Error message trying to copy files to second hard drive
we have a project, about 100 gig or so, that we want to copy from the external drive it is on, to a second external drive.
the process stopped after a while, with only about 60 gig transfered, with an error message saying "finder error code -36 can't read or write" a particular file (untittled2-7) or something similar...
the file itself appears to play fine form the original drive, and its about 2.7 gig.
any ideas what could be causing this, and what we could do to make it transfer across?
cheers
hugh
Yeah it's pretty easy if you pay attention to the top area of the window.. it will tell you what will happen if you click GO... Just select the files, right click on one of them to select Media manager. Then select copy, and a destination... read that summary to make sure what you're getting ready to do is what you want to do... it's pretty straightforward if you read that summary.
Jerry
Similar Messages
-
Error -50 when trying to copy files to external hard drive.
When trying to copy files (itunes music folder) to an external hard drive, I get the following message: Copying music failed. An unknown error occurred (-50).
I have tried repairing disk permissions but still get the message. Any thoughts?Gary,
A couple of posts referencing "error -50" seem to indicate that the error could result from a corrupted file.
One from Kappy follows:
Error -50 Post
One way you could save your music to the other drive would be to do it folder by folder (dragging each artist's folder, to the other drive). I suspect you won't have many (if any) errors doing that, and if you hit the corrupted file, you can come back to that folder and see which one is bad. You could also try to drag groups of artists folders to the drive if you had quite a few. One note: If you save your files this way, you won't be saving the library, which contains all the playlists you've created...you'll have to recreate them.
If you needed that music down the road, you could just do a File>Import from iTunes....
Hope this helps,
Bob -
Error code 36 when copying files to external hard drive!
I keep getting this error when I try to copy files to my external hard drives. It is the same error no matter what drive I use. It says it cannot perform the operation because the data cannot be written - like there is a permissions problem, but I checked all the files, and there is no permission problems. The file sizes are small .iff and .jpg --- There is not more than 10 characters in the naming, so what is going on? I have folders inside of folders, and it will not copy - but if I go into the folders and copy each file one at a time, by itself, it works. I don't get it? Anybody have any thoughts?
a very common issue caused by a bug in snow leopard finder when dealing with FAT formatted drives. see this link for details and a fix
http://discussions.apple.com/thread.jspa?messageID=11122044� -
Error when trying to copy files to external drive
When attempting to copy files to external hard drive I get a message " unable to copy some data, error code -36".
How do I find out what that error code is tring to tell me?Sadly, I have had this issue as well. Last eyar Iit got to the point I couldn't copy at all. From what I recall, Apple told me it could be one of many things. A bad internal drive, bad permissions, a bad external drive, a bad firewire port, a bad cable, bad memory, and on and on. I never did figure it out, but I do know my hard drive did crash a month later. However, having said that, I own a new computer, and last week, it started again. Still have not figured out what is going on. Good luck.
-
I cannot get my iTunes library/music from my old computer to my new one. The old computer is so messed up that I cannot even open a browser.I tried to copy to an external hard drive and the music was there until I went to upload to the new computer. I disconnected my old computer so I will have to reconnect it I am sure. thank you for any help. Last time I transferred I used a product I purchased. That was a long time ago.
First of all make sure that you've definitely backed up the movies to your external hard disc.
In iMovie click on any event you don't want, go to the file menu and select 'move event to trash'. Then do the same for any unwanted projects - 'move project to trash'. Quit out of iMovie and empty the trash.
Hope that helps! -
how do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls
Welcome to Apple Support Communities
When you try to copy data to the external drive, what happens? If you don't see any error, the external drive is formatted in NTFS, and OS X can't write in it.
To be able to write on this external drive, you have to use an app like Paragon NTFS. Another solution would be to format the external drive in FAT32 or exFAT with Disk Utility > http://pondini.org/OSX/DU1.html Make sure you copied all the files of the external disk to the internal disk before doing it -
Finder freezes when trying to move files to external hard drive
Whenever I try to move files from internal hard drive to my external finder freezes it. I have over 5 TBs of free space on my external, so I know it's not a space issue. This happens no matter the size of the file. It starts the copy and then will freeze before it finishes. If I try to force quit and select relaunch it acts like it is relaunching but my icons never re-appear and the command bar at the top never returns. So I end up having to hard boot.
I just reinstalled the 10.5.8 combo update and verified both hard disks, if any repairs came up I repaired and then did the same with disk permissions....it's still freezing on me. I am frustrated because there are some files I'd really like to move to my external raid hard drive but I'm not able to.
The freezing happens if I'm trying to transfer files from a disc or an additional external HD. My internal HD is only so big and the external Raid drive is for my capture scratch on Final Cut Pro and I'm even having issues capturing to that drive. Everything wants to be on my internal HD and that doesn't work for me.
Any help would be greatly appreciated.Sean Dale1 wrote:
Do you get any error messages and if so what are they? Do you have any problems copying files off the problem drive back to your Mac or do the freezes only occur when copying to the external?
No I don't get any error messages, the finder just freezes and when I try to relaunch finder it doesn't relaunch properly..all icons are missing and I'm not able to access the the task bar to properly shut down so I have to hard boot.
It happens only when trying to save files to the external, whether through drag and drop or within programs. I am able to access files on the external and copy files from there to my internal without problems.
Have you tried attaching this drive to another Mac and if so do you get the same issues?
I don't have another Mac to attach the drive to.
How is this RAID attached, SCSI, FireWire, SATA or what? How was the RAID created, Disk Utility or third party software and have you verified the integrity of the RAID?
The RAID is attached via SCSI. In an attempt to solve this finder issue I re-installed the drivers to the most current drivers available and in doing so updated any firmware....and there was no change. I was not the one who set up the RAID so I don't know how it was created. It's an Enhance UltraStore R16 and I've been using it without issues since January 2007 and this freezing thing has been intermittent for a few months now but now it's constant and annoying. I've verified the disk through disk utility but I don't have any software to check the integrity otherwise. Do you have any recommendations as to what software I could use to do this?
Message was edited by: Emily80 -
Error message when setting up export preset to hard drive
laptop is only a few months old LR 5, updated 5.7 recently. trying to create export preset to hard drive. First time trying this to send photo for email. an internal error has occurred Win32 API error2 system can not find file specified when calling shellExecute ExW from Ag workspace.
What would cause this error and how do I fix it?
AndreaHello Jen,
Congratulations on your new MacBook Pro! I understand how important is to have your email account setup on your new computer. I found a couple of resources that I think might help.
You can check the Mail Setup Assistant for the server settings for common email providers. I recommend checking your email settings here first to verify they match what you have in the Mail application:
Mail Setup Assistant
https://www.apple.com/support/macosx/mailassistant/
If the Mail Setup Assistant does not provide settings for your email account, you can use the following article when contacting your email service provider to gather the necessary information to setup your account:
Configuring Mail for your email account
http://support.apple.com/kb/HT1277
If you are able to setup your account but messages are not being downloaded, I recommend reviewing the following article:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Thank you for using Apple Support Communities.
Best,
Sheila M. -
HELP! I can't copy files to my hard drive
This is weird. I've had my MP since it came out and all was fine until the other day. All of a sudden I cannot copy anything to my Hard Drive! Not from a CD, not from an external HD. I can copy TO other places but not to my working folders. I also cannot copy from a DVD (where I have files archived) to an external drive I use or my HD.
Whatever happened though seems to have affected my other computer (G4 Quicksilver) which I have networked to my MP because I can't stuff copy there either. Nor can I copy items back and forth when connected.
I've repaired permissions many times.
Any ideas?Verify the disk, then verify permnissions. And make sure that "Ignore Ownership on this volume" (Get Info) is not selected, or is not even present (shouldn't be for boot drive).
It sounds like an ownership issue, maybe a corrupt directory. -
Time Machine not backing up system files on second hard drive
The system files are not being included in my time machine backups on my primary drive (an internal SSD) but they are for my secondary drive (an internal HDD). I want to revert the system back to a previous state because of a change I made to the Audio folder in Libraries that may have cause an issue. When I look at the backup on my backup disk, the folder isn't even included on the SSD (the drive I made changes to). Is it hidden or just left out? I checked the Time Machine preferences and there are no folders listed to be excluded.
1) Does this mean that I will not be able to do a full system restore from these Time Machine backups?
2) How can I include those files in future backups?
Thanks!
System information:
MacBook Pro Mid 2012
OS X 10.8.5 (12F45)
2.6 GHz Intel Core i7
8 GB 1600 MHz DDR3
240 GB OWC Mercury Extreme Pro 6G SSD (Main Bay)
750 GB Apple HDD (Optical Bay)I apologize, the title of this thread is misleading. I meant it to say "on primary hard drive", not "second hard drive". Sorry for any confusion.
-
Mover user file to second hard drive
I have a new iMac with a SSD on which applications are loaded, and everthing else is there by default. But I wanto store music, documents, photos, etc on the second hard drive. Can I just drag the "user" file to the second hard drive, since that's the file that contains docs, photos, etc?
Yes, but if you want to use it as something other than a backup, you also need to open the Accounts pane of System Preferences, control-click your account, and change the home folder path. This will look like /Volumes/volumename/foldername/ when changed.
(61104) -
Media file error message trying to play files from WDMycloud on ipad
I am using a WDMyCloud networked hard drive to provide cloud backup for my Windows PCs. This backup includes my Itunes music library
Using the WDMyCloud app on my iPad(or iPhone) I can see the library is succesfully backed up onto WDMy Cloud and can see all expected songs listed.
Unfortunately when I try to open some of them on my iPad or iPhone using the WDMyCloud app I get an error message "Unable to play this media file". Some files do open OK
File formats are mostly .m4a or otherise .mp3 and I have experience of problems with both types of files.
I used to be able to play all WDMyCloud stored media files without any problem on my iPad/iPhone devices, and I am not aware of changing anything in iTunes/WDMyCloud or my Apple devices other than ensuring I keep up with the latest released software/version.
Interestingly, I copied a couple of files that would not play into Dropbox onto my PC. I then looked for them on my iPad and iPhone usingWDMycloud app and looked into synced Dropbox folder in WDmy Cloud and found the files and hey presto they play OK.
They also play on my iPad and iPhone if I go direct to the Dropbox app itself.
Finally,I can also access my WDmyCloud via my Samsungsmart TV since it is on the same home network and and the "problem" files will play OK on the TV.
With my limited technical knowledge, its not clear that there is any difference between the files that play and those that don't.
Grateful for any advice on what I might be able to do to fix it so all my files will play
Many thanksI see. I understand Cisco just recently released this model in the market so probably there would be more tests to be done for further isolation and come up with a fix solution if proven to be really an issue. I guess for now we'll stand by for updates and just make the best out of Cisco's one of the top of the line routers.
-
Error when trying to copy files to a DVD+RW
I am unable to copy images to a brand new blank DVD+RW disc. I keep getting an error message "Current disc canot be overwritten...". Please help.
I can use Windows 7 to copy the picture files by opening the blank DVD and dragging the files to the disc folder; I just cannot see any way to use PSE 9 to copy the files because it keeps giving me the error message that the disc cannot be overwritten.
I would like to use PSE 9 to copy images to a DVD, rather than have to use windows. -
Can not copy files to another hard drive for backup
30May07
Apple Support:
I need to copy files from my home to an external hard drive because I need to do a complete re-install, and erase the laptop's hard drive.
When I try to either move the home folder the icon is a house, I get an question stating that some of my files do not have permssions, do I want to continue anyway (Yes, I do!)
A bit into the move, I get this message (dealing with permissions):
Can not copy 1528.emix . Error code -36 .
I have no such file or any .emix files either. I was able to copy to whole hard disk, not just the home to the same external drive two weeks ago.
How can I copy my HOME to my external drive so I can reinstall the OS?
Thank you for your help07Jun07
I believe the problem was my computer's internal drive. It corrupted several files. I had a very hard time copying the files. The -36 error stopped any transfer cold.
I did a complete install of the OS.
I need a way to determine what files are corrupt so I can delete them. It took 24 hours to constantly keep trying to copy the files to the external drive. I ended up deleting a lot of un-corrupt files. How can I determine which ones are bad so I don't delete good data?
Thank you for your help. I am also grateful to the Apple Store in Tucson, AZ.
You are having a hardware problem - there's a problem
on one of the drives in this story.
This can be caused by extra hardware connected to the
computer, so if you have anything extra connected to
the computer (external iSight, iPod, USB hub,
anything) disconnect it.
If that doesn't help, try reformatting the external
drive and try again.
If that doesn't help, just rescue what you can,
because the next step is that you're going to be
reformatting the internal drive. -
Copied Files to External Hard drive and they are not available now.. where
Please help!
I have a G4 that had an original 20GB Hard drive. I installed a 60GB Hard drive. I was running OS 9 on the 20GB drive and OS X on the 60GB. I was working with a lot of video and pics and filled the 60GB drive, so I added an external 250GB drive.
Recently, I received messages that my start up disk was almost full (60GB), so I moved my users file from the 60GB drive to the 250GB. The file size was 47ish GB and so I thought I would create some room. The move took approx. 40 mins as I copied the folder over to the 250GB drive. Once it was there I verified it only by it's size and once I saw that it existed on the 250, I trashed the users file from the 60GB drive and then emptied trash.
I lost the icons and items on my desktop, however, desktop background remained the same. I cannot access anything that I opriginally had. The users file still has the same folders that it did, but they are now relatively empty. Each folder is approx. 50 kB in size but the users folder still exists as 47GB.
If what I have explained makes sense, can someone help me to either copy back my users folder (I tried that, but the 60GB drive still says it is full) or suggest something else (And not that I am a fool, as I figured that one out already!)
I ran Diskwarrior last night to verify the pathways etc. and everything is in order... I am lost... Please help if you can!
Thanks!
DavidDear David,
Did you move the entire "yourhomedirectory" name over to the 250 gig HD and then did you delete the entire "yourhomedirectory" file?
From what I have read, OS X will always be looking for Desktop, Documents, Library, Movies, Music, etc under "yourhomedirectory". There is some way to tell the system that they are located somewhere else but it is kind of hard.
When you mount the 250 gig drive do you see any of the files that you you moved over?
What do you see when you log into the OS X volume. Are there any files for you to see.
Not really sure what you did but let's see if we can get you fixed.
Dan
Maybe you are looking for
-
The PDF couldn't copy words after highlight it.
I open the pdf files with preview in OSX 10.7.2. However, I found the pdf files crash after I highlight it sometimes. I means that I couldnt copy the words in the PDF anymore. The same problems occurred in the 10.7 and not occurred in 10.6. I open th
-
X1 display flickers, grafics settings are lost all the time
Dear all, I am facing massive problems with my X1 (i5, Windows 7 64 bit). The internal and external displays start flickering randomly, sometimes even directly when booting the system. In Windows when this happens very often the dislay settings are g
-
Error 13014 cannot open itunes
I recently updated my iTunes to iTunes 10.2 for Windows (64-bit). Everytime I try to open iTunes I get an error message saying: "The iTunes application could not be opened. An unknown error occured (13014)." I looked in previous threads and they said
-
How can I redeem my prepaid card if it keeps telling my it is the wrong code when I know it is the correct code?
-
Can the Paragraph Catalog be printed or exported?
Is there a way to print or export the Paragraph Catalog of a FM document? My goal is to compare the list of tags available in one document to those of another. Thanks so much for any insights.