Error Message, user exits, and editing disabled problem.

HEllo I recently had an assignment where I have to create a user exit with an error message. I had no problems with the error message but after an error occurs, with this line:
<b> MESSAGE ID 'ZSD' TYPE 'W' NUMBER '002'.</b>
the fields have become disabled and there seems to be no way to enable the fields for changing. Is there a way to fix this. Thanks people and take care!

Oh, TYPE E, when issuing an error message, all fields are disabled unless you tie it to a field or group of fields. This is commonly done by using the CHAIN...ENDCHAIN statements in the PAI of the screen. Do you have access to this? I assume that you are issueing the message from within a MODULE, right? You are probably calling this module in the PAI flow logic of the screen. You will need to do something like this.
Here P_BUKRS is the screen field and CHECK_BUKRS is the module where you are checking the value and issuing the error message. Using the CHAIN, you can tie other fields to the check so that they are also enabled when the error message is issued.
CHAIN.
field p_bukrs module check_bukrs.
ENDCHAIN.
Regards,
Rich Heilman

Similar Messages

Keep getting error message "user name or password for aol is incorrect". I have reset both username and password and still can't get my mail. This problem only seems to exist in the evening.

Keep getting error message "user name or password for aol is incorrect
". Have reset both and problem still exists. Problem appears to be in the evening hours only.

reset the password to re confirm that that isn't the issue

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12. A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. Without this you won't see the AppData folder in C:\Users\username\
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes.

Message error on user-exit MV50AFZ1

Hi!
I need to send a message error on user-exit MV50AFZ1 (VL01N), but I can't, because when I use BAPI_DELIVERYPROCESSING_EXEC for create deliveries, it will abort my program.
My program try to create many deliveries together, when occurs a message error, I don't know what order is the problem!!
Thanks,
Tatiana

Hello.
In the exit, use a condition like:
IF sy-tcode EQ 'VL01N'.
MESSAGE E000(...)
ENDIF.
This will avoid the error in BAPI execution.
Regards,
Valter Oliveira.

During sync, itoons error message "User's iphone cannot be synced. You do not have enough access priviledges for this operation." Never happened before, any ideas what to do? Checked and new computer is authorized. Greg

During sync, itoons error message "User's iphone cannot be synced. You do not have enought access proviliedges for this operation". Never happened before, any ideas what to do? Checked and new computer is authorized. Greg

I hope this helps. Not the easiest fix, but I suspect it will solve the problem.
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/itun es-privileges-error-with-windows-7/d616e06f-ecdd-4d34-8d7a-a9936a91ad6e

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

When i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!

when i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!

Try:
iOS: If you can't back up or restore from a backup in iTunes

I downloaded several tv shows on my computer and attempted to drag and drop to my iPod touch. I received an error message indicating that there was a problem syncing to my iPod. What steps should I take next? This has never happened before.

I downloaded several tv shows on my computer and attempted to drag and drop to my iPod touch. I received an error message indicating that there was a problem syncing to my iPod. What steps should I take next? This has never happened before.

Force Quit .
Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select the Safari if not already.
Press Force Quit button at the bottom of the window. Wait.
Safari will quit.
Relaunch Safari holding the shift key down.
http://www.thesafemac.com/fbi-ransomware-virus-rampant/

Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do no

Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do not get an installation screen or a chance to enter the Licence no.

Use another browser.
Mylenium

Help with BDC, user exits and BAPI

Hello all:
1) I posted a question before about BDC documentation and people sent me lot of helpful material. Thanks to all of them. I am very new to ABAP coming from VB background and wondering if someone can tell me how to practice one simple BDC program starting from scratch. What do I first need to do to get started? I have Mini WAS 6.20 test version and like to practice BDC programming.
2) What are user exits and BADI and can anyone provide some documentation and sample code if possible.
Thanks everyone in advance.
--Mithun.

Hai Mithun Dha
Go through the following Documentation & Example Code
Just check these links.
Diff. between LSMW & BDC?
BDC SESSION
CALL TRANSACTION
CALL DIALOG
What is BDC or batch input
The Batch Input is a SAP technic that allows automating the input in transactions. It lies on a BDC (Batch Data Commands) scenario.
BDC functions:
E BDC_OPEN_GROUP : Opens a session group
E BDC_CLOSE_GROUP : Closes a session
E BDC_INSERT : Insert a BDC scenario in the session
E The ABAP statement "CALL TRANSACTION" is also called to run directly a transaction from its BDC table.
It runs the program RSBDCSUB in order to launch automatically the session. The session management is done through the transaction code SM35.
The object itself is maintanable through the transaction SE24.
BDC methods:
Method
Description
Parameters
OPEN_SESSION
Opens a session
SUBRC (Return Code ? 0 OK)
SESSIONNAME (Session to be created)
CLOSE_SESSION
Closes a session
None
RESET_BDCDATA
Resets the BDC Internal Table...
None. Normally, for internal purposec
BDC_DYNPRO
Handles a new screen
PROGNAME (Name of the program)
DYNPRONR (Screen Number)
BDC_FIELD
Puts a value on the screen
FIELDNAME (Name of the field)
FIELDVALUE (Value to be passed)
CONSTRUCTOR
Constructor - Initializes NO_DATA
NODATA (No data character). The constructor is called automatically when the object is created.
RUN_SESSION
Launches a session with RSBDCBTC
None
CALL_TRANSACTION
Calls a transaction with the current BDC Data
MODE (Display Mode)
UPDATE (Update Mode)
TCODE (Transaction to be called)
BDC_INSERT
Inserts the BDC scenario in the session
TCODE (Transaction to be called)
BDC techniques used in programs:
1) Building a BDC table and calling a transaction,
2) Building a session and a set of BDC scenarios and keeping the session available in SM35,
3) Building a session and lauching the transaction right after closing the session.
BDC using Call Transaction
BDC using Call transaction involves calling an SAP transaction in back ground from within the ABAP
program. The process involves building an Internal BDC table containing the screen information needed to
execute the required transaction and then passing this to the Call transaction command (See code example).
The full procedure for creating a BDC program is as follows:
What is the difference between batch input and call transaction in BDC?
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
BATINPUT/DIRECT INPUT
A: Batch-inputs can not be used to fill the "delivery due list" screen because it is not a dynpro. This is a standard SAP report. A SAP report (check with "System -> Status") may be called using SUBMIT sentence with the appropriate options . It is preferred to call a report than create a Batch-input program.
GO THROUGH THIS LINK
http://www.guidancetech.com/people/holland/sap/abap/zzsni001.htm
check with this code
include bdcrecx1.
tables : mara.
data : begin of it_mara occurs 0,
matnr like mara-matnr,
mbrsh like mara-mbrsh,
mtart like mara-mtart,
maktx like makt-maktx,
meins like mara-meins,
end of it_mara.
start-of-selection.
perform upload_data.
perform open_group.
loop at it_mara.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
it_mara-matnr.
perform bdc_field using 'RMMG1-MBRSH'
it_mara-mbrsh.
perform bdc_field using 'RMMG1-MTART'
it_mara-mtart.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
'X'.
perform bdc_field using 'MSICHTAUSW-KZSEL(02)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'MAKT-MAKTX'
it_mara-maktx.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
it_mara-meins.
perform bdc_field using 'MARA-MTPOS_MARA'
'NORM'.
perform bdc_transaction using 'MM01'.
endloop.
perform close_group.
*& Form upload_data
text
--> p1 text
<-- p2 text
FORM upload_data .
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'c:\mat_bdc.txt'
FILETYPE = 'ASC'
TABLES
DATA_TAB = it_mara.
IF SY-SUBRC = 0.
SORT IT_MARA BY MATNR.
ENDIF.
ENDFORM. " upload_data
flat file structure is
PRANIT_011 CCOUP This is Testing material kg
PRANIT_012 CCOUP This is Testing material kg
PRANIT_013 CCOUP This is Testing material kg
PRANIT_014 CCOUP This is Testing material kg
PRANIT_015 CCOUP This is Testing material kg
when your selecting views
this particular material will belongs to Po/Sales or some other areas .
when you select basic 1 --it gives description
select basic 2 -- it gives tax ,amount, base unit of measurement
BDC TO BAPI
The steps to be followed are :
1. Find out the relevant BAPI (BAPI_SALESORDER_CHANGE for VA02).
[for VA01 use BAPI_SALESORDER_CREATEFROMDAT2]
2. Create a Z program and call the BAPi (same as a Funtion module call).
2. Now, if you see this BAPi, it has
-> Importing structures.
eg: SALESDOCUMENT: this will take the Sales order header data as input.
-> Tables parameters:
eg: ORDER_ITEM_IN: this will take the line item data as input.
Note :
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data
Possible UPDATEFLAGS:
U = change
D = delete
I = add
Example
1. Delete the whole order
2. Delete order items
3. Change the order
4. Change the configuration
Notes
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.
For further details... refer to the Function Module documentation for the BAPi.
For User Exits
User Exits
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project,
and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
You are not allowed to enter a name for the subscreens command field
You are not allowed to define GUI stauses
You are not allowed to enter a value for Next screen
The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules.
These function modules belongs to the same function group as the subscreen Subscreens are edited with transaction CMOD.
When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next
time you display the calling screen
The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu
entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule.
The code for the function module is writeen by the developer. You are not writing the code directly in the function module,
but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements.
Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only
be used i 1 project. If the enhancement is allready in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
Have look at this links
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf
http://www.sapgenie.com/abap/ole.htm
http://help.sap.com/saphelp_46c/helpdata/en/59/ae3f2e488f11d189490000e829fbbd/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf
Creation of Field Exits
Step by step procedure for creating Field Exits
There are eight steps to creating a field exit:
Step 1: Determine Data Element
Step 2: Go To Field Exit Transaction
Step 3: Create Field Exit
Step 4: Create Function Module
Step 5: Code Function Module
Step 6: Activate Function Module
Step 7: Assign Program/Screen
Step 8: Activate Field Exit
Step 1: Determine Data Element
- Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
- An easy way to determine the data element associated to a particular screen field is to:
Go the appropriate screen.
Position the cursor in the appropriate field.
Press eF1f for field-level help.
Click on the eTechnical infof pushbutton (or press eF9f) on the help dialog box.
On this Technical Information dialog box, the data element will be specified if the field is 'painted' from the ABAP/4 Dictionary.
Step 2: Go To Field Exit Transaction
- The transaction to create field exits is CMOD.
- You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
- From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
- After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
Step 3: Create Field Exit
- From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
- After choosing this menu path, a dialog box will prompt you for the appropriate data element .
- Enter the data element name and click the eContinuef pushbutton.
- Now, you will be able to create the function module associated to the data elementfs field exit.
Step 4: Create Function Module
- You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the eContinuef pushbutton.
- In the eFunction modulef field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
FIELD_EXIT_<data element>
- You can add an identifier (an underscore followed by a single character ).
- The first function module for a data elementfs field exit must be created without an identifier.
- To create the function module, click on the eCreatef pushbutton, choose menu path Function module -> Create, or press eF5f.
- After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing eEnterf, you will be able to go ahead and create the function module.
- Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
Step 5: Code Function Module
- From the function modulefs attributes screen, click on the eSource codef pushbutton or choose the Goto -> Function module menu path to the code of the function module.
- Here you will add your desired functionality for the field exit.
- Remember that field exitfs function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
- You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
Step 6: Activate Function Module
- After coding the function module, you must remember to activate it.
- Use the Function module -> Activate menu path to activate the function module.
- At this point, you can return to the field exit transaction.
- You should be able to 'green arrow' back to this transaction.
- When you return to the field exit transaction, you will see an entry for the newly created field exit.
- At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
- Also, the field exit will not be triggered yet because it is inactive.
Step 7: Assign Program/Screen
- This step is only needed if you want to make a field exit local.
- To make a field exit local, select the field exit and click on the eAssign prog./screenf pushbutton.
- In the dialog box , indicate the appropriate program name and screen number.
This information indicates that the field exit is local to the specified screen in the specified program.
- In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the eFld. Exitf field.
- If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
- If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
Step 8: Activate Field Exit
- The field exit must be active for it to be triggered by the system.
- Activate the field exit by choosing the Field exit -> Activate menu path.
- After assigning the field exit to a change request, its status will change to eActivef and it will be triggered automatically on the appropriate screen(s).
NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
Thanks & regards
Sreenivasulu P

Difference between bex user exit and macros in functionality?

Hi all,
I need to create a report on material master data. I created an infoset on 0material and 0mat_plant. In the requirem
ent, I have a report containing different material numbers followed by attributes in each row. the final column in each
row should be calculated using logic. the logic involves comparing different row values and arrive at final conclusion.
the logic comprises of large number of if conditions. so should i use bex user exit or excel macros?
what is the difference between user exit and macros in funcitonalilty?
is there an issue transporting the macro to Prod for end users to use?
any performance criteria?
Any how to documents ..will be of a lot of help
plz send them to [email protected]
Message was edited by:
ravi a

Hi,
Macros offer a powerful and flexible way to extend the features of MS Excel. You can either create a macro using VB code or Record a macro. Use Alt+F11 for creating macro using VB code.
You can refer to Microsoft help site or this link for more details:
http://www.taltech.com/support/sw_tricks/exmacros.htm
User-exits are empty subroutines that SAP Developers have provided for you.You can fill them with your own source code.Technically this is a modification.Customer exits are nothing but a include in customer name space will be provided in the function module which starts with CALL CUSTOMER.You can fill them with your own source code.Technically this is an enhancement.
look into following links for procedure to find and use user-exits transaction for finding user-exits is 'SMOD'
http://www.sapbrain.com/TUTORIALS/TECHNICAL/user_exits_tutorial.html
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

Error message while creating or editing a report

Hi, we acquire the Crystal reports Ver 2008 type full, and this moment we are having an error message while creating or editing a report, the message suddenly appears saying:
Crw32.exe has enconutered a problem and needs to close.
Is there a patch available or what can we do?
Thanks.

Hi Lucus,
This is to general an error, 1st try to reinstal the software, make sure you have admin rights on the PC, and try again. If you still get the error, I would call the support number, and let them help you out. You may need to know, the type of PC or server the software was installed on, the current os, available memory... etc For now, I would go to windows (If that is what you are running ) and re-install or repair the software.

ITunes - When launched comes up with error message - User at wits end

Hi - When launched ITunes comes up with error message below
"iTunes has encountered a problem and needs to close. We are sorry for the inconvenience" - and then wants to send an error report off to Microsoft
I have so far been through the bulletins and - deleted high and low filters using regedit , disabled virtual drives (which bought me CD drive back to life hurrah), reinstalled several times both Quick Time and I Tunes (seperately and together) including using Windows Install Clean up and the methodical Uninstalling and full deletion of Files - HELP - any ideas !! - forgot also disabled Norton through these steps

Try this, it took me 5 days but I eventually got it to work.
1. Scanned my hard drive for viruses. 1 was found & fixed, Spybot search and destroy, this is a freebee of the internet. Reboot PC
2. Removed all software having to do with quick
player & itunes - including ipod updates. Reboot PC
3. Downloaded Quick player via the stand alone, you can get this from http://www.apple.com/quicktime/download/standalone.html. Reboot PC
4. Dowloaded Itunes from the itunes support site.
Then when you are asked to update say no. Reboot PC
This should then work.

User Exits and VOFMs

I am looking for a document that suggests coding practices and rules that should be followed in User Exits and VOFMs in SAP R/3. Like value the variable XKWERT with the desired value in Pricing Condition Formula VOFMs, or never read an SAP defined internal table into the header line. Things like that. Does any one know of such a document?

Hi, this may help you.
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
VOFM is the transaction where you can maintain Requirement routines, which are assigned through cusomization.
To create a routine you need access key & routine no. starts with "9".for ex. 901,902 etc.
one important thing to note that even if you have some syntax errors inside your routine, it will get activated without errors. So, you need to do Main Program check before activation.
Refer to SAP Note no : 327220,381348,156230.
goto VOFM tcode for wrting the Routines
from menu Requirements-> pricing
You can create the pricing related routines here
Use the Number from 900 only
take the acess key and try to copy the existing routine and change the code to your requirement and keep a break point and see
Activate it before execution
Reward If Helpfull.
Regards Madhu.

I keep getting this error message that says "There is a problem with this windows intaller packaage.a program required for this install to complete could not be run.contact ur support personnel or package vendor" what does it mean?

I keep getting this error message that says "There is a problem with this windows intaller packaage.a program required for this install to complete could not be run.contact ur support personnel or package vendor" what does it mean? and how do i fix it?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Error Message, user exits, and editing disabled problem.

Similar Messages

Maybe you are looking for