Error Message " Unable to start Intel My WiFi Technology"

Setup: Lenovo W520 on Windows 7 Pro
After Lenovo Software Update, the Intel WiDi was updated.  
Then I run the program " Intel WiDi". I received an Error Message " Unable to start Intel My WiFi Technology"
I try to troubleshoot and did the following
1. Uninstall WiDi in the "Control Panel". However, i received an error message from Windows Installer --"Error opening installation log file. Verify that the specified log file location exists and is writable"
Any suggestions on how to reinstall the Intel WiDi

Did resolve it also! But NOT with the LENOVO UPDATE!!!
Take a look at this Intel webpage:
http://www.intel.com/support/wireless/wtech/iwd/sb/CS-031109.htm
it describes what we must do to get it running!
1. I did download the new PROSET WiFi and the WiDi driver
2. deinstall the WIDI and PROSET Wireless drivers from LENOVO
3. then intall the new drivers from INTEL in the order described above!

Similar Messages

  • RoboHelp Error Message - Unable to start Word

    I just recently updated to the full version of 6.0 (I was
    previously using X5 and had the 6.0 Upgrade). When I open the
    RoboHelp Explorer and try to load any of my projects, the correct
    Word document opens at the start, but then the Explorer hangs. If I
    click anywhere, I get the error message, "RoboHelp Explorer was
    unable to start Word."
    Another person has been able to open the same project from
    their machine. I've tried copying the templates from the other user
    (Local Disk > Documents and Settings (user) > Application
    Data > Microsoft > Templates) as well as the Adobe templates
    (Program Files > Adobe > RoboHelp 6.0 > RoboHELP >
    Template > Custom > Custom 1 and Custom 2). I have also tried
    deleting the .RTF files from the project so that they'd have to
    re-generate.
    The other user is still on X5 with the 6.0 Upgrade. Is the
    problem specific to that? Has anyone else seen this error message
    before?

    Hi Kaherns,
    I've experienced the same problem, solved it as described
    below. Not the must beautiful solution, but better than
    reinstalling RH each and every day.
    In my case, the "unable to start Word" problem was related to
    a .dot file mess up created by RH in
    Local Disk>Documents and Settings (user)>Application
    Data>Microsoft>Templates.
    1. Reinstall RH.
    2. In Windows Explorer, open the
    Local Disk>Documents and Settings (user)>Application
    Data>Microsoft>Templates folder.
    3. Make a backup of the fresh, non-corrupted RoboHELP.dot by
    copying (not moving) it to any place on your computer or network.
    4. When RH shows "Unable to start Word", close the project
    and RH.
    5. In Windows Explorer, open the
    Local Disk>Documents and Settings (user)>Application
    Data>Microsoft>Templates folder.
    6. Make sure that hidden files are shown (
    Tools>Folder options>View...).
    7. Delete
    RoboHELP.dot,
    ~$boHELP.dot, and
    ~$Normal.dot.
    8. Copy the backup RoboHELP.dot created in step 3 to the
    Local Disk>Documents and Settings (user)>Application
    Data>Microsoft>Templates folder.
    9. Restart Word. If prompted to start Word in safe mode,
    select
    No.
    Now, my RH does this a couple of times per day so I use a
    batch file, instead of copying files manually:
    1. Create a copy of the
    Local Disk>Documents and Settings (user)>Application
    Data>Microsoft>Templates folder (on the desktop, for
    example).
    2. Make sure that the folder contains a non-corrupted
    RoboHELP.dot file and that
    ~$boHELP.dot, and
    ~$Normal.dot are not in the folder.
    3. Insert the below code in a text file and save it as a .bat
    on an easy-to-access place (the desktop, for example).
    @echo off
    rmdir /s /q "C:\Documents and
    Settings\<user>\Application Data\Microsoft\Templates"
    xcopy /s /i "<path to copied Templates folder>"
    "C:\Documents and Settings\user\Application
    Data\Microsoft\Templates"
    4. As RH goes bananas, close RH and then double click the
    .bat file. The corrupted files are now replaced.
    5. Open RH.
    Of course, I take no resonsibility for any problems you might
    run into trying the above.

  • Error message "unable to connect with server. Check wifi connection"

    I started having the error message "unable to connect with server. Check wifi connection" when I attempt to use search function within a certain apps and when I try to download certain magazine (eg. National geographic).  I didn't have this problem with I first started using iPad, and no problems with connectivity when using other apps.  Can anyone help?

    You may not really be connected to your WiFi network.
    Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

    My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
    Unable to bootstrap transaction group 2517: inconsistent crosscheck
    No valid commit checkpoint found
    The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
    Problems were encountered during repair of the partition map
    Error: Storage system verify or repair failed.
    (the same with 2518, 2519 and 2520 transaction group)
    I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

    Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
    Best of luck
    Terry

  • TS4268 What does it mean when I get the error message, "unable to contact iMessage center" when trying to set up iMessages and I click next and it starts verifying and then the error message.

    What does it mean when I get the error message, "unable to contact iMessage server" when I try to use iMessage and after it starts verifying?

    iOS: Troubleshooting FaceTime and iMessage activation
    Apple is not reporting any problem
    http://www.apple.com/support/systemstatus/

  • Starting Adobe Photoshop Elements, the Editor returns the error message "Unable to continue because

    installed photoshop elements 8.0 with Windows 7. Worked excellent till two days ago. I got the error message "Unable to continue because of hardware or system error. Removed programm and re-installed from disk, no results!

    Are you trying to open the Organizer or the Editor?
    Can you uninstall that driver, or re-set Win7 to a restore point before that driver was installed?
    There's also this Adobe troubleshooting document:
    http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-windows.html
    Ken

  • Time Machine error message "Unable to complete backup....."

    I just purchased Time Capsule and attempted to do my initial backup. I had to stop during the middle of the process. When I returned to resume the backup I get the following error message: "Unable to create backup. An error occurred creating the backup directory." Has anyone else gotten this error message? If so, any suggestions on how to fix this. I tried doing everything that Setup Guide suggested with no success.
    After reading some of the posts here, I've made sure that my Time Capsule name is short and without special characters but nothing has worked. Any help would be appreciated.

    My initial backup (350GB on WiFi N 5Ghz wide-channel) seemed like it would take 3 days (which is fine), but after 1 day, I too got that error. I started the backup again and it went for an hour, then the same error. Started again, went for 5 minutes, same error. Now I can't even start it again--I've tried many times and the error is now instantaneous.
    The first time the error happened, the backup seemed to pick up where it left off. After that, though, all progress each time was lost.
    The network itself has never gone down, and the light has stayed green. And the 2Wire DSL router it's attached to seems to be fine as well.
    I'm wiping the drive (with the zero option in the hopes of catching and physical defects early) and will try again tomorrow.
    All software and firmware is up-to-date: I made sure before turning on the Time Capsule.
    Ethernet is not really an option--I'd have to run a long cord though a high-traffic area, and accidents would happen.

  • Error message "Unable to load plug-in type"

    Hi I used plugin registration tool and updated an existing plugin by a new dll.. and then afer that I started recieveing error messages on the CRM on our Dev environment. Error message "Unable to load plug-in type" it was registered for contact entity for
    post create and update but we are getting this error on any entity updates and creates..
    Any help on how to resolve this issue with be deeply appreciated.
    thanks in advance,
    Future MVP

    While this thread is 3 years old, yet I just encountered the same problem about half an hour ago, and I believe this is a bug within CRM Solution Import routine.
    What I had was a plugin which was imported previously. Then, I added new plugin steps and got 'Unable to load plugin type' when registering the new plugin steps I added.
    The solution I have is:
    a. Import just the plugin assembly without the new plugin steps, and publish.
    b. The plugin assembly is now updated with the new plugin class definition. Then add the new plugin steps and import the solution again.
    c. The solution should now be imported successfully.
    What I believe the bug is CRM Solution Import routine checks for the plugin class/type definition in the existing plugin assembly in the server rather than the new plugin assembly in the solution being imported.
    By the way, all solutions are unmanaged. Perhaps, the same bug will not happen in Managed solution.
    HTH anyone else experiencing the same issue.
    Henri

  • HT3275 I continue to get the following error message: Unable to complete back up.an error occurred while creating backup folder. It's a brand new drive. When I attempt to repair it using disk utility I get:unable to repair disk cannot unmounted

    I have been trying to use time machine on a new lacie 2tb usb 2 drive for back up. I continue to get: "unable to complete backup.An error occured while creating backup folder". When I use disk utility to repair I get another error message: unable to repair disk unmountable.
    Help me Obie One Canobie you are my last hope

    I have confused myself with the facts!  Started out keeping track of every step and every variable but have sort of lost it as we progress here.  First I quit all applications then swapped connections between mouse port and backup disk port to influence possible bad connections question.  Changed power outlet receptacle for the backup disk. Disabled the put-the-HD-to-sleep option.  Then powered down the computerator.
    Next started up computerator.  Turned Time Machine ON  and experienced multiple successful backups!  Then I started up a few applications, Mail and Text Edit (but not Safari so far).  Had a few more successes.  After each backup, I used Disk Utility to verify the backup disk is still OK.  This because the error about unable to unmount the backup disk seems to go hand in hand with Disk Utility finding the backup disk to be bad.
    Put computer to sleep for the night.  Upon starting up in the morning, and before doing anything else, I did a backup disk verification... BAD!   Did a restart and verified the backup disk... OK.
    Did a few    Sleep-bad, Restart -OK    repetitions.
    It seems consistent:  Sleeping the computer apparently messes up the backup disk but doing a Restart "repairs" it.
    =============================
    Now then, I don't understand everything I know here.  Methinks that maybe keeping the HD from sleeping during lulls in activity has allowed successful backups through the day but manually putting everything to sleep for the night causes a return to the problem of spinning-back-up-too-slowly (which was explained earlier).  Is there any truth in this?
    I may abandon this Seagate thing for something more compatible.  What's out there that we know works reliably for us?

  • I am trying to download Adobe Flash Player 10 and i keep getting an error message Unable to load a G

    I'm trying to download Adobe Flash
    Player 10 and i keep getting an error message  "unable to load  GUI" i am currently using
    Windows XP Professional   is anyone able to help me?  I am almost 6
    5 and have a very limited knowledge of computers!!!!!!!!!

    Hi Terry, A post is the message that anyone has just typed in. When you replied to me, that was your post. I am replying to you so this is my post. Think of it as sending an email or mailing a letter at the "post" office.
    Now right at the top of the last post (message) you sent me is a Post#, then the date and time and under that the thread subject "Re: I am trying to download Adobe Flash Player 10 and I keep getting......
    The first time that you posted, you described your problem. The next post after that is #1 and so on.
    The Adobe Flash Player forum works very much like email except there are a lot of "threads". A thread is what each message you see is called. Everyone that registers can start their own thread (subject). Then other people see it and can post to your thread and try to help you with your problem.
    You did pretty good, you registered, and you started your first thread
    Now do you feel somewhat more relaxed?  Hope so.
    Take a look now and see if you can find the Post# and etc that I described above.
    Thanks,
    eidnolb

  • Ios 5.1 OTA update gives error message ( unable to check for update - an error occured while checking for a sofware update ), can anyone help ?

    i am trying to download the latest ios 5.1 but the OTA update gives me a error message ( unable to check for update - an error occured while checking for a sofware update )
    the same thing happens in my ipad too.

    Thank you! I've been trying all day to get this to work! and finally i found the answer!
    amensistech wrote:
    I found a fix for this.
    Go to Wifi    Settings and then select your Wifi Network. Tap the blue arrow to go into Wifi settings and then select the DNS tab.
    Set the DNS to 8.8.8.8 and then go back to the software update page.
    This time it shall work.
    I tried it on an iPad 1 running iOS 5.0.1 but I am sure this shall help.
    Do rate me and reply if it works.

  • Since upgrading to FF 4, I have constant crashes (updating graphics drivers did not help). now all my bookmarks are gone. When I try to restore them, I get error message: "Unable to process the backup file".

    Since I "upgraded" to FF 4, I have constant crashes (I tried updating my graphics drivers--it did not help) and now all of my bookmarks have disappeared. When I try to restore them, I get this error message "Unable to process the backup file". I have lost years of bookmarks...please help.
    I am using Windows XP, SP 3 if that matters.

    I am also unable to restore any of the backups of the bookmarks, both automatic backups and two backups that I created manually. Since I was able to restore backups before, and since no changes have occurred to these backup files, the problem must be with Firefox.
    Right before my bookmarks disappeared, FF crashed and I accidentally started FF 3.5. When I saw what I did, I ended the Firefox process and started FF 4. That's when all my bookmarks were gone and I discovered I couldn't retrieve any backups. I did note that an add-on was updated when I restarted FF. Maybe that's the problem. Does FF have a Safe mode?

  • I'm unable to deauthorize my computer.  Getting an error message "Unable to erase authorization.  Please try again after some time."

    I'm unable to deauthorize my computer.  Getting an error message "Unable to erase authorization. Please try again after some time."

    ok, please try below steps,
    1. Quit ADE.
    2. Choose Start > Run.
    3. In the Open text box, type regedit and then press Enter. The Registry Editor opens.
    4. In the left pane of the Registry Editor, locate the following registry key:
         HKEY_CURRENT_USER\Software\Adobe\Adept
    5. Right-click the Adept key and choose Delete.
    6. In the Confirm Key Delete dialog, click OK.
    Your authorization will be deleted.
    ADE will be deauthorized now.
    Now Authorize ADE again.

  • All CX traffic dropped on data plane with error message 'Unable to create policy params (policy-params-failed)

    Problems with CX dropping all traffic - error message: Unable to create policy params (policy-params-failed) seen when issuing cli cmd show opdata framedrop on CX.
    Data hits ASA Service Policy and is redirected to CX, but no traffic is passed (user experience is timeout in browser).
    Problem started after SW upgrade - present running versions:
    ASA version: 9.1.5(21)
    CX version: 9.3.3.1 (13)
    Have tried to disable all policies and create a 'permit any any' policy, which at present is the only activve policy - still same problem.
    Any suggestions?

    If i am using 11G andrtp is 11g but on rtp side if they configure SSL, is it mandatory to do it from our side also?No it not mandatory to enable SSL at your end however you have to configure identity and trsut at your end.
    Any update on my regular question(The main forum question)?You mentioned that you are posting message from 10g to 11g and as per log you are sending it to URL - https://dev-nog.server:443/b2b/transportServlet
    So few things which I see as a problem are-
    1. You should use URL https://hostname:soa_server_ssl_port/b2b/httpReceiver instead of https://dev-nog.server:443/b2b/transportServlet
    2. SOA server SSL port should be enabled (SSL should be enabled on SOA server)
    3. You should configure wallet at 10g side to contain trust cert of 11g server
    Regards,
    Anuj

  • Error message "Unable to lock resource channel ' BTS '"

    i have a solution which use Biztalk 2010 and Dynamic AX 2009. recently the Biztalk server always raise error:
    Error message "Unable to lock resource channel '<BTS>'".
    the Biztalk can not receive message from Dynamic AX and the message in queue of Dynamic AX also can not be sent out. what i know to do is that stop biztalk server and delete the lock data from Dynamic AX,then start biztalk server.
    what i want to know is why it happen? is it a Bug? how can i solve it?

    Hi,
    There is a hotfix available to fix this issue, which updates the AX BizTalk Adapter and Schema assemblies.
    If you are running Microsoft Dynamics AX 2009 RTM (Build v5.0.593.x), the fix is included in AX 2009 RTM Hotfix
    Rollup 4 Kernel.
    If you are running Microsoft Dynamics AX 2009 Service Pack 1 (Build v5.0.1000.52 or v5.0.1500.x), the fix is included in AX 2009 SP1 Hotfix
    Rollup 6 Kernel.
    NOTE: To
    check the version of the AX server version in use, find AX32SERV.EXE on your AOS servers, and chek the file properties.
    For detailed steps refer:
    https://social.msdn.microsoft.com/Forums/en-US/f4633ce4-7c77-402b-8b9c-6669ff392077/error-message-unable-to-lock-resource-channel-ax-channel-name?forum=biztalkr2adapters
    Rachit

Maybe you are looking for