Error Message When Activating InfoSource
Hello - I receive the following error message when I attempt to activate an InfoSource in BW (I'm using the program "RS_TRANSTRU_ACTIVATE_ALL" via SE38):
Mass generation: No versioning for PSA table /BIC/B0000729000 for InfoSource 8ZO_CHGRE
Message no. RSAR023
The InfoSource is used to load a cube with ODS data. If anyone has any suggestions, I would greatly appreciate it. Thank you in advance.
1. I performed the test in RSRV (i.e. PSA Tables/Consistency Between PSA Partitions and SAP Administration Information## ) and I received the following results:
PSA Table /BIC/B0000729000 is not partitioned (according to RSTSODS)
Message no. RSRV186
2. Generating the export datasource was not successful - I receive the following message from a "Runtime Error - Description of Exception" screen:
Runtime Errors MESSAGE_TYPE_X
Date and Time 06/27/2007 12:13:49
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Serious internal error:
Technical information about the message:
Diagnosis
A serious internal error occurred. It could not be corrected.
Procedure
The following information is available on this error:
1.
2.
3.
4. OSS note
Check the OSS for corresponding notes and create a new problem
message if necessary.
Message classe...... "RSAR"
Number.............. 001
Variable 1.......... " "
Variable 2.......... " "
Trigger Location of Runtime Error
Program SAPLRSAC
Include LRSACU75
Row 536
Module type (FUNCTION)
Module Name RSAR_TRANSTRUCTURE_ACTIVATE
Similar Messages
-
Error message when activation a packaging specification in ICH 5.0
Dear all,
I created a packaging spec within ICH 5.0. The check function does not return a error. But when trying to activate the PS I am getting the error message:
Package specification not activated; no condition records found.
What kind of condition records does the system mean?
Regards
MartinHi Martin,
You can have a look in the pack spec group and make sure that the flag 'PS_ACTIVATE' it is not set.
That way you will no longer face this error during the activation process.
I hope this will help you. -
In iTunes software get error message when attempting to access iTunes Store. Could not connect. Unknown error occurred (0xx800903318). Make sure your network connection is active and try again...NG
Hello there,
Thanks for using Apple Support Communities.
Since this error 0x800903318 combined with the network connection error message is occuring when you're trying to connect to the iTunes Store, I'd like you to please follow the steps in the article linked to below.
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
Cheers,
Alex H. -
I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
Error message when attempting to use scanner Canon model MP610
Error message when attempting to use scanner Canon model MP610, any one have any fixes, suggestions?
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, empty trash, reboot when complete.
For the other problems...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts? -
Error message when attempting to run aam
I am encountering error message when attempting to run aam - Please connect to the internet, then try again when I am already connected
Please see Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for common resolutions to these difficulties.
-
Getting error message when starting Photoshop CS3
I am getting the following error message when starting CS3:
"This application has failed to start because CML4.dll was not found."
The window title is, "Photoshop.exe - Unable to Locate Component"
Of course, the only button to push is the "OK" button (which should probably read - Something's f-d up. Press here to continue.) After pressing the OK button, CS3 starts and works without issue - so far. I guess I haven't actually used the part of the program that uses CML4.dll or just don't see any difference with or without it.
How can I resolve this issue - without reinstalling PSCS3? and why does it happen in the first place?Nikon Scanning Software has CML4.dll as part of its package. I assume that the Nikon software did not install/uninstall properly and is causing the error. I have not gone back to do Nikon scans within Photoshop so I do not know if it affects performance. McAfee does not flag it as a virus, and other websites I referred to indicated no viral activity associated with the file.
-
Error message when trying to install Flash 10.0.45.2
I am running IE 7 on windows XP. We had some issues with Flash active active control version 10.1.53.64 and higher so I unistalled 10.1.53.64 and downloaded the older version (10.0.45.2) from the adobe website but when I try to install it I get the following error "The version of Adobe Flash Player that are trying to install is not the most current version. Please visit http://www.adobe.com/go/getflashplayer to obtain the latest more secure version". I am however able to install version 9.0.289.0
Is there any particular reason that i cannot install 10.0.
The reason that I don't want to use 10.1 is because it has a bug that affects the working of my application and the audio some times does not play.
ThanksThanks for the information. I downloaded the Active X from the link you provided but I am still getting the same error message
Date: Wed, 15 Dec 2010 17:01:23 -0700
From: [email protected]
To: [email protected]
Subject: Error message when trying to install Flash 10.0.45.2
If I remember correctly, there were two different installers for 10.0.45.2: one that did the checking for a newer version, and one that did not.
The forum search is currently disabled, and I cannot find the topics that were discussed at the time.
However, I still have the installers for the non-check version available for download on my servers:
http://www2.gol.com/users/pbw/filelib/install_flash_player_ax.exe (ActiveX)
http://www2.gol.com/users/pbw/filelib/install_flash_player.exe (plugin)
> -
Error message when using Spry Data set with XML
Hi,
I have what i see as a big problem, might just be me being
dumm, but here we go.
When I try to use the feature of spry XML Data Set and insert
spry table I get error message when trying it in IE 7.
There are even a problem when I use fireworks automated slide
show function, where you can choose to use the Spry/XML gallery
feature.
The error message I get everytime (incl the auto gallery in
fireworks) is:
The tag: "html" doesn't have an attribute: "xmlns:spry" in
currently active versions.[XHTML 1.0 transitional]
The tag: "div" doesn't have an attribute: "spry:region" in
currently active versions.[XHTML 1.0 transitional]
The tag: "th" doesn't have an attribute: "spry:sort" in
currently active versions.[XHTML 1.0 transitional]
and so on.
What´s wrong?!Hello barvid,
Ok, let's take each problem step by step:
1. The first error you see in the browser: " Exception while
loading ..." normally appears when you try to load files that are
not permitted by the browser security model. This means the XML
file you try to load is located on a different server than your
HTML which is not allowed. The browser is not permitting to load
any files that are not in the same domain as the current page
because of the complex security risks. You'll have to either get
the XML file from its original location and save it in your website
or use a proxy on your web server that should request that file
from the external server and send it to the browser as an XML from
the same domain as the HTML origin.
1.2 The "Exception while loading ..." error you see is a
generic error and my previous advise is based on my experience. In
case this is not your scenario you'll have to open the SpryData.js
and around line 112 you'll see the following code:
Spry.Debug.reportError("Exception caught while loading " +
url + ": " + e);
Please change this line with the following line of code:
Spry.Debug.reportError("Exception caught while loading " +
url + ": " + (e.message?e.message:e));
to obtain a more verbose error message that may clarify the
reasons of your errors.
2. The problems you describe are not browser errors but they
are w3c validation errors. At this point the XHTML standard allows
every application that define custom namespace attributes to also
link a DTD to the page so the page to continue to be valid.
Unfortunately at this point this feature is not correctly supported
by the FF and IE so we wrote an articles about how you should
link
the Spry DTD to your page so the validator understand the
custom attributes Spry use. You'll find inside the full description
of the problems and all the technical details you'll need to know
to solve this issue.
Regards,
Cristian -
Error Message When Loading a Cube
Hello - I received the following error message when I attempted to load a cube:
No SID found for value '0.000' of characteristic 0CURRENCY
Is anyone familiar with this error message? Also, I tested this load in DEV before I moved the cube into QA but I did not receive the error message in DEV. Any help would be greatly appreciated, thanks.Hi,
I had a similar error just a few days ago. I could solve it by replicating the datasources again and activating the transfer structures via rs_transtru_activate_all. After that the load went fine.
regards
Siggi -
i want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?
Oliver,
Are you getting activation errors? As Ned stated , it is easier to troubleshoot if we have the specific type of error and error detail that you are getting.
Here is some help on activation if this is the issue:
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Pattie -
I keep getting an error message when trying to purchase more gold coins?
I keep getting an error message when trying to purchase more gold coins. Same unexpected error occurs with all of my slot machines??
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
Getting an error message when trying to log on to imessage
Getting an error message when trying to log on to imessage... how do I fix this
Whart does the message say?
Maybe:
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting Messages -
I have a Macbook Pro. I just purchased Acrobat Pro DC and keep getting an error message when I try to download, saying I need to contact support. I've eliminated previous versions of the application because they were US-based versions and I'm now living in Australia. I checked Flash and it seems to be installed correctly. what am I doing wrong?
Hi Laura ,
Could you please elaborate about the issue and also about the error message?
What does it say except contacting the support?
Is it something to do with Licensing and Activation of Acrobat DC?
Also please update us from where are you trying to download Acrobat DC?
I would recommend you to follow these links download Acrobat DC and see if you still face any challenges .
If you want to opt for perpetual ,follow this link .
Download Acrobat products | Standard, Pro | DC, XI, X
And if you wish to subscribe for Acrobat DC .Kindly refer this link .
Download Acrobat DC (Continuous) | Enterprise or VIP
Regards
Sukrit Dhingra -
Licence error message when using automation software
Error message when using Rational Functional Tester 7.0.1.1
to record a Flex application. The message seemed to come from the
Flex application.
I can record a fiew step in the application, then I have the
message : "Licence are not present. Eith the trial version only
limited record are allowed". But, my license of my Rational
Functional Tester application is activated.
I am using a Flex builder 3 trial version and the trial is
not over.
Is there any problem to get the license in the File compiler
with "D:\apps\IBM\SDP70\FunctionalTester\bin\rft.swc"? That RFT
file is supposed to be included in the flex application once
compileDoes anyone know how to build with automation support in a
linux environment?
We simply run an ant script build and have the SDK installed.
We purchased Flex Builder Professional, but cannot install on Linux
(we don't want to use the alpha version).
Thanks for any pointers :)
Maybe you are looking for
-
Mail crashing on failure to authenticate cyrus user
Mail crashed, and now will not warn re-start (a cold start of the server works) with error: no entry in /etc/passwd for user _cyrus can't change to the cyrus user: No such file or directory The IMAP logs also show, for ALL users, even though all user
-
How to use xquery on attributs
Hi, I have an XML column in a table that contains only attribute information that I need to shred: '<dimensions><dimension name="width" value="12.77"/><dimension name="height" value="0.14"/><dimension name="depth" value="12.92"/><dime
-
iphoto11 is not sharing photos by email. Triangle error symbol appearing. Email is hotmail account. Have recently upgraded software Java? Don't know if this makes a difference.
-
Change Source Client RFC in BW
Hi Basis Gurus! We recently did a system copy of our BW Dev environment from production. The basis team has set up the RFC connection to point to the ECC Configuration client (200). We obviously need to be mapped to the data client (220). Basis team
-
What is meant by change pointer and change request
hi, what is meant by change pointer and change request in sap r3 plz can u any one notes or link on this , or if possible briefly tell about this.. i am looking for clear idea on this.. thanks Ruban