Error message "Transfer date 30.06.2007 is more than one year after the clo

Hi SAP expert,
I received error message "Transfer date 30.06.2007 is more than one year after the closed fiscal year" - message number AC 187. Used Tcode OAAQ when tried to reverse year end closing for depreciation area. How can i correct this problem? I want to finish for the whole year 2007 depreciation.
Hope u guys can help me. Thanking u in advance.
Regards,
Nazrul

Hi SAP experts,
any solution for my porblem?
TQ

Similar Messages

WebLogic Error : Registered more than one instance with the same objectName

HI there, I'm facing a big problem. I have two environments installed on the same physical machine.
I have ALSB and WLI servers running out there.
Environment 1 - WLI port running at 7011 domain name : stp_wli_domain and ALSB port running at 8011 domain name: stp_alsb_homo1 - folders- stp_wli_domain / stp_bea_alsb_homo
Environmnet 2 - WLI port running at 7211 domain name : stp_wli_domain2 and ALSB port tunning at 8211 domain name : stp-alsb_homo2 - folders - stp_wli_domain2 / stp_bea-alsb_homo2
Everything was working fine, but these days I had install new deployments on both environment and I got this error :
java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : stp_wli_domain:ServerRuntime=wli_wls01,Name=stp_wli_domain,Location=wli_wls01,Type=AIRuntime new:com.bea.wlai.management.AIRuntimeMBeanImpl@bcf22dc existing com.bea.wlai.management.AIRuntimeMBeanImpl@de02e6c
The weird is : There is no same object name, as you can see, domains are different, folders are different and ports are diferrent, including multicast addresses.
Have you guys seen this before ?
I'm under pressure here, 'cause some projects had stopped to work.
Please I would appreciate any help.
Tks.
Edson

HI there, thanks for attention..
See ...
There's a lot of confusion with these env's .
I did not built this, so... I'm cleaning my hands.... anyway... :)
I must fix....
Well basically if we have two env's, so we have different project each one right ?
Ok, but I was told that if you have on the same network and same physical machine the name of AdminServer as "AdminServer" in all domains, so it goes with problems... I never heard about it... but is a good practice you put the names for example :
WLI - WLIAdminServer
ALSB - AlsbAdminServer
WLI2 - WLiadminServer2
ALSB2 - ALsbAdminServer2
I would do it.. this way..
But how it wasn't me...
We got..
WLI - WliAdminServer
ALsb - AdminServer
WLI2 - AdminServer
ALsb2 - AdminServer
Have you got it ?
So... I was told that this could be a problem, almost all AdminServers with the same name... guess what ?Some Projects are back to work. but not at all.. only some.. so I 'm breathing better now... but I would like to know if you seen this before ?
I would appreciate your help again.
Unfortunately there's no detailed stack trace to track this
Tks.

Can i back up more than one iphone onto the same computer and keep data separate?

can i back up more than one iphone to the same (pc) computer and keep the data separate?

http://support.apple.com/kb/HT1495

Can a master data will have loading from more than one data source

Dear gurus,
I have a master data object which has every day loading from one particular data source. Now I got a requirement to load data from another data source. If we load data from more than one data source , will there be any problem with data? Will it accept loading from more than one data source.?
Regards
Rs

Hi Ram,
We can load the data to target morethan one datasource.Thats advantage in BI compare to BW. It will accept loading from more than one datasource.but you have to take care about characteristic and attributes are the same in both datasources like that.
Regards,
SVS

More than one field contain the data field attribute

What If more than one filed contain data filed, do I need to run the rule file more than one times

This has been discussed mant times in the list.You can search for a more complete answer, but basically, you don't define a column as data but rather with the measure/account/whatever it represents.
for exampel suppose you ahve the numbers 10,10,10 in your file. Instead of seting the member to data, you could set the firt column to Jan, the second to Feb and the third to Mar

How to use cursor data in more than one location in the form?

hi all.
is it possible to make cursor as global or public in the form so i can use its data in more than location for testing like in buttons triggers.
for example:
if i declare the following cursor in "WHEN-NEW-FORM-INSTANCE" trigger
CURSOR cur
IS
SELECT ID, NAME
FROM PERSON;how can i use this cursor in other triggers in other buttons in the form?
thanks

kareem wrote:
now i have the old data- from cursor and the new- from tableNo, you have not. When you open the cursor you get the state of the database at the current SCN.
If you
- open your cursor, fetch the data and close the cursor
- update some data
- open your cursor, fetch the data and close the cursor
you will get the updated data from your cursor the second time (unless your update isn't a uncommited autonomous transaction but I wouldn't go down that route).
You will have to save your data somewhere or you might take a look at flashback: http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/consist.htm#i20759
cheers

Thunderbird wants to open messages, each in a new window; deletes more than one message

-- and does,most of the time! Whether it's one message, half a dozen, or 36 (as last night) Thunderbird is now entirely too sensitive to open messages in a new window. When I delete a given message, often as not one or more messages go glimmering with it, then I have to go to the trash folder and retrieve the message I did _not_ want to delete.
What if one of those messages that opens in a new window contains a virus? Granted I have a good, powerful antivirus but I'd appreciate having my computer time to myself -- not having to deal with glitches and viruses.

Again about the mouse, huh? Why can't you admit it's in the software? After the last time, remembering about the advice on the mouse, I tried three different ones. It is NOT the mouse. Fix the software the way it used to be and keep it that way, and the problem will be solved. Meanwhile I'll be researching other email clients. I've HAD it!

"iPod Touch can not be backed up. The file needed can not be found" This is an error message I got when trying to restore my iPod Touch today after the volume bar disappeared!

Today the volume bar disappeared on my iPod Touch leaving me with no volume control. When I tried to do a restore I got the message "iPod Touch can not be backed up. The file needed can not be found" I'm in a double whammy here. First off has anyone ever got and cured either problem?
Thanks!

Problem solved thanks to another post here on the same topic.
1-Opened i Tunes & Connected iPod Touch
2- Unchecked "Open iTunes when connected"
3 - Synched iPod
4- Hit "Apply"
5- Checked "Open iTunes when connected"
6- Synched iPod
7 - Hit "Apply"
8- Ejected iPod and closed iTunes
9- Re-connected iPod Touch
10- iTunes opened automatically!

Error with SDO_TUNE.EXTENT_OF on a table with more than one geometry.

Hello,
I'm using a GeoServer with Oracle Spatial database, and I run into some problems. GeoServer uses SDO_TUNE.EXTENT_OF to calculate the maximum extent of features you add. It works fine for all object with only one geometry, but fails for objects that has two geometry columns. The error is ORA-01422.
Is this a bug in Oracle, or am I doing something wrong? I know SDO_AGGR_MBR works fine, but I'd rather not use it, since if it is possible I would like to avoid changing the GeoServer functions.
Here is a small script I created to show this error:
1. Create two tables, object1 with one geometry and object2 with two geometry columns.
2. Create metadata (projected coordinate system).
3. Insert two rows, one in each table.
4. Create spacial indices.
5. Calculate extent, on object1 it will succeed, on object2 it will fail.
6. Clean.
CREATE TABLE object1
     id NUMBER PRIMARY KEY,
     geom1 SDO_GEOMETRY
CREATE TABLE object2
     id NUMBER PRIMARY KEY,
     geom1 SDO_GEOMETRY,
     geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
     'OBJECT1',
     'GEOM1',
     2180,
     SDO_DIM_ARRAY
          SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
          SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
     'OBJECT2',
     'GEOM1',
     2180,
     SDO_DIM_ARRAY
          SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
          SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
     'OBJECT2',
     'GEOM2',
     2180,
     SDO_DIM_ARRAY
          SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
          SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(450000, 350000, NULL), NULL, NULL));
INSERT INTO object2 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object2_geom1_sidx ON object2(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object2_geom2_sidx ON object2(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT SDO_TUNE.EXTENT_OF('OBJECT1', 'GEOM1') FROM DUAL;
SELECT SDO_TUNE.EXTENT_OF('OBJECT2', 'GEOM1') FROM DUAL;
SELECT SDO_TUNE.EXTENT_OF('OBJECT2', 'GEOM2') FROM DUAL;
DELETE FROM user_sdo_geom_metadata WHERE table_name IN ('OBJECT1', 'OBJECT2');
DROP INDEX object1_geom1_sidx;
DROP INDEX object2_geom1_sidx;
DROP INDEX object2_geom2_sidx;
DROP TABLE object1;
DROP TABLE object2;
Thanks for help.

Hi,
As a workaound to avoid the ORA-01422 errors, you could try to create views on your object2 table, and insert their geom metadata (with view names as table names!))
create view view2_1 as select * from object2;
create view view2_2 as select * from object2;
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'VIEW2_1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'VIEW2_2',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
SELECT SDO_TUNE.EXTENT_OF('OBJECT1', 'GEOM1') FROM DUAL;
SELECT SDO_TUNE.EXTENT_OF('VIEW2_1', 'GEOM1') FROM DUAL;
SELECT SDO_TUNE.EXTENT_OF('VIEW2_2', 'GEOM2') FROM DUAL;
Results in 11.1.0.7.0
SDO_TUNE.EXTENT_OF('OBJECT1','GEOM1')(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), S
SDO_GEOMETRY(2003, 2180, NULL, SDO_ELEM_INFO_ARRAY(1, 1003, 3), SDO_ORDINATE_ARR
AY(450000, 350000, 450000, 350000))
SQL>
SDO_TUNE.EXTENT_OF('VIEW2_1','GEOM1')(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), S
SDO_GEOMETRY(2003, 2180, NULL, SDO_ELEM_INFO_ARRAY(1, 1003, 3), SDO_ORDINATE_ARR
AY(500000, 400000, 500000, 400000))
SQL>
SDO_TUNE.EXTENT_OF('VIEW2_2','GEOM2')(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), S
SDO_GEOMETRY(2003, 2180, NULL, SDO_ELEM_INFO_ARRAY(1, 1003, 3), SDO_ORDINATE_ARR
AY(550000, 450000, 550000, 450000))jack

How to extract data into excel file from more than one internal table

Hi Guys
             I want to extract the data from module pool screen.
             In screen there are two internal tables
                  1. header
                  2. items.
             I want to extract the data as same format looking in the screen.
             With simple Download FM we cannot do this one, because in this we   will display as continuous rows.
<b> But my requirement is saving as table with heading, date, header details</b>
Note that it is not the simple down load . Suggest me with example coding

Hi Guys,
I think it depends on which software you will use to see the result.
If U are using Excel, it's very easy to achieve it.
1. Define a structure as string, the lenth depend on your need.And use the structure to define a internal table, supposed is as A..
2. Concatenate the head data using some separator, for ex. a comma; and then add this into A.
3. The above step's concatenate is depend on your format for request;For ex, you want to place the date at the 4th cell in excel, that means you should put three separator before the date field.
4 Concatenate the item data into the download table.
5. Download the table to file.
6. Display the file, using your defined separator.
Hope this helpful.
Bob

Error message - Cannot print to more than one recipient

Let's face it, the email addresses allocated to our printers aren't exactly memorable. My solution was to set up a Gmail account with a memorable address and use the 'Forwarding' feature to redirect eprint requests to my printer. It is not working and I get an error message saying that I cannot send a print request to more than one recipient.
The forwarding option on Gmail only has one email address in it, my eprint addy, so I'm stuck now as to what to do next.
Can anyone solve this problem please or offer another alternative solution?
Many thanks.
This question was solved.
View Solution.

I believe when ePrint server has received the email, it made the necessary settings and configured the job for printing and then it went for "Reply All" option. So here it cannot send the print job to your personal email ID and the error came up.
The only option I can think of is add the printer email ID to your email contact list and give it a name like MyPrinter so you can remember easily , just like email contacts are added in Outlook.
Mark this post as answered so that others can find it useful.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Drill Down error with more than one dimension

Hello
I'm using AWM 10.2.0.3.0A with Oracle 10.2.0.1.0 and i can't perform drill down operation when i have more than one dimension in the same axis. That is, when i have two dimensions, a can't perform drill down on both dimenions at the same time, but only one at a time.
Would anyone ever had this problem? What can be?
Thanks
Luciano

Hello Brijesh
I succeed do this operation in other works, but not this. After performing drill down in the first dimension, i clicked on the second dimension and nothing happens.
It doesn't emit any error message.
Normally should be able to view the data calculated for the two dimensions. I have 6 small dimensions tables (average of 700 records). I don't know what can be.
Thanks,
Luciano

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

Error using pretrigger when capturing more than one channel

I am having problems acquiring data with pretrigger samples when capturing more than one channel, using NI-PXI-6071E hardware and Labview's Analog Input VIs (Legacy NI-DAQ).
My goal is to trigger on one signal, while capturing another. Unfortunately, I cannot use the PFI0 for external triggering, as our cables/hardware have already been built, so I must use an analog input channel as the trigger. I understand that to do so I must capture both channels, and the channel that I wish to trigger off of must be the first channel in the list.
If I trigger and capture on the same channel (tried 1-4) then it
works great, regardless of the number of pre-trigger samples set. If I
capture more than one channel (passing the trigger channel first), with no pretrigger samples set, then triggering and capturing both work fine. However, if I do the same with the pretrigger sample > 0 I get the following error:
Error -10621 occurred at AI Control. Possible reason(s):
NI-DAQ LV: The specified trigger signal cannot be assigned to the trigger resource.
I don't se any such limitation explained in the user manual, and searching the forum, I have found a few other people that had the
same
problem
but they did not have solutions. Any ideas?
Solved!
Go to Solution.

I'm sorry for double-posting this. I was trying to post it in the DAQ board and it kept ending up on the LabView board.
If moderators have the ability to delete this thread you are welcome to do so.

How to apply data into 2 tables AND to more than one record in same table?

Hello,
I am trying to apply/insert data into 2 tables AND at the same time apply data to more than one record (in the same table). How would I do this in APEX?
I have updated using one table with no problem, however, when I try updating with the two tables/ multiple record sets, I get errors.
I appreciate the help.
Thanks.
Linda

You can achieve what you want using PL/SQL. Can you post ur code?

Error message "Transfer date 30.06.2007 is more than one year after the clo

Similar Messages

Maybe you are looking for