Error message: Vista registration has stopped working

Arg.
After a few days use, I get this error:
Vista registration has stopped working.
This comes up each time I restart the computer.
I've tried to search everywhere for a solutin but I can't even find anything about the subject.
Anyone who got any ideas?

Found it out by going Control Panel and open Problem Reports and Solutions.
It was toshibavistaregistration.exe.

Similar Messages

  • ERROR MESSAGE "MACROMEDIA PROJECTOR HAS STOPPED WORKING"

    I am using Windows Vista, and can no longer play any of my
    games. Was able to play before now I get this stupid
    error message: "Macromedia Projector has stopped working." I
    have tried redownloading the games again, tried redownloading the
    Flash and shockwave players, still nothing. HELP!

    I suddenly started getting the same error message and was reaching my wits end in trying to find a solution.
    This may sound bizarre, and you may not have the same situation as I found, but check your system/Windows date setting.
    Somehow, the year on my system had become 2096. I corrected it, and bingo! PSE 8 Editor works again.

  • I am having a problem opening pdf document.  I get error message: "Adobe Reader has stopped working"

    I am having a problem opening pdf document.  I get error message: "Adobe Reader has stopped working" then I get Windows is looking on line for a solution, but then my document closes. I tried uninstalling and reinstalling Adobe Reader XI, rebooted my computer but this did not help.  I get the same message. What to do?

    Can you open Reader by itself?  If so, check if disabling Protected Mode improves the situation [Edit | Preferences | Security (Enhanced)].

  • I just updated iTunes on my dell and now when I try to go to the store I get an error message that iTunes has stopped working and the program closes. Ideas?

    I just updated iTunes on my dell and now when I try to go to the store I get an error message that iTunes has stopped working and the program closes. Ideas?

    I have also retarted twice...

  • Adobe Acrobat X Pro - Error Message : "Adobe Acrobat Has Stopped Working"

    I use Windows 7 - 64bit / CS6 Master Collection that has Adobe Acrobat x Pro.
    When the computer is on for a little while, Acrobat would generate the error message that it has stopped working and then shuts down. Once that error message occurs, I cannot get Acrobat to stay open. It opens the PDF document, stays open for a few seconds then the error message occurs and it shuts down.
    What helps for a short term is to restart the computer. This seems to temporarily remove the error until the computer is on for a while then the error returns.
    This problem repeats. Product repair feature does not work. This has nothing to do with the license, I tried that fix and it made no differnce. I do not have this issue with other Adobe products included in the master collection.
    It seems fruitless and frustrating to send a message to Adobe Support, the run around with pages and links is like smacking walls on every turn, it is obvious Adobe does not want people contacting their support. Service from Adobe for their products is poor.
    I hope that someone here has the answer to the problem. Anyone?

    Ok, here is the update.
    The link: http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html , leads to a webpage that says to download a fix ZIP file named: "Acrofix.ZIP". It contains the file "acrofix.exe".
    I did use this "exe" file about 2 months ago and it did nothing to fix the issue. I used it again today, because the same issue of "Adobe Acorbat has stopped working", occurred again and again it did not work, the problem of "Adobe Acrobat stopped working" presists. Again the only work around, which is temporary, is to reboot the computer.
    So far these do not work:
    Relicensing or Registering the Licence
    Acrofix.exe
    Anyone else have an answer? - or am I the only one suffering this really annoying issue?

  • I am having error message of "firefox has stopped working".i unstill and delete folder in my directory adn i again reinstall but its still showing same error

    I having the error message of "Firefox has Stopped working" and having following problems list out in the problem list text area is
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: firefox.exe
    Application Version: 20.0.1.4847
    Application Timestamp: 51650aee
    Fault Module Name: KERNELBASE.dll
    Fault Module Version: 6.1.7600.16385
    Fault Module Timestamp: 4a5bdaae
    Exception Code: c0000005
    Exception Offset: 00007b69
    OS Version: 6.1.7600.2.0.0.256.1
    Locale ID: 16393
    Additional Information 1: 59d2
    Additional Information 2: 59d28f4851ee3e61e3aa57edc696ac9e
    Additional Information 3: 38b6
    Additional Information 4: 38b6ae8359371108855a2a4e84f0ea47
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
    i uninstall and delete the mozilla firfox in my directory and reinstall tha lastest version but its still showing the same error message.

    i experienced the same problem. this is what i did:
    *right click firefox
    *click properties
    *click compatibility tab
    * check "Run this program in compatability mode for:"
    * on dropdown choose Windows 7.
    * click ok or apply.
    this solution solved my problem.i hope it will work on yours too.

  • What do I need to do to fix a problem such as an error message stating "iTunes has stopped working"?

    What do I need to do to fix a problem such as an error message stating "iTunes has stopped working"?

    Hello westerboy,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1421
    Best of luck,
    Mario

  • What happened?  Tried to open Elements 8 and error message says "Photoshop has stopped working."

    The Welcome screen somes up but then fades and error message says "Photoshop has stopped working."  Then Windows closes the program.
    I shut down the computer, waited, then did restart, clicked on PSE, and the same message came up again.  That was last night,  thought I might get a message this morning, but same thing happened again.  I'm trying to not panic - this is all new to me.
    Any help welcome!

    If you have not updated to the most current version, you might try that.

  • I get an error message "Adobe Reader has stopped working" when i try to use Firefox

    I get an error message "Adobe Reader has stopped working" when i try to use Firefox

    I have also retarted twice...

  • This is the closest community that might solve the followingroblem:  Icloud is supposed to work from a pc.  It works fine from my iphone and ipad but not my pc.  I keep getting the error message: ApplePhotostreams.exe has stopped working.

    Iclouds is supposed to work from my PC but doesn't.  Loaded the program several times.  I have all the corrected software.  I keep getting the error message: ApplePhotoStreams.exe has stopped working.  Anybody out there that uses icloud with a PC???

    I've got the same problem and can't find a solution for this problem...

  • Error message "clc.exe has stopped working".

    When I start Photoshop I get an error message "clc.exe has stopped working".  I have the latest version drivers for my Acer X23H and HP 2311 LCD monitors so upgrading them is not possible.  Is there any other fix I can try?

    I've just downloaded and installed the very latest drivers from AMD and installed them.  Still, I get the "clc.exe has stopped working" errors when I launch PS.  I do not get this, or any other errors, when opening or running any other programs, and have never once gotten a blue screen or had any failures in this system for the two or three years it's been running.
    While it's remotely possible that there is some error in AMD's latest (and previous) drivers for this video card, what seems to fit the symptoms I have, is that there is some problem in Adobe's code.
    Previous versions of Photoshop open and run fine on this system.  Other CAD and graphics programs run fine, too, with no crashes, lockups, or failures.
    Still, if there's something else that needs to be updated for my video system, to make the Adobe errors go away, I'm open to do whatever updates are necessary.  I'm running an AMD Radeon HD 5700 series display adapter, driver date 11/20/2014, version 14.501.1003.0.  Device manager says the device is working properly (for whatever that's worth).
    The computer is running Win 7 64 bit ultimate.  Processor is AMD Phenom II X6 1090T six-core processor.  All has been running flawlessly for several years, and continues to do so with every application except Adobe Photoshop 14.501.1003.0.

  • Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working

    Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working

    Assuming that you are in Win (which you haven't said), you can try using this tool to first remove all traces of previous versions of Reader:
    http://labs.adobe.com/downloads/acrobatcleaner.html
    Then, download the full offline Reader installer from 
    http://get.adobe.com/reader/enterprise/
    and run it immediately after restarting your computer.

  • Error message "Adobe Acrobat has stopped working"

    I just upgrade to Acrobat 9 Std. I am running windows vista. When I open Acrobat and try to create a PDF I receive a message "Adobe Acrobat has stopped working" then another one "Windos will close the program and notify you for a solution", What shoul I do ???????
    Mauricio.

    If you have not updated to the most current version, you might try that.

  • I've installed Firefox 3.6 running under Vista V6.0 Service Pack 2. Any attempt to do anything at all with it produces a Windows error message that Firefox has stopped working and it then closes Firefox. Is this a Vista issue?

    The download and install processes seemed to work OK
    The first Firefox window opened suggesting I update Adobe Flash Player. Clicking on download (with AV s/w either on or off made no diference) produced the Windows message that Firefox had stopped working.
    By-passing the Adobe download suggestion and attempting to open up my home page (Google) produced the same result.
    In fact any attempt to do anything, i.e. hitting the Enter key or left-clicking the mouse, produced the same result. Firefox freezes and WIndows then closes it.

    Try to update Windows Vista Service Pack 2 using Windows Update, then select all high-priority or important updates, install them and restart the computer. Run Firefox. If it works fine then OK or if it crashes then there was no problem with the operating system.
    The second method is restart your PC, after the manufacturer logo appears and before "Microsoft Corporation(C)" progress bar appears press F8 key. you will be presented with a menu with options-
    Safe Mode
    Safe Mode with Networking
    Safe Mode with Command Prompt
    etc. select "Safe Mode with Networking , and then login to your user account. Run Firefox again. If it works normally, then that probably means that your PC was infected prior to installing Firefox. Update your existing antivirus and run a full scan or acquire free Antivirus like Avast Free Antivirus etc.
    If it still crashes, then try re-installing NOT Repairing Firefox AFTER INSTALLING AN UPDATED ANTIVIRUS .
    OK the last way, better uninstall Firefox 3.6 and install Firefox 4 Beta 7. Firefox 4 Beta 7 runs 3 times faster than Firefox 3.6, with an overall improved interface.

  • MP870 MP Navigator EX 3.1 Error Message: "MP Navigator has stopped working"

    Hello
    I have a MX870 multi function inkjet. The scanned is the most important thing for me. BUt all of a sudden The software went crazy and cannot load. Everything was working fine up until a few weeks ago.
    The error message from Windows is: MP navigator has stopped working then it gives me the option to debug or close. Either way nothing makes it work.
    I am running it on Windows Vista Home Premium (service pack 2) . Device is connected via USB.
    I have read other posts about the twain 32 folder but they refer to other operating systems  such as windows 7.  I also tried reinstalling the software. In fact, the cannon website where you can get support does not seem to have the model MX870.  I had to select model MX876 which was the closest, in order to obtain a link to download the software.
    Please help

    PLEASE help!

Maybe you are looking for

  • How to avoid 'for update' clause ?

    Hi All, I am trying to build the data-entry form based on complex view. I've got JBO-26080 Error while selecting entity... (ORA-02014 select ... for update). Is it possible to delete 'for update' clause in select ? What is the best practice to deal w

  • IE8 back button not working in Login page

    Hello all, I have a problem. When I go from one page to a Login page, Back button on IE(my IE version is 8) doesn't work. I use theme 16 - Dark Blue, APEX version - 4.0.2.00.07. Is that a problem from APEX or the theme, or the problem is in IE browse

  • Wait for Event in Fork - How to terminate the wortkflow in leg 2

    Hi Experts, My scenario is that there is a fork with 2 branches. 1 has a change Doc method. In this I have raised an enent when a action is performed which in turn calls a wait for event in other leg. The problem is that the other loop is executing b

  • Prevent Text Boxes to shrink as big as the text in it - move existing InfoPath form from SharePoint 2007 to SP2013

    Hello Together, we have some simple InfoPath forms in place. With SharePint 2007 they are working well. Now we will move to SharePoint 2013. It was easy to re-publish them on a SharePoint 2013 Site and to work with, but i have an optical / technical

  • TRYING to re-install quicktime pro after upgrade to leopard

    When I purchased QTP I was running tiger os/X then upgraded to leopard. I have all my online reciepts with the keycode and it wont install. how do I get it back. I tried registering then entered the keycode and the site is trying to make me pay for i