SMTPSendFailedException: [EOF]
    at com.sun.mail.smtp.SMTPTransport.issueSendCommand(Unknown Source)
    at com.sun.mail.smtp.SMTPTransport.mailFrom(Unknown Source)
    at com.sun.mail.smtp.SMTPTransport.sendMessage(Unknown Source)
    3. When it comes to process next email address that falls after the one in bullet # 2, it finally gives up and throws this message:
    javax.mail.MessagingException: Can't send command to SMTP host;
    nested exception is:
    java.net.SocketException: Broken pipe
    at com.sun.mail.smtp.SMTPTransport.sendCommand(Unknown Source)
    at com.sun.mail.smtp.SMTPTransport.sendCommand(Unknown Source)
    at com.sun.mail.smtp.SMTPTransport.issueSendCommand(Unknown Source)
    Everytime this happens, this is the pattern as I described above. I am just not getting why this should occur. I was planning to make this application multithreaded, but now I am not sure what it will do.

    Obviously your SMTP server is limiting the number
    of messages you can send in a single session (connection).
    If you control the SMTP server, you might want to change
    the limit. Otherwise, you'll need to change your code
    to disconnect occasionally and reconnect to send further
    messages.

  • How can i fix imessage when my friends send me too many messages and it wont load

    My friends sent me 92 messages on the same group message and iMessage won't load because there are too many messages. Is there any way I can fix it because I tried resetting all settings and it didn't work.

    What version of iPhoto? Assuming 09 or later...
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Mail slow down; too many messages?

    Mail (4.4) has slowed down a bunch here. I click on an unread message and it takes a good 5 seconds (or more) to show the message and any pics in it. (most of the time it seems to display the wrong message for a quick spell, then go and wait on the correct message)
    I do have 9 accounts (and 3 dead ones) Most IMAP and some POP. I do sync and also keep/move a bunch to the On My Mac section.
    Is there a way to find the total # of messages in Mail? (not just a selected folder)
    I might just go the mailSteward route and keep Apple Mail lean and mean.
    Message was edited by: Suds&Hops

    I wish I could offer a solution ... I'm posting because I'm also suffering from brutally slow search in Apple Mail. I have multiple mailboxes with lots of messages using IMAP and POP with Gmail but must it really take (literally) a minute to type something into the box and get results? Even more frustrating, typing into the box is slow ... each letter takes 5-10 seconds to apppear!
    I tried "vacuuming" my mailbox according to instructions I found online. That made it a little smaller but didn't help noticeably. My sense is that the indexing is screwed up or I simply have too many messages and it's choking on it.
    I'd love anyone's input! I'm a recent convert (back) to Mac OS and I'm just not sure how to begin fixing this problem.
    Message was edited by: jamiemex

  • Exporting a sequence and getting an Error file too big message

    I have tried to export a sequence using Quicktime conversion. It is a two minute clip and I keep getting an "Error, File too big" message. Does anyone know what can be happening?

    What exactly are you exporting to? Settings, codec, data rate? What drive are you exporting to? How is it formatted?

  • Too Many Messages? Is MailSteward Answer?

    As of yesterday, Mail will not download incoming mail from my ISP to my POP account in my computer. I have 3 accounts that feed through the ISP, and none is coming in. I have another account at gmail, and it is coming into my Mail inbox.
    My ISP and AppleCare say that I need to delete mailboxes and reconfigure mail account manually. It is THE ONLY WAY, I am told. AppleCare says I have too many messages stored. Is that really true?
    I have 10 years of messages, from 4 Macs, totaling almost 54,000 messages. If matters, breakdown is below. I don't want to lose these messages. I do search them daily for information, sources.
    Questions:
    -I watched tutorials on MailSteward, both Lite and Pro. Looks good. Any advice or recommendations on it?
    -Also read that could simply create Folder, say on Desktop, and drag and drop an entire mailbox. Then can search with Spotlight. Is it that simple?
    -If I either archive with MailSteward or a drag-and-drop, I assume that my mailboxes will still be achived in Time Machine? Time Machine will then also backup my archive that I create. Would seem very safe to then delete in Mail, right?
    Thanks, Armando
    MAILBOXES:
    -Inbox (9/05 to present) 17,000
    -Sent 17,500
    ON MY MAC
    -Import Eudora
    -Inbox 11,000
    -Sent 8,000
    Total 53,500

    The answers to those questions above is important to preventing unnecessary work, but the task that may be needed is outlined below:
    As I said, the limits on Mail are only with respect to individual mailboxes -- they should be kept below 2 GB each. I have found Mail to be rather robust at handling a large data base, so long as you do not allow individual mailboxes to become Overstuffed -- see:
    http://support.apple.com/kb/TS1895
    The document states it is for 10.4 and later -- the dimensional limits for mailboxes stated for 10.4 applies to 10.5 and 10.6.
    If a mailbox has become Overstuffed then the index for all messages may or may not cause a message about not being downloaded, but this is an inaccurate statement when there is overstuffing -- in Mail 2.x and 3.x, overstuffing can be resolved by redistributing the files in the Messages folder of the the mailbox that is Overstuffed, and then forcing a reindexing of all mailboxes -- see the following about repairing the index overall:
    http://docs.info.apple.com/article.html?path=Mail/3.0/en/14019.html
    If mailbox is not with some regularity rebuilt (using the Rebuild command) then that is one factor causing issues with the index. I say this is an outline because the methodogy for redistributing the xxxx.emlx files found in the Messages folder may or may not be obvious to you?
    Ernie

  • Why do I get the message too many redirects

    Aloha:
    Every time I try to use Safari for a search, I get the error messge too many redirects.  This just started and changing my DNSid not help.  HELP!!
    Thanks
    Dan Page
    Hawaii

    Your ISP may be redirecting your browser.
    Use Open DNS. It's free and includes anti phishing filters.
    Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
    Enter these numbers exactly as you see them here.
    Click +
    208.67.222.222
    Click +
    208.67.220.220
    Then click OK.
    More about OpenDNS here.
    Topic : Manually provided DNS server addresses are higher priority than DHCP's

  • STARTING DATABASE : PROBLEM OF Linux Error: 23: Too many open files in syst

    Hi everybody,
    I am running an RMAN script and get this error,
    9> @/u01/app/oracle/admin/devpose/backup/configuration.rcv
    RMAN> ###################################################################
    2> # Configuration file used to set Rman policies.
    3> #
    4> ###################################################################
    5>
    6> CONFIGURE DEFAULT DEVICE TYPE TO DISK;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of configure command at 08/26/2009 20:03:30
    RMAN-06403: could not obtain a fully authorized session
    ORA-01034: ORACLE not available
    RMAN> CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of configure command at 08/26/2009 20:03:30
    RMAN-06403: could not obtain a fully authorized session
    ORA-01034: ORACLE not available
    RMAN> #CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
    2> CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of configure command at 08/26/2009 20:03:30
    RMAN-06403: could not obtain a fully authorized session
    ORA-01034: ORACLE not available
    RMAN>
    RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/u01/app/oracle/backup/db/ora_df%t_s%s_s%p';
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of configure command at 08/26/2009 20:03:30
    RMAN-06403: could not obtain a fully authorized session
    ORA-01034: ORACLE not available
    But this problem is understandable, as the database is not running. The main problem why database is not running, I have found the reason but do not understand how to solve the problem.
    Since, the database was not running, I tried to startup the database, I then came across the following which is my problem (Why so many files are open? Linux OS error says too many files open. See below,
    SQL> conn /as sysdba
    Connected to an idle instance.
    SQL> startup
    ORACLE instance started.
    Total System Global Area 419430400 bytes
    Fixed Size 779516 bytes
    Variable Size 258743044 bytes
    Database Buffers 159383552 bytes
    Redo Buffers 524288 bytes
    Database mounted.
    ORA-00313: open failed for members of log group 2 of thread 1
    ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/devpose/redo02.log'
    ORA-27041: unable to open file
    Linux Error: 23: Too many open files in system
    Can anybody has run into such problem and guide me to a solution, please?
    Thanks

    Hi,
    yes, this DB was functioning o.k. this configuration script was part of RMAN daily backup.
    Last night the backup failed. So, when I opened "Failed job" in the EM, I saw this type of messages.
    That was the starting point. Gradually, I tried to narrow down on to the actual problem and found the findings as I have posted.
    One way of sovling problem, I thought that, all these processes I would kill and then try to open the database, it might startup. However, that wouldnot lead me in ensuring this won't occur again.
    That's why I am trying to understand why it should open, so many processes (why spawn so many .flb files?) Any thoughts you have around this?
    I will try to restart the OS as the last resort.
    Thanks for your help and suggestions.
    Regards,

  • DMEE error (Error Log -  Too many payment mediums created for this payment group)

    Hi Experts,
    Please see the below error while generating the DMEE file.
    Error Log -  Too many payment mediums created for this payment group
    Error is - Too many payment mediums created for this payment group
    Please explain how to resolve this error.Send detail documentation how to rectify this error
    Regards
    Sreedhar

    Hi Nimish Agarwal,
    With reference to the error faced i.e. BFIBL02160 "too many payment
    mediums created for this payment group", please review the information
    provided in the long text of this error in detail.
    Please ensure that the orders are not carried out several times.
    Alternatively you can apply the optional usable message 166 (same
    class: BFIBL02), so that you can prevent creating duplicates in future.
    Please customize this message as an error so as to prevent the system
    from creating duplicate files. You can customize this message in OBA5.
    The message BFIBL02 160 always occurs, if you create more than one
    file for the same payment run, in order to warn you not to send the
    same file twice to the bank.
    The SAPFPAYM program does not create 2 files at once. But if you
    run this program more than once for the same payment run, more than
    one file is created. From the second run on you receive the error
    message BFIBL02 160. You can easily test it, by creating a new
    payment proposal and creating a new file with this proposal and
    SAPFPAYM. The first time you run this program you will not receive
    the message.
    Hope this clarifies.
    Kind Regards,
    Fernando Evangelista

  • Error Log -  Too many payment mediums created for this payment group

    Hi Experts,
    When I am doing payment to customers through T-code F110, I am able to clear the open item. But when we are executing the Payment medium - DME Administration, generate the Payment Advice and when we see the print preview of the Payment Advice in spool request, System is showing the following errors,
    "BFIBL02160               Too many payment mediums created for this payment group"
    "BFIBL02616               End of log for payment run 20120123 / NAA02 , NSD / 200"
    "This is line 1/column 45 on page 1"
    Message no. SP01R116
    Kindly help how to rectify the same
    Thanks in advance
    Regards,
    Nimish Agarwal

    Hi Nimish Agarwal,
    With reference to the error faced i.e. BFIBL02160 "too many payment
    mediums created for this payment group", please review the information
    provided in the long text of this error in detail.
    Please ensure that the orders are not carried out several times.
    Alternatively you can apply the optional usable message 166 (same
    class: BFIBL02), so that you can prevent creating duplicates in future.
    Please customize this message as an error so as to prevent the system
    from creating duplicate files. You can customize this message in OBA5.
    The message BFIBL02 160 always occurs, if you create more than one
    file for the same payment run, in order to warn you not to send the
    same file twice to the bank.
    The SAPFPAYM program does not create 2 files at once. But if you
    run this program more than once for the same payment run, more than
    one file is created. From the second run on you receive the error
    message BFIBL02 160. You can easily test it, by creating a new
    payment proposal and creating a new file with this proposal and
    SAPFPAYM. The first time you run this program you will not receive
    the message.
    Hope this clarifies.
    Kind Regards,
    Fernando Evangelista

  • Error 483 Too many hops

    Hi,
    I am trying to establish a connection between 2 IP phones. Both these IP Phones and the OCMS set up is on the corporate intranet network. The OCMS server can ping the IP address of these IP phones.
    However when I run my application to establish the connection, I get Error 483 - Too many hops.
    Below is a snapshot of the traffic log
    ===========================================================
    2007-10-03 18:39:11,003 DEBUG [SipTcpProtocolFactory] (HTTPThreadGroup-9:) OUT> 10.76.82.218:5060/TCP 10.76.82.218:5060/TCP INVITE sip:[email protected] SIP/2.0
    Route: <sip:10.76.82.218:5060;x-resolved-addr=127.0.0.1:5060;transport=TCP;lr>
    Record-Route: <sip:10.76.82.218:5060;transport=tcp;asid=Nka8tjjpck8n-1fmviemhha96q;b;sid=0;lr>
    Via: SIP/2.0/TCP 10.76.82.218:5060;branch=z9hG4bK-1vt889yo1upzd-123r74rin7zff.1.1;rport
    Route: <sip:127.0.0.1:5060;transport=TCP;lr;appId=proxyregistrar>
    Record-Route: <sip:10.76.82.218:5060;transport=tcp;asid=Nssdunfz51fhv-1kzcwmv3kt29d;b;sid=0;lr>
    Via: SIP/2.0/TCP 10.76.82.218:5060;branch=z9hG4bK--14gqj9yqd3hj9-19yypup87imkb.1.1;received=10.76.82.218;rport=1893
    Via: SIP/2.0/TCP 10.76.82.218:5060;branch=z9hG4bK-zgadewdllfyd-1t5m2gdzw6ubo.1.1;received=10.76.82.218;rport=1893
    Route: <sip:127.0.0.1:5060;transport=TCP;lr;appId=proxyregistrar>
    CSeq: 1 INVITE
    Route: <sip:10.76.82.218:5060;transport=tcp>
    Contact: <sip:10.76.82.218:5060;transport=tcp;asid=N-1d1npn5mxp09i-12mgzhvksgk9r>
    From: "[email protected]" <sip:[email protected]>;tag=oysnl9hv9x7s-1q1474xagwpzw
    To: <sip:[email protected]>
    Call-ID: -19xcq1v6ekxfi-1fabel4uj7y4m
    Content-Length: 0
    Via: SIP/2.0/TCP 10.76.82.218:5060;branch=z9hG4bK-nv5e924as7fx-18h2cdzsqq9o7.1;received=10.76.82.218;rport=1893
    Max-Forwards: 30
    P-Asserted-Identity: sip:[email protected]
    ================================
    The Max-forwards is decremented in each subsequent message.
    Any pointers to this problem will be highly appreciated.
    Thanks,
    Uday

    Hi,
    I am trying to establish a connection between 2 IP phones. Both these IP Phones and the OCMS set up is on the corporate intranet network. The OCMS server can ping the IP address of these IP phones.
    However when I run my application to establish the connection, I get Error 483 - Too many hops.
    Below is a snapshot of the traffic log
    ===========================================================
    2007-10-03 18:39:11,003 DEBUG [SipTcpProtocolFactory] (HTTPThreadGroup-9:) OUT> 10.76.82.218:5060/TCP 10.76.82.218:5060/TCP INVITE sip:[email protected] SIP/2.0
    Route: <sip:10.76.82.218:5060;x-resolved-addr=127.0.0.1:5060;transport=TCP;lr>
    Record-Route: <sip:10.76.82.218:5060;transport=tcp;asid=Nka8tjjpck8n-1fmviemhha96q;b;sid=0;lr>
    Via: SIP/2.0/TCP 10.76.82.218:5060;branch=z9hG4bK-1vt889yo1upzd-123r74rin7zff.1.1;rport
    Route: <sip:127.0.0.1:5060;transport=TCP;lr;appId=proxyregistrar>
    Record-Route: <sip:10.76.82.218:5060;transport=tcp;asid=Nssdunfz51fhv-1kzcwmv3kt29d;b;sid=0;lr>
    Via: SIP/2.0/TCP 10.76.82.218:5060;branch=z9hG4bK--14gqj9yqd3hj9-19yypup87imkb.1.1;received=10.76.82.218;rport=1893
    Via: SIP/2.0/TCP 10.76.82.218:5060;branch=z9hG4bK-zgadewdllfyd-1t5m2gdzw6ubo.1.1;received=10.76.82.218;rport=1893
    Route: <sip:127.0.0.1:5060;transport=TCP;lr;appId=proxyregistrar>
    CSeq: 1 INVITE
    Route: <sip:10.76.82.218:5060;transport=tcp>
    Contact: <sip:10.76.82.218:5060;transport=tcp;asid=N-1d1npn5mxp09i-12mgzhvksgk9r>
    From: "[email protected]" <sip:[email protected]>;tag=oysnl9hv9x7s-1q1474xagwpzw
    To: <sip:[email protected]>
    Call-ID: -19xcq1v6ekxfi-1fabel4uj7y4m
    Content-Length: 0
    Via: SIP/2.0/TCP 10.76.82.218:5060;branch=z9hG4bK-nv5e924as7fx-18h2cdzsqq9o7.1;received=10.76.82.218;rport=1893
    Max-Forwards: 30
    P-Asserted-Identity: sip:[email protected]
    ================================
    The Max-forwards is decremented in each subsequent message.
    Any pointers to this problem will be highly appreciated.
    Thanks,
    Uday

Maybe you are looking for