Error Message w/ Blu-Ray

When I try to set up my new SAMSUNG BD-D6500 BD PLAYER 3D/ to my LG 20LS7D TV I get an error message that says Invalid Format.  I hooked it up with an HDMI cable and changed the input to the HDMI setting...any suggestions?

Turn the TV and the player off.  Make sure that the player is attached with an HDMI cable.  Next turn the TV on, then the player, then switch the TV to the appropriate HDMI input.
If you find my post useful or informative, please click the icon below with the plus sign and star to give kudos. Thank you!

Similar Messages

  • Itunes wont launch, no error message, no blue screens, just wont open

    itunes wont launch, i get no error message, no blue screen, it just wont open. I've tried to delete and reinstall, but once i close itunes i still have same issue. it wont open again.

    I have same problem  on my XP lap top and Windows 7 PC.    Apple have been investigating this problem for me for a week now without success so far.  Understand it 's ongoing with other customers as well.
      It is caused by an bit of program called APSDaemon supplied by Apple in latest i-Tunes.     Your quick fix to enable you to open i-Tunes again is as follows:-     open Task Manager (right click bottom toolbar), click on Task Manager, select Processes.   Find APSDaemon, highlight and press END PROCESS.      I-tunes will now re-open ok.   You have to repeat this every time you want i-Tunes re-opened until you switchoff or restart.
    A pain I know, but lets you keep going until Apple repair and release an update for i-Tunes

  • "Could not create ac3" error when burning Blu-ray

    I've spent the last week designing a Blu-ray in Encore CS5.  Upon burning, I was given the error message "Cannot create '_sessionfiles_Dsf_session_1_audio.ac3", and the burn failed (after going for seven hours).  I really don't even know where to begin with this.  The Blu-ray is about 80% full (20 GB) and includes multiple timelines and several menus (one of which has audio).  No pop-ups.  It should be a fairly straightforward project.  However, it's given me problem after problem and has taken way too much time.  Can anyone offer insight before I spend another week tracking down the problem?  Thanks.

    In the last few days, things have gone from bad to great and back to bad, and it's been non-stop work.  I freed up a ton of space on the computer and backed it up.  Then the computer gave me a kernel panic, which happened so often that I had to restore the whole computer.  I don't know if that's related to the Encore issue.  Then I tried to burn again, and it seemed to be working until it gave me an error message that said "Blu-ray Error: 'device error', code '3', Note: ".  So I looked around online and decided to export as an ISO disc image file.  That worked fine.  Then I tried burning a Blu-ray using third-party software, which failed halfway through.  Next I tried burning using Disc Utility.  It got all the way to the end and said "Could not verify" and failed.  I tried playing it in my Blu-ray player anyway.  For the first time, it actually worked.  The movie and the Scene Selection menu work fine.  But when I try to go to Special Features, nothing happens.  The Blu-ray is supposed to go to the Special Features menu at the end of the main movie, but it just goes to a black screen after that and locks up.  Now I'm really lost.  Any more suggestions?  Thanks.

  • Encore Error when building Blu Ray *ISO (too many primary video...)

    Hi
    I have huge problem.
    I'm creating Blu Ray Image (ISO)
    I have project with
    Main Menu (Button-Start Film and Button-Submenu) Background Video and audio
    Submenu (16 Chapters Buttons and Button-Back to Main Menu) Background Video and audio
    One Timeline (rendered in PrPro) 2:46h (16 Chapters on it)
    I do Render motion menus first, then transcoding now of Timeline and when i Click Build I get this error
    "Blu-Ray Object: "<Menu>Name_Menu top menu",Error:"device error",Code: "2",
    Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
    I couldn't Find any answers for this problem in google.
    Anybidy had this and solved ?
    My Machine is
    Motherboard. ASRock P67 Extreme 4
    Proc. Intel core i7 2600 3.4GHz LGA1155
    RAM. DDR3 CL9: 12GB
    HDD. WD WD10EARS 1TB Caviar 64MB Sata
    Cooler Aerocool 700W
    GFX. Asus Geforce GTX 460 1024MB DDR5
    Win7 x64 Home Premium

    Are you using an AVCHD file as a background video and Audio?  The AVCHD files are the cause of the issue.I think this is a known issue in Encore and is discussed in the below thread -
    http://forums.adobe.com/message/3158140
    Thanks.
    Shuchi

  • Device error when burning Blu Ray disk at 96%

    Very simple program to use so far. Just drag and drop.
    My current project was shot in HD 1080p about 2 hours or 13 gig long and I made 4 lower resolution DVD's no problem.  I like how it shrunk it with out me having to do anything other than check the box (use space available)
    However when I went to make Blu Rays in addition to taking about 18 hours its gets right to the end and spits the disk out unfinished and has device error at about 96% of burning finished. Disk will not play.
    I have ruined 3 blank  4x blu ray disks so far, same result.  I have down loaded and installed the 8.01 update, I will turn off the screen saver and anything else I can find, before I try it again.
    Its a new computer with only PE8 running on it.  Quad core Gateway with 8 gig ram and a almost empty 1tb hard drive and LG blue ray writer.
    I have not tried to burn anything else with the blu ray writer, as thats what PE8 was for.
    I did not have the timeline fully rendered before I started, if that makes any difference.
    Anybody have any ideas.
    Thanks in advance.
    Philip

    Sorry I'm a newby. I'll put this is PRE 8 where it belongs.

  • Runtime error when burning blu ray disc

    I am attempting to burn a 1080i/29.97 blu ray disc and when it gets to something like 99% finished, i get a runtime error, and then
    encore crashes. Could it be there there is not enough space on the disc? The video and audio combine to somthing like 23.5 GB.
    Any help would be greatly appreciated.Also, running encore 4.0.

    This Adobe KB Article might be able to give you some tips.
    Good luck,
    Hunt

  • Adobe CS5 error Build .iso - Blu-ray Error: "device error", Code: "3", Note: "File can not o

    Hi am trying to create a bluray image .iso i loaded the gritty submenu and modified it and am getting this error
    and when i try to build it it giving me this error
    Blu-ray Error: "device error", Code: "3", Note: "File can not open.(/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/Gritty Noir Submenu HD_mm_1.m2v.00_00_00_1.1.1_UTC.ves) -
    Anybody encountered this problem? Thanks I appreciate it.

    Hi,
    Remove the all the files from
    /Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/
    This will resolve this issue.
    This happens if any file corrupted in Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/ folder
    Thanks,
    Pankaj Gauba

  • "media not present" error when burning blu ray in PE12

    I have two systems, both ground-up builds, identical Win 7 Home Premium and Premiere Elements 12 installs.  Both systems have internal blu-ray burners.  One burner is an ASUS BW-12B1AT and the other is a Pioneer burner (don't recall the model number).
    System 1:  Intel 4770k with Gigabyte MB
    System 2: AMD 8-core with Gigabyte MB
    System 1 gives "Media not present" error in PE12 when attempting to burn to blu ray discs using Verbatim discs. System is able to burn DVDs and CDs, and playback blu ray discs.  System is also capable of burning blu rays using Nero.
    System 2 works fine - blu ray media is recognized instantly by PE12 when in the drive and burns blu rays perfectly.
    I swapped the blu ray drives and SATA cables from System 1 and System 2 with the same result - this eliminated the drive manufacturer and cables from being the problem, as both drives worked perfectly in System 2 and neither worked in System 1.  I also tried different SATA ports and power supply taps on System 1 without any success.
    Then, I noticed that on System 1, with the dialog box open and indicating the "media not present" error, if I ejected the blu ray disc and reinserted it, the burner LED would flash 18 times (approx. 1/sec) and then pulse briefly indicating a burst of activity for about 1 second, as if it was either reading the disc or writing to the SATA.  If I pressed the "rescan" button during this brief burst of LED activity, then the disc was recognized and I could proceed to burn it.    If I tried to press the rescan button at any time before this instant or after, the "media not present" error did not clear.
    To me, this is an indication that something in the handshake timing of the SW and the burner is not correct, and that timing differences in the system HW are not provided for in the SW. I see that many others have had this issue and have had to buy work-around image burners to address this. I believe your burner drivers need to be reworked to eliminate this bug.  This is evidenced by the fact that Nero works and your SW does not, and that different systems consistently exhibit this problem.
    Please let me know when you will have a SW patch to address this or if you have any idea of system settings that can be adjusted (I don't know of any myself) that would eliminate this problem.

    pastrobes
    This is not Adobe. Rather user to user. If you want to contact Adobe, your likely route is via Adobe Chat.
    If you have a feature request or bug report, then consider filing a Adobe Feature Request Bug Report Forum with Adobe
    Adobe - Feature Request/Bug Report Form
    The likelihood of an Adobe engineer seeing your thread here is essentially slim to none.
    Your results are very interesting but lots more variables to consider.
    Do you have any version of Premiere Elements other than 12? It would be interesting to learn if a prior version's burn
    dialog would present with the Media Not Preset issue for your burn to Blu-ray System 1. That is easy enough done with a tryout of
    11 or 10 or 9 from the following web site. ProDesignTools: Adobe® Developments in Focus
    On the other side of the coin, you could give the new version a look in this regard. A new version is expected at the
    end of September 2014.
    As an aside, have you updated 12 to 12.1 Update, using an opened project's Help Menu/Update. If not, I would encourage
    you to do so. It does correct an Expert workspace text styles issue plus other matters undefined by Adobe.
    ATR

  • I'm getting an error  when trying to burn Blu Ray.

    When trying to burn a Blu Ray disc in Encore it is giving me an error that says, Blu Ray Object "wedding 6-20-09 tru blu.m2v" export
    file not found . Please help. Thank You .

    First, Fix Encore Win7 Problem http://forums.adobe.com/thread/528582?tstart=0 or direct to
    http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
    Second, shorten the name and remove all spaces and non-letter characters
    Long File Names Cause Crashing http://forums.adobe.com/thread/588273

  • Blu-ray Error Code 25 Note: Not Enough Hard Disc Space

    I'm trying to make a Blu-ray image on my computer and recieving an error that states:
    Blu-ray Error
    Not enough free storage, "code 25" Note: Not enough Hard disc space
    Now I first thought to check my hard drive but I have plently of space. Next I noticed that encore CS3 was trying to make an image that is 340GB in size!!! Why would it do that? My project only has 4 assets. HELP this is going from bad to worse.

    My longer notes on this error:
    The most common workaround for this is to build to a folder and burn with ImgBurn (for PC) or toast (for Mac).
    Searches show that there has not been success in many situations. I do not believe that it is one problem.
    I have generally believed that the error refers to temporary storage on the hard drive. And users underestimate the amount of temporary hard disk drive space used. For bluray it is about twice the disk or more.
    Some users experience this error when they are creating dual layer BD disks, and a layer is more than 25G. Each video/layer must fit on one side.
    And some users successfully burn their disk by re-encoding to a lower bitrate (a 25G BD disk does not hold 25G). Encore uses padding to predict the size on disk (e.g. add 10% to the amount of space it predicts that build will use), and it can be wrong.
    Always good to "run as administrator, though I don't know that ever fixed this issue if someone wasn't.
    For CS4 there was a required update for a Roxio component. I believed this was a temporary problem due to the combination of Win7 and Encore CS4, but users on newer OS and Encore have reported resolution of problems after installing the patch.

  • Blu-ray Error: "device error" Code: "3", Note: "AS-StorageError = -97060

    I just wasted 2 Blu-Ray discs trying to burn a project. I was trying to burn a very simple project: a two-chapter Blu-Ray with two 55 minute episodes of a TV show on it.  I have used the exact same computer recently to do exactly the same job with success, so I don't know what the problem is.
    There are no menus in the project: it's just a bare-bones auto play disc with stereo sound only.  The disc shows 24.37 GB used on a single-layer BD.
    The files are conformed and as the build begins, the following error pops up:
    Blu-ray Error: "device error" Code: "3", Note: "AS-StorageError = -97060
    System info:
    Windows 7 Professional
    Service Pack 1
    Intel i7 8 cores @ 2.80 GHz
    12 GB 1600 RAM
    AMD Radeon HD5870
    WD 3TB HD 7200 RPM NTSC file system
    Pioneer BD-RW BDR-206 ATA burnerncore
    Adobe Encore CS6

    I do not see another example of this error with the "97060" in it.
    I never trust my recollection of this, but note that the 24.37 GB may actually be 24.37 GiB, which may be too big to fit on a single layer Bluray. You should get a different error, but who knows.
    I would try building to a folder to see if that succeeds. Then you can return to the issue of burning. Many of us prefer ImgBurn for burning rather than Encore.

  • Getting "layer break" error message when trying to Preview a single sided DVD, or build an ISO image or disk folder

    Hi!  Hoping someone might be able to help with an odd problem.  I haven't found anything in the forums or the web that match my symptoms.
    I've been using Encore CS6 (v6.0.1.013) on a MacBook retina over the past year to successfully create a number of single sided DVDs with menus, chapters, and all that.  I usually make a copy of a previous DVD project, and then replace video assets with the new files and transcodes, move and rename chapter markers, and rework the menus in Photoshop.  I then will build ISO images for both DVD and Blu-Ray (both single-sided), and use those to burn many copies of each DVD for clients.
    This week, while developing one of these projects, when trying to build a DVD ISO image that looked like it would fit on a 4.7 GB DVD, I received the "layer break" message ("The chosen layer break does not satisfy dual layer requirements.  To fix this, either set a new layer break manually, or choose to set layer break automatically.") because (I'm guessing) the material was too long for the 4.7 GB DVD (the Build screen now shows about 5GB of material are in the project).  This is the first time I've seen that message - usually Encore just tells me the material is too big for the DVD.
    I re-transcoded the material down to well under 4.7 GB (about 3.9 GB), reverted and replaced the transcoded files, and now the DVD build screen shows that there are about 700MB free on a 4.7 GB DVD.  But I still have not been able to build any version of the DVD (image, folder, disc), without getting the "layer break" message.  I also now get this same layer break message when trying to "Preview from Here" any menu, killing my ability to preview the DVD menus in Encore.
    Just to see what would happen, I chose an 8.4GB Dual Layer DVD, and chose "manual" instead of "automatic" for the layer break selection, but never got the layer break selection dialog box, just the "layer break" error message.
    I typically build both DVD and Blu-Ray images from the same material in the same project.  I use different transcoding settings for each, and I have been able to build a Blu-Ray ISO without this "layer break" error on the Blu-Ray build (which is about 24.5GB when built).  And as I mentioned before, this is the first project on which I've even seen this layer break message.
    Any suggestions would be greatly appreciated!  I'd rather not recreate the project from scratch, but I'm worried that I may have to.
    Thanks
    Jon

    The total project being small enough may mean you have one layer that is too big. Both layers have to be smaller than half the disk, right?
    Be sure you "run as administrator" for dual layer projects.
    Encore may set the layer break correctly if it finds a good place, but there are numerous complaints about it being unreliable.
    Build to a folder (no layer break is set), then use ImgBurn to build and ask to be prompted for layer break. ImgBurn is also unreliable under some circumstances.
    The most frequent problems appear to be when there is no good location for a break. Do a search for "layer break imgburn" and you will see a variety of strategies.
    http://forum.imgburn.com/index.php?/topic/1777-how-to-create-a-double-layer-dvd-video-imag e-file-using-imgburn/
    Also see these posts:
    Neil Wilkes
    http://forums.adobe.com/message/3466255#3466255
    Neil Wilkes
    http://forums.adobe.com/message/4054265#4054265
    Neil Wilkes
    http://forums.adobe.com/message/4054269#4054269
    Jon Geddes
    http://forums.adobe.com/message/4002647#4002647
    shuchi shrivastava
    http://forums.adobe.com/message/3905911#3905911
    Jon Geddes and Neil Wilkes
    http://forums.adobe.com/message/4003221#4003221

  • Files or Folders needed for blu-ray disc missing !

    Hi,
    I have Encore CS6. It successfully builds 'blu-ray folder' & 'blu-ray image' without any error. But when I try to create an iso image of the prepared folder using 'Ashampoo Burning Studio' it gives an error message saying that the folder doesn't contain all the files and folders needed for blu-ray. But when tried to do the same for DVD, there is no error. My blu-ray burning drive is broken and I want to check my finished project from my hard drive using Daemon's Tool and VLC or PowerDirector.
    Could anybody advise how this can be fixed on Encore CS6. Encore CS5 never had this problem.
    Thanks

    Tried that as well. The player gave an unrecognized format error.

  • Playing blu-rays using VLC

    I have the latest iMac running Yosemite and wanted to be able to play blu ray discs using a Freecom mobile blu-ray writer, so I downloaded VLC media player (latest Mac OS X version 2.1.5), a free software that is supposed to do that and more. The problem is that when I try to play a blu ray, I get the message "Blu-ray error. This Blu-ray Disc needs a library for AACS decoding, and your system does not have it."
    I found various suggestions on the internet for Mac-users with older operating systems, but they were complicated to follow and I am concerned that they may not work with Yosemite.
    Could anyone kindly tell me where I can get a clear explanation as to what I should do to be able to play blu rays using VLC with Yosemite? Thank you!

    Other posters here have bought Sansung drives and complained that they wouldn't work, either.
    I have been to the Samsung website on several occasions to research this issue  and I can find no evidence that these drives are Mac compatible.
    I believe that no optical drive from Samsung is compatible with Macs.
    Here are some Blu-ray drives that are known to be Mac compatible.
    Return the drive you have and try these.
    http://eshop.macsales.com/shop/blu-ray
    http://www.lacie.com/us/products/range.htm?id=10058
    And here is the necessary Blu-ray software for these drives
    Software Blu-ray player Mac OS X
    http://www.macblurayplayer.com/
    Blu-ray burning/writing/authoring software OS X
    http://www.roxio.com/enu/products/toast/pro/overview.html
    Good Luck!

  • Blue ray 3-D

    I have a samsung 3-D tv and a sony blue ray 3-D player. Its hooked up right but first time I put a blue ray 3-D movie in it gives me a message(your blue ray player does not support blue ray 3-D) Maybe an upgrade? If so how?

    First try to update the firmware on the BD player.  Then report back.
    If you like posts that I make, be sure to click on the star underneath my name. Thanks!

Maybe you are looking for