Error message "user is not a member of the remote users group"
user is member of the remote users group on PC, I did not think about adding domain remote users to local pc remote group I will try that, yes domain login works fine locally and also remotely using vnc over Pertino, just not through rdp over Pertino
I have a user that win 7 pro PC died replaced with win 7 pro PC, user uses RDP from home Win 7 PC over Pertino to access work PC.
User is a member of domain Remote users group, user was added to PC remote settings as an authorized user, user gets error everytime not a member. This was working fine with old computer for several months until motherboard died, cannot understand how new computer setup same way now has issue. User is not an admin of local PC. I am pretty sure this would fix the problem but would like to avoid since he is "one of those users" that love to get into a mess.
This topic first appeared in the Spiceworks Community
Similar Messages
-
Getting error message " You are not authorized to access the migration tool "
One of the users is noticed with error message " You are not authorized to access the migration tool " in SAP Cloud for Customer tenant. thanks
Hello Raj,
It seems that this user does not have proper authorization to perform Data Migration.
You need to go to the WorkCenter View Assignment for this user under his access rights & need to assign him the workcenter "Business Configuration" & under it, also assign him relevant access to Data Migration.
This shall fix the issue & the user shall not get this error while trying to perform Data Migration.
Steps:
1. Go to Workcneter: "Application and User Management => Business Users => Seerach for the suer who gets this error => Edit-> Access Rights => Click on Workcenter view Assignment tab & assign the above mentioned worokcenter access and save."
Let me know for any further queries.
BR
Ankur -
Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2 -
I am getting the error message "you are not a part of the administrator group" when I try and set up my ipad and log in with my apple id. How can I bypass this error message?
Firstly, I recommend to go to Central Administration > Security > Manage the farm administrators group > make sure that your account is listed.
Yes, the account that I log into the server is a Farm Admin account
Secondly, did you do the backup or restore operations with PowerShell command or through Central Administration?
Used to be able to do it thru the CA, now I'm running PowerShell and using the scheduled tasks to run it when needed.
If you are using PowerShell, I recommend to run SharePoint Management Shell as administrator.
I'm able to run the backup with the account that is in the Farm Admin group. as I have that setup as the PowerShell account to run under.
If you are using Central Administration, I recommend to run Internet Explorer as administrator.
I still get this error when I run IE as the log in to the server who is in the build in and the SPS Farm Admin Security group:
You are not a local administrator. You must be a member of the Administrators group on the server that is running Central Administration to perform most backup and restore operations. -
I set up a playlist in itunes and when I try so sync it to my iphone, I get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occurred. Using itunes 10.5.2.11 and Windows Vista 64. Any help? Thanks in advance!
I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!
-
i am getting this for the first time when i sync .iphone 3gs error message itunes could not sync calendars to the iphone because the sync server failed to sync iphone
I have tried the suggestion to reset the sync log to no avail. Anyone have another idea? This just started after I downloaded 4.3.5.
-
I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files, the error message is "could not be opened". The movie's file format isn't recognized. " Any help or are they corrupted?
Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files. -
Error Message : Object could not be scheduled within the specified time interval
Post Author: mohamed elkashef
CA Forum: Publishing
Dear All when i try to run event for daily reports it sometimes take generation status failed with this error message : Object could not be scheduled within the specified time interval so i need to know the reason of failure and how can i fix this error thanks a lotPost Author: nvnaresh
CA Forum: Publishing
Dear jsanzone,
I'm facing the same error even when the server time out is more than the query execution time of the report.By server time out I assume connection time out of WebI report server which I have set to 180 min.But the actual query takes maximum of 5 min.
We are using BO XIR2+SP2.
I scheduled a webI report to get saved in Excel format to an Unmanaged disk location upon a File Event.
We have 3 such reports to be scheduled on the same event.
Expected frequency of File Event getting fired in a day is twice.Scheduling frequency I have set it as every one hour with the file event.
This usually should work fine.
But frequently 1 or 2 of the above 3 instances are getting failed with the following error "Object could not be scheduled with in specified time interval " after being in Running state for few hours(8). Amazingly this is not happening every time. May be once or twice in a week.This works fine after I restart the BO services and the same thing repeats after 3 or 4 days.
Do I need to increase any server parameters?
Why is this happening randomly? -
what to do when a error message says could not be restored because the firmware file is not compatible
Were you updating/restrore via the Restore/update button in iTunes?
Try deleting the existing ufirware file and try again
It is located here:
IPSW file location for Mac and Windows -
I have a 2013 iMac, with OS X version 10.8.5. Have been trying to download OS X version 10.9 (OS X Mavericks) without success; error message "we could not complete your purchase, the product distribution file could not be verified, etc". Please help; TQ
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Database instance: You are not a member of the specified Installer group
Hi,
When I start ./RUNINSTALLER in HP-UX to install oracle, as a part of database instance instalation of SAP, the following message appeared.
"The Oracle Universal Installer Inventory on this system does not exist or is not writable. the possible cause are:
1. The /tmp/orainstRoot.sh script was not executed with root priveleges, or an error occured during execution
2. You are not a member of the specified Installer group"
Mention that I have executed the script by root user without any error.
Requesting your kind help to solve the problem.
Regards
WahidHi,
I am trying to install oracle 9i as required by SAP ECC 5.0. Instance name is PRD as disaster recovery will be tested in that system. In the same time our SOLMAN is running in that system with database oracle 10g. We are planning to run parallel process in same time SOLMAN and DR PRD.
Till now we have done SAP Central instance installation. While trying to install database instance SAP asked to go /oracle/stage/920_64/Disk1/SAP and run the script RUNINSTALLER in HP-UX system for oracle.
To do this I have done the following
a. Logged on the system as oraprd
b. Set up environmental variable
ORACLE_HOEM to /oracle/PRD/920_64
DISPLAY to My work station IP:0.0
and started OS> ./RUNINSTALLER
After some time a window appeared headed by "Inventory Location"
I Specified base directory /oracle/oraInventory and pressed OK.
Then a window asked to run script /tmp/orainstRoot.sh by root user and then press continue
The script run successfully by user root. But when I press continue the following message appeared.
The Oracle universal Installer Inventory on this system does not exist or is not writable. The possible cause are:
1. /tmp/orainstRoot.sh script was not executed with root priveleges or an error occured during execution.
2. You are not a member of the specified Installer group.
Please help me how can I resolved the problem. -
This is a clean install from s disc onto a 3TB GPT drive. This is for testing. I'm not concerned with finding a more practical solution for this installation.
There is no image or answer file involved. But at the "Completing Installation" phase, I receive this error message about an answer file.
Has anyone else expecrienced this problem? The only results I find here are regarding actual imaging with answer files.
EDIT: [Redacted]
EDIT 2: Since this now happens with every single installation of Server 2008 on this system, I feel the need to keep this open and elaborate on my situation.
I originally installed Server 2008 on the 2TB partition of this 3TB drive. The partition type was MBR. I reinstalled it (there was a false alarm for malicious software) since it was a fresh install without updates or anything else installed. And for the
second time, it installed fine.
I decided to make the most of my 3TB drive and try GPT partitioning. So I went into the command prompt > diskpart > ran "clean" on the disk, then "convert GPT"
That is when I tried another install of Server 2008 and received this error message about an answer file.
I decided to convert it back to MBR and get on with what I wanted to test in the first place. So I went into Diskpart again, ran "clean", rand "convert MBR" and started the install. But this resulted in the same error message about an
answer file.
I went back to Diskpart, "clean"ed the disk, ran "convert dynamic" to make sure it was dynamic, then tried the install again, with the same result.
Now, I've tried installing on the disk as GPT, MBR basic and MBR dynamic. I've tried a different installation disc, as well. I got the same result. At this point, I'm going to switch hard drives, but I'm still open to input. Thanks for reading!Hi,
As you swapped the hard disk, whether the same issue occurs again if you redo the same steps?
I asked "OEM or retail" because of this known issue:
"Windows could not parse or process the unattend answer file for pass [specialize]" error message when you perform an in-place upgrade in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2425962
An answer file may already contain in the disc which causes the issue.
If issue still exists you can click Shift + F10 during the installation process to see the log. Check if the installation error for detailed information.
If you have any feedback on our support, please send to [email protected] -
Please help - this morning I tried updating one of my old ipods for my wife (this ipod hasn't been updated in 2-3 years). I plugged it into my pc, it was recognized and the software updated. I created a new playlist and tied to sync the ipod. This ipod had never been used on this pc/itunes since the pc is only 2 years old. When I tried to sync the ipod it stated that it would have to erase all the old songs on the ipod prior to syncing. I clicked ok and it proceeded to wipe out the old ipod and sync the new playlist (~1000 songs). When the sync was complete there were only 6 songs from the new playlist (all purchased this morning from itunes) on the ipod and to my horror all ~10,000 song on my pc in itunes now have a ! next to them. Only my recent purchases from itunes do not. When I click on a song with the ! I get the error message "the song " " could not be used because the original file could not be found." How do I correct this issue - I am scared to hook my ipads or other ipods to my pc for fear of losing everything?!?!? I spent 100s of hours burning the 10,000 songs from my cd collection and do not want to have to do it again.
Any help is greatly appreciated.This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
Sync Error Message: "iTunes could not sync contacts to the iPhone...."
This just started today:
"iTunes could not sync contacts to the iPhone "My Phone" because an error occured while merging data"
Info:
I'm running iTunes 9 and 4.0.1 on my iPhone which is a 3GS. They sync with Google Contacts. I did just install a group contact app called ABCLite (fyi, have no idea if this is related).
I use my contacts a LOT on both the phone and the computer so I really need them to sync! Help!!!
JennHi,
same here - or similar: Installed latest iOS4 and only group in my contacts comes up.
Data do not seem to be lost (phew:-) because when I ring a number, the phone still displays who it is, so the data are there somewhere.
Any help much appreciated. -
Ouch!
Did a Server migration from Server 2003 to Server 2012 R2. Virtualized the Domain controller and a File Server.
Used Robocopy, icacls and takeown to get the permisions and access to work correctly.
One user we will call here Mary is a member of three groups: HR, HRA and Boardroom but when I give a test file Administrators only access she can breeze right in!
I do not know if this was how it worked before the migration but how do I stop it.
Effective permissions appear correct but she just tra-la-la's right on in!
Any ideas?
LiamPlease do this after you verify all permission settings for all the groups the account is associated with. Also, make sure you check the NTFS folder permissions before doing this as well.
Since the same result happens on multiple computers, it is not the profile.
I am recommending you delete the AD account (or rename to backup the account).
It will not effect the users Exchange account, but you will need to link it back to the new AD user account.
You can also delete her profile just to remove it, for the "just in case" scenario.
Don't forget to mark the post that solved your issue as "Answered." By marking the Answer you are enabling users with similar issues to find what helped you. Lewis Renwick - IT Professional
Maybe you are looking for
-
Downgraded Win8.1 to Win7 and now need help to find drivers
So I didn't like Windows 8.1 and downgraded to Windows 7 64-bit SP1, formatting all the drives in the process. Now I don't have some drivers and I'm not sure which ones to download since there are like 2 indentical types of drivers for everything on
-
All-day calendar entries and daylight savings time
Since changing to daylight savings time, whenever I change the date on an all-day calendar entry, my iPad (but not my iPhone) changes the one-day calendar entry to a two-da calendar entry. How do I correct this?
-
just wanna know, if i wanna download all the picture from icloud , do i need to keep both device on wifi or only pc where i will download.
-
Certain flash movies will not play - including Adobe TV movies with Dreamweaver tutorials
For months, certain .swf movies will not play. No error, won't even load the player. I thought it was because of IE8 which I installed several months ago. Now I loaded Firefox and Opera and the movies still do not play in those browsers either. A
-
SampleTank 2 LE from IK Multimedia
Are there any other users on this board who use the Audio Unit version of SampleTank 2 LE from IK Multimedia? This is a sample playback engine used to play certain third-party multisample libraries. It can be used to suppliment the GarageBand softwar