Error message when assigning WLAN Anchors

Hi All,
I'm creating two guest networks via WCS4.2 (one wired, one wireless), but when I assign the anchor controller (at the foreign controller) to either of them this message appears when I click save:
[ServletException in:/pages/configure/wlan/wlanConfigDetail.jsp] No bean found under attribute key wlanConfigForm'
Also on the wireless LAN config on the anchor controller states it has two anchors even though only one controller address is assigned to it.
Any light shed would be very welcome.
Thanks and Regards,
Scott

Hi Richard,
I decided to concentrate on one at a time (the wired one first) but never considered doing it directly from the WLCs. I'll try deleting all of the config and starting over.
In the current config the part that seems to be at fault now is the internal DHCP, the debugs suggest that the controller is relaying the request rather than responding to it. If I can't get it to work after reconfiguring it I reckon I'll have to resort to an external DHCP server.
Funny though - the n+1 number of anchors seems to have righted itself.
I'll report back ASAP.
Thanks
Scott

Similar Messages

Error message when assign task profile

Hi Expert,
SAP system 4.0B, i create a new activity group in PFCG and assign responsibility in it.
I already generate the responsibility and when i assign to user id in SU01 error message come out.
Profile for activity group not yet generated
Message no. 01 070
Diagnosis
You are assigning a user with an activity group. Although this activity
     group already has a designated profile name, the profile has not yet been
     generated.
System response
The user does not yet have the designated profile.
Procedure
Use the Profile Generator if you want to generate a profile. Remember
     that you that you must execute a user comparison once you have generated
     the profile.
As i already generate the activity, why the system still say that the activity group not yet generated?
Please advice.
Thanks
regards,
ng chong chuan

Hi Alex Ayers,
The error when double click, there was nothing pop up.
After generation in SUPC for responsibility RY type and the status show "Generation here not allowed/possible".
SAP version 4.0B.
Please advice.
Thanks.
regards,
ng chong chuan

This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on a terminal server

Hi All,
I have Citrix VDI (Virtual Desktop Infrastructure) Implemented
in my company and installed few Applications on App Server lets say.... MS Office 2013, filzialla, putty, etc...
I assigned these apps to the users through CITRIX STUDIO, when I try to use these apps. on VDI everything is working fine only when i tried to open Word, Excel or Powerpoing, outlook it throws error as
""This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on
a terminal server"" and apps gets closed.
Please help me on this ASAP.
Thanks & Regards,
Sachin Shinde

Hi,
As mentioned in ths article below, run for Office 365 products on to a Remote Desktop Session Host server is not supported. You can install Office products for Office 365 to a virtual desktop, but the virtual desktop must be assigned to a single user.
http://technet.microsoft.com/en-us/library/jj219423(v=office.15).aspx
Regards,
Melon Chen
TechNet Community Support

Error Message when we create a Service Ticket in SAP CRM 2007

Hi All we are having a serious production issue when we create a S.Ticket in SAP CRM 2007 We get the following error message we are not trying to send any information to R/3 We have a planned go live this saturday. So any help would be greatly appreciated.
An error occurred in system EDIES during account assignment
Message no. CRM_ORDER_MISC 060
Diagnosis
Errors occurred when assigning an account assignment object to a business transaction. To view the error message, see the accompanying log file.
Transfer Log
No controlling type could be determined (Notification E IAOM 012)
No controlling type could be determined (Notification E IAOM 012)
Regards
Sathya

Hi,
I have looked into your issue.
For this service ticket, kindly check the Org Unit maintained in Transaction and table OFIC_BILLORG_SRV are same. If not same kindly make changes in the following path in SPRO.
==> SAP Implementation Guide
==> Customer Relationship Management
==> Organizational Management
==> Cross-System Assignment of Organizational Units
==> Assign Billing Units to Service/Sales Organizations
If the above information is not helpful kindly take a look at note 861116.
I hope this helps.
Regards,
Venkat

Error message when logging into WAS/UI

I receive the following error message when I log onto the WAS/UI.
Logon is not possible because you have not been assigned to a business role; contact your system administrator
I know that I need to be assigned to business role, but how (which transactions) can I do this. My Funtional guy is away at the moment.
Regards
Jason

Hi,
check this thread [Business role not assigned..;.
You should be able to solve the problem assigning a business role via parameter CRM_UI_PROFILE in Tx. su01.
Possible values are for example MARKETINGPRO, SALESPRO.
Regards, Arne

Error message when trying to download purchased songs

I purchased some albums on my ipad that synced to my iphone. I'm now trying to download my purchases to my library stored on my PC, but I'm getting an error/warning message along the lines of:
"You can download past purchases for up to 90 days.....You cannot assign another apple id to this computer for the next 30 days".
Does anyone have any ideas? I did have to sign my wife out of itunes before i signed in to download my songs so i assuming its something to do with that.

When trying to download purchased songs on ITunes, it
gives an error message that the network connection
timed out. also gives this error message when I try
to download ITunes software. Can anyone help with
this error? Thanks
I am having the same problem. (err = -3259) and it's not listed in any of the error codes in Apple Support. Weird. Why have an error code and no reference for it.
First it happened when I tried to download a movie and I kept "checking for purchases" - didn't work - checked all my ad filters, privacy filters, firewall settings - didn't work. Then I forgot for a day, went back and it worked. Now I have three episodes of a TV show that will not download and I am getting the same error message. This time it has been a few days though...Someone who knows - Please HELP!!

How to set the error message when LIV amount over PO amount ?

Dear experts :
I create a PO without GR base IV , and I have setting limit in OMR6.
I hope system show error message when the LIV amount over PO amount .
But in fact , when LIV amount over PO amount , the system didn't show any message.
Hope someone can tell me ,besides OMR6, what setting I need do?
Thanks a lot.

Please use T code OMR6 & assign tolerance key for plant & Tlky -> BD TO "zero".
Regards
Bhavesh Mistry

There is the error message when we run IR8A report

Hi SAP expert,
There is the error message when we run IR8A report via T-code PC00_M25_NCT8A, below is the error message
"Assignment to valuation model is missing for calculation process 25 SGLS
Message no. HRSEN00107
Diagnosis
There is no entry in the assignment table for valuation model and rounding rule (V_T525S) for the return value for feature SENOR on the key date 07.12.2007 for the selected calculation process 25 SGLS (country grouping, calculation process, process step).
At least one valuation model must be assigned to each calculation process in view V_T525S.
Procedure
Make an entry for this calculation process and return value for feature SENOR in view V_T525S (Assignment of Valuation Model and Rounding Rule).
I would appreciate you very much if you could advise me how to solve this problem.

Hi ,
I am facing the same error like this,
please let how did you solve this iisue ?
thakn\s

Error Message When Importing Bookmarks From A Network Share

An error message is generated whenever I try to import bookmarks.html from a network share on kubuntu. This same operation is sucessful on the windows version of firefox.
To replicate:
The bookmarks.html is created by Firefox 3.68 on windows 7. And is saved to a network share location. When trying to import this file into firefox 3.6.8 on my kubuntu 10.04 machine, I get the error message/window titled: remote files not accepted. The message states: You can only select local files.
If I copy bookmarks.html local to the kubuntu machine, it imports without error.
On windows, I can import bookmarks.html from the network share without error.
Does anyone know why I can't import across the network on the kubuntu version?
browser being run on windows 7:
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
browser being run on kubuntu 10.04:
Firefox 3.6.8 Mozilla Firefox for Ubuntu canonical - 1.0.

It appears to be any remote file, not just the bookmarks file. When trying to upload a file to a website, firefox threw up the same error:
error message/window titled: remote files not accepted. The message states: You can only select local files.
So what is it about files that are sitting on a server, firefox and kubuntu that causes this? I don't get the error message when using win7 on the same files.

Error message when launching PowerPivot Window using Excel 2010

I have installed the latest version of Powerpivot on several of our workstations. Some of them are running the application just fine and some of them are getting an intermittent error message when trying to launch the PowerPivot Window.
We are running Windows 7 ENT 32bit with Office 2010 32bit
The error message given is : An operation that uses the database driver could not be completed. If the driver is a Microsoft driver, make sure the drvier file isn't damaged, and if it is, reinstall the driver by re-installing Microsoft Query.
You can then try again and it will work.
In fact the majority of the time this error message won't appear.
The application has been removed and reinstalled.
When I checked event viewer i'm finding this error which I think is related
The description for Event ID 1 from source MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted.
Hello,
It's just a guess: Power Pivot uses the MSOLAP = "Microsoft OleDB Provider for OLAP" and maybe that Provider is damaged on the machine. You may try to reinstall the Provider, you can get the installer named "SQL_AS_OLEDB.msi" from
Microsoft® SQL Server® 2012 SP2 Feature Pack =>
ENU\x86\SQL_AS_OLEDB.msi (for 32 bit)
Olaf Helper
[ Blog] [ Xing] [ MVP]

Error message when starting MaxDB instance

I am getting the following Error message when starting the MaxDB instance after a series of failed attempts at starting the DB Manager Backup for our PI 7.1 server.
"-24994,ERR_RTE: Runtime environment error
1,Cannot create ipc db directories for SID (OS error code 11000)"
Max DB version : 7.7.02
Does anyone have any specific pointers on where the issue could be.
Any help is greatly appreciated.
Regards,
Murali Narayanan

Hi gurus,
I'm a complete newbye searching the forums in order to decrypt what is inconsistent to me (I'm acting as a substitute for a real dba): a sapdb refusing any more connection due to an 'user space exhausted' issue.
I do not even know if/where some admin tool is/isn't installed - eventually, what to look for - onto the running demianapachetomcat framework. Actually, all I have been provided was: 1. call 'Henplus' (done); 2. connect this way (jdbc:sapdb://localhost/database&options) and 3. select, upgrade, delete what needed. Problem arises on point (2): connection resufed 'user space exhausted'.
My question is: this issue seems so similar to mine, how can one eventually check/modify this '/sapdb directory space'?
Thanks in advance for any (much appreciated) hint, and be patient about my English and newbyeness (?).
MaxM

Error message when Closing PS CS6

I keep receiving a error message when closing PS CS6 which says "Adobe Media Core CS6 has stopped working"
What can I do to resolve this issue?
I'm running Windows Vista professional

If you want help you may have to provide some more information … and a Forum- or web-search might also be worth trying.
http://forums.adobe.com/message/4509053
http://forums.adobe.com/thread/1025148
http://forums.adobe.com/message/4495683

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

Error Message when printing handouts

First, I know this has already been discussed in these forums. I tried the proposed solution in this thread http://forums.adobe.com/message/6273232#6273232 and it still didn't fly. I'll go ahead and bust out a full explanation of the issue for those of you who may not want to navigate to the other thread:
I'm getting the following error message when trying to publish my project as a handout:
I'm launching Cap 7 in admin mode on a windows 8 machine and trying to publish to Word 2013.
I'll select a publish location and start the publish, it gets to 10% and then stalls out (the error message doesn't appear at this time). If I hit alt+tab, I'll see a "Save as" window. I'll reselect the directory and name the file correctly and hit save. That moves the progress bar to 100% and the error message appears. I've tried to copy and paste the slides to a new project and the same thing occurs. From what I've seen, others have had this problem but I've yet to see a confirmed fix. If you've run into the issue and solved it, please let me know. Is there a word plugin I need to install? Is there a way to bamboozle my handouts from captivate to .pdf to word? That would be cumbersome but I'm not scared to try it.
Thanks in advance,
Eric

Have you tried with system PLD?
Thanks,
Gordon

Error message when trying to open windows7 via vmwarefusion.

error message when trying to open windows7 via vmwarefusion.;
Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere? I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp? It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up. I'm almost certain it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
I've uninstalled vmare completely and reinstalled, it, but the problem persists.
Any help?

You will probably get a better response asking this question in VMWare's forums for Fusion.
Best of luck.

Error message when assigning WLAN Anchors

Similar Messages

Maybe you are looking for