Error message when activation a packaging specification in ICH 5.0

Dear all,
I created a packaging spec within ICH 5.0. The check function does not return a error. But when trying to activate the PS I am getting the error message:
Package specification not activated; no condition records found.
What kind of condition records does the system mean?
Regards
Martin

Hi Martin,
You can have a look in the pack spec group and make sure that the flag 'PS_ACTIVATE' it is not set.
That way you will no longer face this error during the activation process.
I hope this will help you.

Similar Messages

Error Message When Activating InfoSource

Hello - I receive the following error message when I attempt to activate an InfoSource in BW (I'm using the program "RS_TRANSTRU_ACTIVATE_ALL" via SE38):
Mass generation: No versioning for PSA table /BIC/B0000729000 for InfoSource 8ZO_CHGRE
Message no. RSAR023
The InfoSource is used to load a cube with ODS data. If anyone has any suggestions, I would greatly appreciate it. Thank you in advance.

1. I performed the test in RSRV (i.e. PSA Tables/Consistency Between PSA Partitions and SAP Administration Information## ) and I received the following results:
PSA Table /BIC/B0000729000 is not partitioned (according to RSTSODS)
Message no. RSRV186
2. Generating the export datasource was not successful - I receive the following message from a "Runtime Error - Description of Exception" screen:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          06/27/2007 12:13:49
ShrtText
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Serious internal error:
     Technical information about the message:
      Diagnosis
          A serious internal error occurred. It could not be corrected.
      Procedure
          The following information is available on this error:
          1.
          2.
          3.
          4.   OSS note
          Check the OSS for corresponding notes and create a new problem
          message if necessary.
     Message classe...... "RSAR"
     Number.............. 001
     Variable 1.......... " "
     Variable 2.......... " "
Trigger Location of Runtime Error
    Program                                 SAPLRSAC
    Include                                 LRSACU75
    Row                                     536
    Module type                             (FUNCTION)
    Module Name                             RSAR_TRANSTRUCTURE_ACTIVATE

Error message when compiling invalid packages and procedures

Hi.
I have a routine for copying certain data from a production database to a test database. To do this I disable constraints and triggers, truncate tables, copy tables and enable triggers and constraints again.
Now several of my functions, procedures and packages are made invalid and marked with a red cross. In SQL Developer I can compile invalid functions, procedures and packages. When I compile functions it works fine, but when compiling procedures and packages I get the following error message:
An error was encountered performing the requested operation:
ORA-00904: "ATTRIBUTE": Invalid identifier
Vendor code 904
When I click OK on this message I get a confirmation saying:
Packages have been compiled with #0.CNT# errors.
I had this error in both the previous and the new version. Is this a bug or is there a way to come around it? When I copy and modify the SQL generated to perform this task and run it in SQL Plus it works fine.
I use Windows 2000 5.00.2195 Service Pack 4, SQL Developer version 1.2.1, Oracle 9.2.0.8.0 and Java version 1.5.0_11
Message was edited by:
SvSig

i have now upgraded to Java 1.6 update 2. I still get basically the same error, but it is presented a little bit differently:
An error was encountered performing the requested operation:
ORA-00904: "ATTRIBUTE": invalid identifier
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action:
Vendor code 904
Are there other possible error causes than the operating system version and the database version?
We are going to install an Oracle 10 test database in a couple of weeks, so then I will find out whether the database version is the problem.

Error messages when using InCopy packages

I have an editor who travels a lot, and is having consistant problems with using the packaging workflow in InCopy. I believe some of his problems are human error - but don't have the technical reasons for the error messages. There have also been some error messages received by the artists when they get the package back and try to update the ID file.
We are using CS4 and macs with snowleopard OSs.
Can someone please help to explain what these errors mean below?
1. InCopy User - when opening the icml file (after first opening the package. Going back to the icml doc for more editing)
" "" could not be found. Do you want to postpone its recovery?
Click YES to recover this document later
Click NO to delete recovery data for this document
Click Cancel to postpone all document recovery til later"
2. InCopy user - when trying to package email back to InDesign user
"This assignment includes missing or modified links. Low resolution versions will be used for the missing items, and the most recently saved versions will be used for modified links. Continue packaging?"
3. InCopy user - when packaging to send to InDesign user by email
"An error message occured when sending this email"
(and then the package was not attached to the email)
- this is recurring often with only one InCopy user
4. InDesign user received the package back and when they tried to open it, an error message said that the assignments couldn't be found and the file wouldn't open. The file name hadnt been changed and we could find no reason why the package wouldn't open. (sorry, the artist didn't screenshot the actual message for this one).
Any help would be a great help - and stop a mutiny by my editors!

Error message 1 appears when InCopy or InDesign reopens for the first time after a crash. It's try to recover the documents that were open when the program crashed. We often get this error message if files are located on the server and we're not connected, but it could also happen if a file has been moved from it's original location. Whether or not you need to recover the file would drive your response.
Error 2: It sounds like the InCopy package either does not include links or the linked files have been moved or modified since opening the package. If you can relink images after files come back, it's probably OK for them to proceed with packaging. Personally, I uncheck the box that includes images when creating an assignment. The editor will still be able to see greyed out previews of the images, they just won't be available for editing. This also makes package files a lot smaller.
Error 3: This could be a problem with the user's default email client. Instead of having them choose Return for InDesign and Email," have them choose "Return for InDesign" and save it to their desktop. They can then attach the package to the outgoing email manually.
Error 4: Sorry, but I have no idea!
Best of luck,
Matthew

Error message when installing iTunes on my PC: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows installer package

Error message when trying to install iTunes on my Pc:
Using Windows 7, had to replace hard drive. HELP!!
This installation package could not be
opened. Verify that the package exists
and that you can access it, or contact
the application vendor to verify that
this is a valid Windows installer package

Hello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

Error message when installing nvidia-173xx package

I get an error message when I try to install nvidia-173xx driver:
pacaur -S nvidia-173xx
:: Package(s) nvidia-173xx not found in repositories, trying AUR...
:: resolving dependencies...
cat: /usr/lib/modules/extramodules-3.15-ARCH/version: No such file or directory
:: no results found for linux
:: no results found for linux-headers
My kernel version: 3.16.1-1-ARCH
What can I do to install it correctly?

nvidia-173xx AUR page wrote:inux>=3.15.5
linux<3.16
linux-headers>=3.15.5 (make)
linux-headers<3.16 (make)
nvidia-173xx-utils
Looks like you can choose from :
-contact the maintainer to see if you can help with getting it to work with kernel 3.16
- downgrade the kernel
- switch to nouveau
Note that there are comments on the aur page that state nvidia-173xx doesn't work with xorg 1.16, so you may have to downgrade more then just the kernel.

Getting error message when i am trying to update the excel file using script task in ssis package

Hi Guys,
I am getting error message when I am trying to update the excel. Please find the error messages as below
Error at Update File [Update File]: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Application' is not defined., ScriptMain.vb, 32, 32
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Workbook' is not defined., ScriptMain.vb, 33, 25
Error at Update File [Update File]: The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.
Warning at Update File [Update File]: Found SQL Server Integration Services 2008 Script Task "ST_050fcae972904039b4f0fe59b7528ece" that requires migration!
and the code that   I am using is
Dell - Internal Use - Confidential
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.Office.Interop.Excel
<System.AddIn.AddIn("ScriptMain", Version:="1.0", Publisher:="",
Description:="")> _
<System.CLSCompliantAttribute(False)> _
Partial
Public Class ScriptMain
Inherits Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
Enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
End Enum
Public Sub Main()
        Dts.TaskResult = ScriptResults.Success
'Dim proc As System.Diagnostics.Process
'kill all instances of excel
'For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL")
' proc.Kill()
'Next
Dim excelnacomm As
New Microsoft.Office.Interop.Excel.Application
Dim wbnacomm As Microsoft.Office.Interop.Excel.Workbook
        wbnacomm = excelnacomm.Workbooks.Open("http://test.xlsx")(renamed
the excel)
        wbnacomm.RefreshAll()
        wbnacomm.Save()
        wbnacomm.Close()
        excelnacomm.Quit()
        Runtime.InteropServices.Marshal.ReleaseComObject(excelnacomm)
End Sub
End
Class
Please let me know what could be the reason
Smash126

Download:
Microsoft Office 2010: Primary Interop Assemblies Redistributable
How to: Add or Remove References By Using the Add Reference Dialog Box / How to:
Add and Remove References in Visual Studio (C#)
Olaf Helper
[ Blog] [ Xing] [ MVP]

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package. How can I fix this?
Thanks
[email protected]

What is your operating system? Reader version?

Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

Getting error message when attempting to access iTunes store. UNknow error occurred (0x800903318). make sure your netwrok connection is active.

In iTunes software get error message when attempting to access iTunes Store. Could not connect. Unknown error occurred (0xx800903318). Make sure your network connection is active and try again...NG

Hello there,
Thanks for using Apple Support Communities.
Since this error 0x800903318 combined with the network connection error message is occuring when you're trying to connect to the iTunes Store, I'd like you to please follow the steps in the article linked to below.
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
Cheers,
Alex H.

InDesign error message when packaging artwork

When I try to package a particular document I get an error message saying "Cannot copy necessary linked files"
All links are linking correctly from what I can tell. There are no errors in pre flight.
I have tried deleting all the images out of the file and I still get the error message.
I have tried copy and pasting each page into another document and packaging that document but I get the same error message.
I can package other documents no problem - it's just this one that I can't package. I have tried packaging it after a restart, packaging it on another computer and coping the file to my desktop and packaging it from there.
Please help, I need to get this file to a client!

The causes for this are generally either an "illegal character" (typically a slash or asterisk, but could be something else) in a file or folder name, or the length of the path leading to the file is too long.

Getting error message when starting Photoshop CS3

I am getting the following error message when starting CS3:
"This application has failed to start because CML4.dll was not found."
The window title is, "Photoshop.exe - Unable to Locate Component"
Of course, the only button to push is the "OK" button (which should probably read - Something's f-d up. Press here to continue.) After pressing the OK button, CS3 starts and works without issue - so far. I guess I haven't actually used the part of the program that uses CML4.dll or just don't see any difference with or without it.
How can I resolve this issue - without reinstalling PSCS3? and why does it happen in the first place?

Nikon Scanning Software has CML4.dll as part of its package. I assume that the Nikon software did not install/uninstall properly and is causing the error. I have not gone back to do Nikon scans within Photoshop so I do not know if it affects performance. McAfee does not flag it as a virus, and other websites I referred to indicated no viral activity associated with the file.

I want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

i want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

Oliver,
Are you getting activation errors? As Ned stated , it is easier to troubleshoot if we have the specific type of error and error detail that you are getting.
Here is some help on activation if this is the issue:
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Pattie

Adobe Air error message when using PSE 10

When I try using the tips in PSE 10 I get an error message from Adobe Air stating that it is damaged. Have tried uninstalling and re-installing, but that hasn't helped. I have windows 7

Okay Jeff, this is as far as I have gotten so far. I'm using Air version 3.2.0.2070. This is the install log.
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -silent -eulaAccepted -programMenu AdobeHelp.air
Installed runtime (2.6.0.19120) located at C:\Program Files (x86)\Common Files\Adobe AIR
Invoking Application Installer for combined install
Launching subprocess with commandline C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Application Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -runtime C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Installed runtime (2.6.0.19120) located at C:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air to C:\Users\Vette\AppData\Local\Temp\flaE4EA.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla71A.tmp
Native installation package creation succeeded
Starting silent combined runtime update and app install.
Updating runtime from version 2.6.0.19120 to version 2.6.0.19140.
Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 to C:\Program Files (x86)\Adobe using the source file at file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Reinstalling C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp\setup.msi
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla71A.tmp\setup.msi with guid {BD7F1DA3-5EA0-65F8-52B0-5E103FDC045A}
Application Installer end with exit code 0
Subprocess app installer succeeded
Runtime Installer end with exit code 0
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -silent "E:\Adobe Photoshop Elements 10\AdobePhotoshopDotcomInspirationBrowser.air"
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Invoking Application Installer for combined install
Launching subprocess with commandline C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp -silent -withRuntime -url file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Application Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -runtime C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp -silent -withRuntime -url file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air to C:\Users\Vette\AppData\Local\Temp\fla634C.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'PhotoshopdotcomInspirationBrowser' and pubID '4C35C4D325D350FE0114230CBADCA2DDD0AC8D25.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla7325.tmp
Native installation package creation succeeded
Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app PhotoshopdotcomInspirationBrowser.4C35C4D325D350FE0114230CBADCA2DDD0AC8D25.1 version 3.07 using the source file at file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla7325.tmp\setup.msi with guid {4C184855-B85A-6873-C642-60A58682E721}
Application Installer end with exit code 0
Subprocess app installer succeeded
Runtime Installer end with exit code 0
Launching subprocess with commandline C:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -updatecheck
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.6.0.19140/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.6.0.19140/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Unpackaging complete
Download success
Runtime updated downloaded
User has selected immediate install of the update
Starting runtime background update installation
Launching subprocess with commandline C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background\updater -update
Runtime updater successfully launched
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -update
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\airafa3.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_704_0 -ei
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Starting silent runtime update. Updating runtime from version 2.6.0.19140 to version 3.1.0.4880
Installing msi at c:\users\vette\appdata\local\temp\airafa3.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
Runtime Installer end with exit code 0
Elevated install completed
Runtime Installer end with exit code 0
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -updatecheck
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Clearing unused background update directory
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -arp:uninstall
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Runtime Installer end with exit code 6
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\aire7af.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_4784_0 -ei
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Starting silent runtime update. Updating runtime from version 3.1.0.4880 to version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\aire7af.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -arp:uninstall
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\program files (x86)\common files\adobe air\versions\1.0\resources\adobe air updater.exe -eu
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_3840_0 -eu
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Starting runtime uninstall. Uninstalling runtime version 3.2.0.2070
Uninstalling product with GUID {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
No installed runtime detected
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\airbda4.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_764_0 -ei
No installed runtime detected
Starting silent runtime install. Installing runtime version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\airbda4.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
No installed runtime detected
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\air2fa8.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_5396_0 -ei
No installed runtime detected
Starting silent runtime install. Installing runtime version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\air2fa8.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Application Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -playerVersion=11,2,202,233 -sandboxType=remote -securityDomain=airdownload.adobe.com -https=false -fromUserEvent=true -- -url http://www.adobe.com/support/chc/air/350/AdobeHelp.air -- WWW aHR0cDovL3d3dy5hZG9iZS5jb20vc3VwcG9ydC9jaGMv
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Begin air file download from http://www.adobe.com/support/chc/air/350/AdobeHelp.air
Download destination is C:\Users\Vette\AppData\Local\Temp\fla7A97.tmp
Received download status 200
Response URL is http://www.adobe.com/support/chc/air/350/AdobeHelp.air
Download success
Unpackaging file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp to C:\Users\Vette\AppData\Local\Temp\flaB22B.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\flaC7B.tmp
Native installation package creation succeeded
Starting app installation to C:\Program Files (x86)\Adobe. Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 using the source file at file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: Directory can't be written to" errorID=5006]
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)\Adobe" -desktopShortcut -programMenu file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Relaunching with elevation
Application Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_4952_0 -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)\Adobe" -desktopShortcut -programMenu file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp to C:\Users\Vette\AppData\Local\Temp\fla3260.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla3BF3.tmp
Native installation package creation succeeded
Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 using the source file at file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla3BF3.tmp\setup.msi with guid {BD7F1DA3-5EA0-65F8-52B0-5E103FDC045A}
Application Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline C:\Program Files (x86)\Adobe\Adobe Help\Adobe Help.exe
Application Installer end with exit code 0
Date: Thu, 12 Apr 2012 17:10:46 -0600
From: [email protected]
To: [email protected]
Subject: Adobe Air error message when using PSE 10
    Re: Adobe Air error message when using PSE 10
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Vetteski65 I would recommend reviewing Troubleshoot AIR installation | Windows - http://helpx.adobe.com/air/kb/troubleshoot-air-installation-windows.ht ml for steps on how to resolve your difficulties. Please feel free to respond to this thread if you have any questions about the steps listed within the document. If you could also respond with the specific error message you receive it would be appreciated.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4331328#4331328
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4331328#4331328. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Error message when activation a packaging specification in ICH 5.0

Similar Messages

Maybe you are looking for