Error message trying to save Mail preferences

Writing your preferences to disk has failed. Your preferences may not have been saved. The permissions on ~/Library/Preferences may be wrong or your disk may be full.
I have read previous discussions on this (2011) and used disk utility to clear permissions, but cannot find any mail.plist in Library
any advice?

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Back up all data now. Before proceeding, you must be sure you can restore your system to its present state
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Similar Messages

  • I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

    I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
    i tried adding user macintosh hd/users/your_user/pictures/"photo booth"  but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use  another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request.   How fix?

    Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request.   How fix?

    Outlook 2013.  Under Start Up Options, I have checked "Make Outlook the default program for E-mail, Contacts, and Calendar".

  • When attempting to set up iCloud on my iMac I receive the following error message 'To use the "iCloud" preferences pane, System Preferences must quit and reopen'. I have tried quitting, re-booting etc but still receive this message. Any ideas?

    When attempting to set up iCloud on my iMac I receive the following error message "To use the 'iCloud' preferences pane, System Preferences must quit and reopen."
    I have tried quitting, even re-booting etc but still receive this message. Any ideas?

    This is a shot in the dark, but try this:
    log-in to your iCloud account with your Apple ID
    change your password
    ensure your billing information is up-to-date
    attempt to re-enable your Keychain (again)

  • Error while trying to save layout:Console layout (Access is denied)

    Got an error while trying to save changes made in the layout,
    The error message is
    1) 'Preference.properties' (Access is denied), In the details button 'java.io.FileNotFoundException...'
    2) and on continuing futher, another message displayed is - 'Error while trying to save layout:Console layout (Access is denied)
    There is no Oracle Error Number associated with this message. It is a Oracle Warehouse Builder Error
    I have checked that
    1) this file exist in owb home/owb/bin/admin/Preference.properties
    2) It is not read only
    3) tried to set a parameter REPOS_DB_VERSION_ALLOWED=Oracle 10g
    as specified in the Installation and Admin Guide
    Please can you help?

    Also, not that you shouldn't get to the bottom of this, but you should be aware that any of your development or mapping changes are likely still being saved to the respository.
    In other words, you could continue working and just ignore these errors. We ran into this situation (it was indeed simply file permissions on the owb directories), but we noticed right away that at least our actual OWB work was in fact still being committed to the respository every time.

  • Error message: iMovie cannot save changes to the library!?!

    iMovie crashed my computer and now I can't creat a new movie.
    Here's the full error message:
    iMovie cannot save changes to the library.
    The hard disk where your library is located may be full or unavailable or permissions may have changed. To avoid losing your work, quit iMovie.
    What's up with this? I tried trashing the preferences, but got the same message. I have a 27-inch late 2013 iMac running Mavericks with 445.55 GB free space.
    Please let me know if you have any suggestions.

    You've already tried trashing iMovie preferences (By the way think in Mavericks you have to reboot as well after this for the new preferences to take effect) .  One other thing to try is creating a new user account, logging in and seeing if you can create a new project in iMovie (of course you won't see your exisitng projects).  If you can then iMovie itself is OK.  If not  then the only other thing I can think of is re-installing iMovie  (see http://macs.about.com/od/usingyourmac/qt/How-To-Re-Download-Apps-From-The-Mac-Ap p-Store.htm)
    Is everthing else working OK after your computer crash?  Maybe you should also run Verify disk in Disk Utility.
    Maybe someone-else has some other suggestions (I have not heard of this problem before)?
    Geoff

  • Error while trying to save a crystal report via the Add-ins

    Hi All,
    I'm getting an error while trying to save the crystal report after I have opened it from the SAP.
    When I'm trying to save the report via the Add-ins I'm getting the next error :
    Unknown error accured failed to get the internal key of the current user.
    Thanks for your help,
    Eyal

    Hi Eyal,
    Even though you posted your 1st message couple of month ago, I would still say welcome you to post on the forum.
    What is your B1 version and PL?
    Thanks,
    Gordon

  • Error when trying to save a fillable form?

    Hi,
    My staff is getting an error when trying to save information that was typed in a fillable form. They are able to print but cannot save. The error message they are getting is: "Cannot Save Form Information Please note: You cannot save a completed copy of this form on your computer. If you would like a copy for your records, please fill it in and print it." They have also gotten the message: "Save a Blank Copy of this Form Data typed into this form will not be saved. Adobe Reader can only save a blank copy of this form. Please print your completed form if you would like a copy for your records."
    This form was created in LiveCycle ES4. I have Adobe XI on my computer and I am able to save the form fine. My staff has Adobe 9 on their computer. Is there anything I can do so that they will be able to save the form on their computer once they have finished filling it out?

    Gilad D (try67) wrote:
    Mac users can fill in LCD forms just fine, they just can't create them.
    And you can fill in and save an LCD form in Reader, if it has the appropriate rights applied to it in Acrobat before-hand.
    I thought The latest Reader XI (regardless of Platform) had the ability Print and save with or, without reader rights. That what I've been reading on this forum ever since reader XI came out.

  • Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

    My macbook pro say this message when i open photo booth. Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time." any one help me please

    My macbook pro say this message when i open photo booth. Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time." any one help me please

  • Error message trying to synchronise audio and midi sample rate 42463

    I have a Rode Podcaster mic that is terrific. It has been working fine in GB. suddenly I am getting this when I try to record my podcast:
    'Error message trying to synchronise audio and midi sample rate 42463 recognised. Check conflict between Garageband and external device'
    Has anyone experienced this before? How do I resolve it? I'm still using my Version 6.0.5.
    Apple, is this a way of forcing me to upgrade to V10?

    Just click the icon on each track that stops it acting as a live input. It looks like a sound wave. Only have them clicked orange when using the track to record! I don't know if that will solve your problem!

  • My MB Pro is no longer syncing my iPad in iTunes. It did in the beginning, however I had to change my MB Pro password. Now I get a permissions error message trying to sync: "error storing your authorization information on this computer." Can you help?

    My MB Pro is no longer syncing my iPad in iTunes. It did in the beginning, however I had to change my MB Pro password. Now I get a permissions error message trying to sync: "error storing your authorization information on this computer." Can you help?

    First I would just try deleting the SCInfo folder, restart your computer, open itunes and see if you are still getting the error, at that point if you are it is a permissions error with the computer specificaly and not in itunes.
    http://support.apple.com/kb/TS1389
    that is for deleting the scinfo folder. scroll to the bottom of the article and the steps are there

  • Error when trying to save a file

    I get this error when trying to save any file (newly created or not) word document in MS word 2010:"You are attempting to save a file type (plain text files) that has been blocked by your File Block settings in the Trust Center".
    I followed the directions given by the Microsoft Knowledge Base article 922850, but I am still having this issue. I can still save files as PDF but not in any kind of word format. 
    I also tried opening another file copy and pasting under a different name and it doesn't help.
    Please Help.
    Bruce

    Hi,
    Please try the following methods:
    Using Administrative Template files and the Office Customization Tool to disable the restriction
    Use a trusted location, or create an exempt location
    Quote from:
    http://support.microsoft.com/kb/922849/en-us
    Regards,
    George Zhao
    TechNet Community Support

  • 'System Error' when trying to save Form Manager Registry Settings

    Hi,
    trying to save changes made in the form manager registry settings [Home > Services > Adobe LiveCycle Form Manager > Registry Settings (http://localhost:8080/FormManagerAdmin/registry-cfg-load)], I get an error, which reads:
    > System Error
    >
    The request could not be processed. Please retry the operation. If the problem persists, please contact your system administrator.
    Has anyone had this error as well?
    The system runs fine apart from the jboss log files being crammed with the well-known and pretty annoying
    SpyJMSException.
    Does anyone have an idea how to apply changes to the form manager registry settings, if the web ui does not work? Where are the 'form manager registry settings' being stored? Maybe I succeed in changing the settings manually at least without having to re-install Livecycle...
    Regards,
    Steve

    We are using JBoss 3.2.5.
    Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
    Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

  • Error message trying to update CS6: please close dynamiclinkmanager.exe, what is this?

    Error message trying to update CS6: please close dynamiclinkmanager.exe, what is this?  Thanks

    Refer to this:
    Working with your Operating System’s Tools
    Mylenium

  • Error when trying to save/apply in OAM Console (credential store / wallet)

    So our Admin WLS had accidentally been started as root previously, so we restarted as oracle (after chown -R oracle:oinstall all files), and the Admin Server starts up ok. However, when attempting to save/apply a change within the OAM console, we receive the following error:
    Error in creating the credential store (wallet) : JPS-01047: Cannot persist the wallet. Reason java.io.IOException: java.io.FileNotFoundException: /tmp/pki_data1951273487.lck.tmp (Permission denied).
    And in the log files this also appears:
    <Mar 29, 2013 2:27:01 PM CDT> <Warning> <oracle.jps.idmgmt> <JPS-01520> <Cannot initialize identity store.>
    java.lang.RuntimeException: java.security.PrivilegedActionException: oracle.security.jps.service.idstore.IdentityStoreException: JP-01520: Cannot initialize identity store.
    Any help would be greatly appreciated!
    Thanks,
    Chris
    Edited by: ch**** on Mar 29, 2013 12:29 PM

    We are using JBoss 3.2.5.
    Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
    Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

Maybe you are looking for