Error message: USB device was drawing too much power
I get this message whenever I plug anything into the USB port on the left side of my Air. It works fine when I try using the port on the right side. Do I need to send it in, or can I fix it?
Details: It doesn't matter if I am connected to power or not. Most recently, the devices that got the message are a Cruzer flash drive and the cable for my iPod (without the iPod connected to the other end). I only ever use one port at a time, so nothing else is plugged in.
If it's multiple peripherals on the same side (port) of the machine then it's most likely a hardware issue that will require you to bring the machine in for service. Out of curiosity, do you have USB peripheral/device that has an optional A/C adapter that you can connect? Such as "desktop" grade external hard drive? Also, is the port actually disabled when that message appears? I've seen some machines display that message but not actually disable the port.
Still, it's probably time to bring it in.
Similar Messages
-
I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."
I don't have anything else plugged into my MBP, so I am confused as to what's going on. This problem has never happened before. MBP is less than a year old - about 9 months old. HELPGet a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
Error message (Because a USB device was drawing too much power)
Hi Everyone,
Bought recently a new macbook pro 13 inch with Retina display with 120 GB flash drive.
Connected a non-apple CD drive to my macbook and after that started receiving this message: "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
initially I was receiving this message after I switch on my macbook but now after every 30 seconds this message pops up although I never connected anything to my macbook through its USB ports.
Will highly appreciate for your help on how to get rid of this problem.
Regards
HomayunTry resetting the SMC
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
Hi
does anyone know how to fix the message on my iMac:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
This is a brand new machine and did not have anything attached to the USB ports"
Thanks for any helpIf you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.
-
can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?
Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
"Because a USB device was drawing too much power from your computer..." error withOUT any USB device
Hi,
I am getting this error since recently when I am using my MBP:
"Because a USB device was drawing too much power from your computer..."
The 'funny' thing: there is no USB device attached to the computer (only power and monitor cables).
Why is this happening and what could I do about it?
Appreciate your ideas?It's probably an internal hardware fault, but you can try this:
Intel-based Macs: Resetting the System Management Controller (SMC) -
I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." CAN SOMEONE PLEASE HELP!
The rest of the message in the pop up window says "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."
-
I have a new iMac 27" and just plugged in a Apple USB superdrive and get message, "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I am trying to load Office mac2011 what to do?
If you just bought the iMac and the Sjuperdrive take the superdrive back and get a refund. The by any other brand external DVD drive that connects by USB and try that. Most come with a Y USB cable to allow you to connect to 2 USB ports to supply enogh power to the drive IF Needed.
Or take both back and get a refund on both, you have 14 days to return it no questions asked, and buy another iMac and some other brand external DVD drive. -
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled?
What do I do?Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use. One symptom of a bad Lightning cable is the message you are getting.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
i fix my iphone 5 to syn with my macbook in begging is ok after i have message in screen ,Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled
Unplug whatever other devices you also have plugged into USB, and try again. Better not to plug the iPhone into a USB hub.
-
I keep getting this mesage : Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
I need to charge my phone but it's not letting me!! Please help!Solution may be found if you search in the "More Like This" section over in the right column and in the article - http://support.apple.com/kb/HT1151.
-
Because a USB device was drawing too much power from your computer - bla, b
In the last week or so, my iMac (Intel CoreDuo) started displaying an error message every 30 seconds saying "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled", followed by some other useless "explanations" (which BTW can't even be copy/pasted). This has happened before (for about a year now) at every startup, but that was more acceptable; now that the message comes every 30 seconds it renders this machine unusable.
I tried it with or without any USB accessories attached, with or without powered hubs attached, I reset the PRAM and SMC and reinstalled the OS twice. The only option I have left is to trow this machine out and buy a new one (believe me, it's not going to be a Mac).
This shows not only the lack of quality of the hardware (crappy logic board and USB ports) but also a complete disregard for the annoyance these constant popping messages create to the end user when designing the OS. Just while writing this message I had to press the OK button about 10 times. It's AWFUL!!!Hi cimula. before you turn to the extremes have you tried reinstalling snow leopard. maybe you had a problem occur when it was originally installed and is missing a driver or something. also take it to an apple store if possible. take everything needed to run the imac and show one of the geniuses the problem and 90% of the time if you are nice and calm they will gladly help and diagnose the problem even if it is out of warranty. no promises it will be free it could be a hardware malfuntion. just dont force your self back to pc once all of the problems are gone you will love it again. i switched from pc which i had been using my whole life after a friend showed me his macbook and have never looked back. of course once and a while there will an error, problem or whatever but is it worth switching to a pc which has to have a security program running 24/7 to stay alive and sucking up all of the cpu and slowing you down? hope i am helping Dean
-
When I plug in my son's iPad I get this message "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I only have one charger for this iPad all my other chargers are for iPhone 4s. I have pluggerd it in different outlets around the house and the iPad will not charge. When I plugged it on my lap top to back it up it gave me the warning message. HELP!!
I have the same problem on my Air. The message first came up while my iPhone was connected to it for some time. Since then, it pops up ALL THE TIME, whithout anything being connected to the USB port, at what appear to be random intervals that vary between about one hour and a few seconds. I have tried resetting the SMC and the PRAM, but no results. A quick search revealed that thousands of users are facing this problem, but Apple has yet to provide a solution. Please help!
-
Because a USB device was drawing too much power problem
This message keeps popping up even when I have nothing plugged in. I have tried restarting and checking for viruses but there is none and the message still shows up. Now I can't even plug things is the USB port because its disabled. Please help.
this is the message "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
Maybe you are looking for
-
URGENT: Error while invoking soap-based web service from BPEL process
I am trying to invoke a soap-based web service deployed in a different OC4J container but on the same iAS middle tier install as the BPEL server. The deployment is successful. I am running 10.1.2 BPEL server. But invoking a process throws the followi
-
Why is the display on lg 23mp75 different when macbook closed or open?
When I connect the 2008 Macbook with OS X v 10.9.5 with LG 23mp75 monitor, the display on the monitor doesn't fill up the whole monitor but leaves 1" spaces on the left and right each. But when I close the Macbook, the display fills up the whole mon
-
Experts, We are in the processing of migrating a Co Cd from Non-SAP system to SAP System and we were planning to take care of the tax thing manually for now and then have it automised. However it looks like when you are doing FB60 - You can enter the
-
Captions (in Organizer): how do I display them for easy editing?
Hi All, In PSE5, I was able to easily add/edit a caption for any photo while working in the Organizer. It would display a edit box for easy viewing/editing of the caption below each picture. But PSE7 seems to no longer have that feature. Does that me
-
Business catalyst premium partner program
Has the Business catalyst premium partner membership been changed, I can't find any references to it anymore. If so what changes have been made? and how do they affect normal members?