Error Message using CD/DVD Recovery on Satellite A135

Hi Forum:
I try to restore default factory in my Laptop Satellite A135 when finish the process I got a Error Message and press ok and the turn off automaticlly my latop.
NOTE: Only I use the CD/DVD my laptop not have the partition hide any help ??

Hi Again:
Well after a couple hours front in my lap, I solved the problem, only I format the HDD with a Windows Vista OEM and install it, after reboot with the cd/dvd recovery and Woala..!!!! I install the Windows Vista from Recovery CD/DVD I think the problem is in the partition because my HDD say 80 GB but with the CD in the partion show almos 2 HDD.
Any way the important is I can resolved the problem.
Thanks..!!!

Similar Messages

TS1436 keep getting the error message saying " cd/dvd software not found". How do I fix this!?

When trying to burn my playlist, I keep getting error message saying cd/dvd software not found.. I've tried uninstalling and installing itunes over and over.. and I still get the same message . I can burn in Windows media player but not in itunes. Please help!

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

To display a continuos Error Message using BADI

Hi Everybody,
                    There's a transaction that makes use of classes and interfaces to display an ALV grid with input enabled frames and fields. There's a need to display an error message using a specified BADI method, which gets triggered after the user enters the input. The error message is working fine for the first time.<b>But when i'm trying to enter the same input and press enter after the error message, the transaction is getting closed. How can i display the same error message, until and unless the user enters the correct input ?</b> I've tried to trace the control using the debugger after the enter is pressed, but the debugger is also getting closed and the control is coming out of the transaction. Help me out in displaying the error message.

Hi,
Open the interface and go to the Methods tab.
Select the Method and click on Parameters.
In the method parameters, declare a variable
RETURN      Changing      Type     ALM_ME_BAPIRET2_T.
Now, inside your code, declare   DATA : ls_return TYPE bapiret2.
and populate this RETURN table, something like:
        if not ( wa_mara-mtart eq 'SPAR' or wa_mara-mtart eq 'ZMRO' ).
    CLEAR ls_return.
    MOVE 'E' TO ls_return-type.
    MOVE 'ERR_MESSAGE' TO ls_return-id.
    MOVE '999' TO ls_return-number.
    MOVE 'Enter proper error message here' TO ls_return-message.
    INSERT ls_return INTO TABLE return.
    endif.
Then, back in your program, check if this table is empty proceed otherwise, STOP or EXIT.
Regards
Subramanian

Send custom error message using IDoc conversion rule?

Hello,
I am using an Idoc conversion rule in BD79 to load cost centers. In my conversion rule I use a conversion exit function module to concatenate 2 specific characters and sending cost center value together and then this output value placed in the receiving cost center field. This works fine, but now I want to send a custom error message to the idoc and fail the idoc if the sending cost center value is greater than 8 digits.
Does anyone know how to send an error message or update an idoc with an error message using a conversion rule (bd79)?
Thank you,
Rhonda

Hi Rhonda,
Any luck on the below.. i have a similar issue...
Sorry to hijack your thread...

Getting Error Message using Formatted Search

Hi,
I am using formatted search for validating a particular field, and that happens fine. Kindly let me know if I can also display error messages using the same formatted search.
If yes, what am I to include in the formatted search, and if No, please let me know the alternative.
Thanks in advance.
Satish.

Hi Satish,
if you validate the value of a field and intend to rise an error message on detection of invalid values in a separate window or in the status line there is no way to do it with Formatted Searches (as far as I know)!
You could use the following methods as simple workarounds if you don't want to program a solution with the SDK:
1. Solution
You can display the text of an error message in the field you validate; of course, the invalid data then is overwritten with your error message, but you could construct the message from fixed text parts concatenated with the data found in the field.
Be sure to save the original data of the field in your query before you do anything else. This way you sustain the field data in case the data is valid!
Example:
DECLARE @save AS ....
SET @save = $[xxxxx]
IF $[xxxxx] test on invalid data
SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
ELSE
SELECT $[xxxxx] -- no error - sustain valid data
END
2. Solution:
You define a sepate User Defined Field (UDF) for potential error messages - that's the way I often programmed it for our own applications. Suppose that the Formatted Search is connected to this UDF and the field to validate is field 'xxxxx'. The Formatted Search is triggered (auto-refresh) on change of field 'xxxxx':
IF $[xxxxx] test on invalid data
SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
END
May be that there are minor syntactical errors or missing type conversions in the code above - but I hope it gives you an idea on how to solve your problem without SDK programming!
Good luck!
Frank Romeni

How to show error message using java.awt?

How to show error message using java.awt?
Which is the class corresponding to the JOptionPane?
Or I need to use Frame ?

No, JOptionPane is swing!
You would have to create your own frame, put your message in it, then show it.

Satellite Pro A300D - Error message while watching DVDs

Hi There
I have a problem with my satellite Pro A300-140 running Vista 32-bit OS
Every time I try and watch a DVD I get an error message " Unable to output the video to an external device. Please check the external output setting after ending the application "-I am not trying to connect to anything - I just want to watch a movie !
Any ideas - I did read this was a known problem but I can't re-find the information ?
Thanks

Hi
You should try the new Realtek sound driver from the Realtek page:
http://www.realtek.com.tw/
Furthermore I recommend updating the Toshiba DVD player. It's placed on Toshiba European driver page.
Just one tip; Im using the VLC player. Its free software and very nice
It plays almost all video and audio formats google for VLC player!

Error message when burning dvd

I have a flat panel 17" iMac with a superdrive. I have recently tried to back-up data onto a dvd. When I hit the burn button I soon get an error message. When I eject the dvd and put it back in to play nothing happens and the dvd is ejected only when I open iTunes. On a third and forth attempt the dvd gets spit out without any burn attempt.
Strangely, the first dvd I put in that was not readable on my machine I put in a Windows machine, which appears to read the dvd and I see the folders that I tried to burn, but obviously cannot open the files because it is a Windows machine.
I have read the discussions and dvd issues seem to be rife. I thought I had applecare but it appears it hasn't been registered and this issue is being addressed with apple. So I have not managed as yet to get any apple support.
Can anyone shed any light on my problem?
Thanks
PS: The reason for the back-ups is that I am soon going to upgrade to Tiger. I see from discussions that issues about dvds are rife.

I didn't note the message I'm afraid. However I have just tried to burn a dvd again and got the message 'An error occurred while burning the disc. This disc cannot be used.' I have tried the burn with two different dvds and I don't think the discs are the wrong ones. One was DVD-RW and the other was DVD-R. I recall that on another occasion there was an error number, which might have been 303, but I can't be sure of that figure.
Whilst on burning to disc, I want to make an image of a folder. I follow the instructions of navigating to the folder and click on it but the resulting image is only of the folder and not its contents. Am I doing something wrong here too?
Thanks.

Error message for liveupdate engine COM module - Satellite P100

I have a Satellite P100 using Windows Vista home premium, and upgraded cable internet plans with Optus over the weekend to the Fusion89 plan.
Since then internet has been slow to open (up to 25 seconds when I click on a new tab), and attachments are slow to open from E-mails.
I also keep receiving an error message from Microsoft Windows stating "liveupdate engine COM module stopped working and was closed. A problem caused the application to stop working correctly. Windows will notify you if a solution is available".
I have contacted Microsoft who said they would help me for a fee, but as I have the laptop under an extended warranty, they suggested I contact the people I bought it from or Tochiba. Before I contact Clive Peters soes anyone have any comments or suggestions regarding my issues?
Any assistance will be much appreciated.

Try this:
Go to a Command Prompt and run "CHKDSK C: /F"
Run WindowsUpdate / update Internet Explorer
Try disabling your Antivirus software or Firewall software.
If you installed Optus/connection software, update the software.
Ensure the ISP (optus) proxy settings are correct in IE and the email software.

Error message: "Webcam driver open fail" for Satellite L305-S5875

Problem: Webcam is not working and when Camera Assistant Software is started up, the Error message, "Webcam driver open fail" pops up.
Computer: Notebook Satellite L305-S5875
OS: Windows Vista
In troubleshooting, I have unsuccessfully tried the following: Changed the webcam driver several times, rolled back driver, updated driver, and tried Chicony 2.0 USB driver, and a few other webcam drivers. The webcam initially worked fine, but about a month after installing and using Skype video, the webcam suddenly stopped working and on reboot I got the error message.
I've stopped Skype and Camera Assistant Software at startup and manually start them, as someone suggested this as a solution. I've uninstalled both and reinstalled several times. I've tried one software without the other installed... trying every possible arrangement for a solution, to no avail.
I called Customer Support and John, although very nice and patient, was not helpful. He said he'd research and call back. Didn't.
I've gone to Chicony website to try to find an more current driver than January 07. When I let Windows install the latest from the web, it installs a Microsoft 2006 driver. I don't think it's a hardware issue, as it started acting up after Skype installed. I also tried System Restore, but that didn't work either.
Suggestions?
Thanks,
SteveCo

Thanks Jerry. I spent hours going through the links you provided and tried some of the suggestions looking for a solution. Nothing worked.
I tried uninstalling Toshiba's Camera Assist software and Skype (Skype initially seemed to be the instigator of the problem), completely removing both from the registry, and removing the webcam with Device Manager. Then I made sure Vista was up to date, and then installed the latest Toshiba Camera Assist software from the Toshiba download page. After installation and rebooting, I'm getting the same error message: "Webcam driver open fail."
The webcam used to work, before we installed Skype and used it a few times. From the other posts I've read, it does seem to be a common problem... usually after Skype or another webcam-using software is installed and run.
We have another Toshiba laptop: A215-S4757, that has the same OS and webcam-using programs, and it does not have an issue. Apparently though , after going through all the links on the European message board, you provided, the L305 model is having a problem.
Open for suggestions.
SteveCo

Error message when burning DVDs

Hi, I've been burning DVDs on my computer for over a year. However I'm now getting the following error message:
sense key = medium error
sense code = 0 x 57
Unable to recover table of contents.
I've tried documents and video and a couple of different blank DVD brands...Is it stuffed or fixable. FYI the cd burner is working fine and its reading DVDs Ok as well.
Thanks
Peter

Thanks for the suggestion.
I ran the Onyx on both my machines and still have the same problems.
The PB 1.25 whirls and spits the discs out (any disc).
The iMac 800 now has a new error code since running Onyx.
0x80020022 instead of 0x8002006e
The message reads "communication to the disc drive failed."
I'm going to try one last thing with the iMac. That is using those expensive Apple-made and approved DVD's. I'm using Maxell DVD-RW. Never had a problem with them on the PB, never used them on the iMac. I'm off to the dealer... I'm buying an external DVD burner for the PB- $200 vs. $600... it's a no brainer, just none of the convenience... best, Edward

Error Message When Importing DVD

I used PQDVD to copy several DVDs and have them along with all of my music files stored to an external hard drive.
I have never had an issue adding files to iTunes before, but now I am getting the following error message:
"There is not enough room on "HPNOTEBOOK" to copy all of the requested files. iTunes will copy as many files as possible."
The strange thing is, there is 16gb of free space on my "C" drive and 217gb on my "E" drive.
Does anyone out there have a clue as to how to solve this issue?
HP Pavilion Windows XP

I have answered my own question!
I dug a little deeper, and found that even though I had saved all of my files to my "E" drive, it was still storing the music, videos, etc. on my "C" drives when I added them to my iTunes! I didn't realize this until my free space went from 16gb to 14gb in the time it took for me to post my question!
I have changed the setting so that the files are now being stored and accessed from my "E" drive only!
HP Pavilion Windows XP

Getting error message when burning DVD

I keep getting an error message when I try to burn my DVD in iDVD 08. I have imported the movie in quicktime format from iMovie HD and everything works fine until I go to burn the project. I renders everything else but when it get to the movie it has an error and cancels the burn.

Suggestion: Not a bad idea to test the disc image with apple's dvd player app prior to burning.
Click Here
I prefer to use Toast for burning an image to Dvd-R (verbatim at 4x or slower for best results).
Click Here
Not my personal favorite choice ... however it is possible to burn thru apple's disc utility like this:
Click Here:
Hope these help but if not just come on back.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

Equium A60: I get error message using explorer.exe

Everytime I try to open an image file using Paint or Fax/Image viewer, or I try to drag a file into a folder I get the following error message:
"Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience"
The error report says:
"AppName: explorer.exe AppVer: 6.0.2900.2180 ModName: rpcrt4.dll
ModVer: 5.1.2600.2180 Offset: 000847a6"
Also I cannot open webpages that open in new IE windows. Norton Internet Security 2005 also would not open, but did claim to be active in the background.
Does anyone have any advice for me?
I've tried all the help for explorer.exe problems on helpwithwindows.com but nothing they suggested worked - such as spyware, malaware removal. I've run a few online virus checks - since Norton won't work I had to try the online scans.
The laptop was bought last year, and we've lost the recovery CDs - so if we need them, then where can we get replacements?
Many thanks,
Jonathan

Hi
Well, this sound like a OS software malfunction. It's possible that some registry entries or/and data files are corrupted and damage.
However, the best solution is to recover the OS.
The other possibility is to use the "system restore" tool of Win XP.
Then you can try to roll back the OS to the early point. But if it doesnt work so the new installation is needed.
regards

Error Message using CD/DVD Recovery on Satellite A135

Similar Messages

Maybe you are looking for