Error message when attempting to burn a CD

I get and error message that reads: "The Attempt to burn a dis failed. An unknown error occurred: 2123"
I am able to burn discs through media player, so it's not the drive.
I have reinstalled itunes.
Help?
Dell Windows XP

You'll get instructions on this page: About iTunes Music Store Authorisation and Deauthorisation

Similar Messages

Error message when attempting to burn idvd project

please help. I have recently created several movies from vhs with no problems in idvd, the latest one is giving me problems though.
i created the movie in imovie and shared it with idvd (no problems) used the same exact theme as the other two movies (made sure there were no error messages in any of the menus) and clicked burn. Everything appears to encode properly, but i get an error message in the burn stage and need to force quit to exit idvd. after three attempts i now also get a "multiplexor" error.
I tried to make a burn disc with a small file to see if the superdrive is functioning properly and it seemed to take forever (never happened before)
Any ideas? I'm trying to get this done before Christmas.

alright, i added new ram, so i am running 2 gigs now, tried again...failed. i get all the way to burn and a popup comes up saying burning finished errors found during the burning process, i click ok and the burning wheel is still turning and i need to force quit to get out of idvd. i might go crazy, so any help is appreciated.

Receiving "Fatal Error" message when attempting to burn BluRay

I have completed a BluRay project and am trying to burn to a BluRay. The process goes fine until it starts the burn process. The project is about 19g and I am ttrying to burn to a 25g bluray BD-R. It takes about 6 hours to go through the process. When the progress meter shows 100%, it goes into the burn process and after only a few minutes, I receive a "Fatal Error" message and that's it, no further messages and nothing written to the bluray. I end up clicking on the "cancel" button which takes me back to the project.
Running Elements 7.0 on Windows 7 with plenty of horsepower. Can give specifics if someone thinks that could be the problem. Is there a way to burn the HD project to the computer and then use other software to burn to my Bluray internal burner??

Hi All,
I have a similar error with the config details below.
The work-around that I found was to end all processes that have nothing to do with PrE - especially McAfee and GoogleDeskTop stuff (sorry if I am getting close to the line citing names - but it does seem to be related) and to put PrE in high priority using the Windows Task Manager / Processes facility.
This solution does work even with chapters although I have not yet been able to burn a BD with menus yet - this may be due to the version 4.0 of PrE that I am using.
My issue was all the more frustrating in that my project lasting approx 90mins in realtime was taking approx 25hrs (> 1 day) to render to AVCHD, And after rendering, the Fatal Error msg appeared but PrE was locked and the only way to get out was to end process PrE and restart Windows - no intermediary AVCHD file was saved so I had repeated this process several times over a week before finding this solution after reading this website,
What a shame; I had bought a new powerful laptop with PrE 4.0 and a BD writer pre-installed and yet it seems to hard to get a basic BD !!
In case it can be of interest, I compared burning BDs using AVCHD and MPEG-2 (1920X1020) and, on my 40"LCD I cannot really see any difference in quality. As the MPEG-2 renders and burns in approx 1/10th time of AVCHD, I think that I'll be sticking to this compression.
Here are the details of the system:
Intel Pentium CoreDuo 2.26GHz
Windows Vista
4Gb DDR2
500Gb internal drive with over 50% free
Source HDV footage stored on external 320Gb HDD via USB2.
PrE4.0
I hope that this helps.

Error message: "The attempt to burn a disc failed. An unknown error"

Anyone having this error message after attempting to burn a disc?
I have 6 discs sitting here ruined after this happened consistently.
Called Apple tech support. Said they never heard of this.
What can I do to resolve? Tried doing the iTunes update and that does not appear to have helped. I am beyond frustrated. To not be able to burn all my purchased music to cd's is not making me a happy camper.
Anyone have any ideas how to fix?
Thanks for all suggestions..

Hey guys, having same type of problem and figured I would throw in my 2 cents. I was getting "error 4000"; i Googled that and followed the procedures for going to my control panel, add/remove and clicking repair. I tried a burn again, also paying attention to previous notes and lowered my write speed to 8X. Same error, different number, this time 4261. I found this thread so I decided to paste my info too, but i do notice the last line of code reads "speed 10X". Hope this helps? I have burned plenty of CDs before, I am burning a mix of MP3 and MP4, amazon and apple purchased, and using older memorex CD-R. They say "recordable, 52X, 700mb, 80 min" at the top. Hope it helps and thanks for the time and effort on here!
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Dell Inc. Inspiron 1464
iTunes 10.0.1.22
QuickTime 7.6.8
FairPlay 1.9.16
Apple Application Support 1.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.2.0.47
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.3.0 (214.3)
Gracenote SDK 1.7.1.420
Gracenote MusicID 1.7.1.78
Gracenote Submit 1.7.1.106
iTunes Serial Number A13F95689B6E935E
Current user is an administrator.
The current local date and time is 2011-03-18 21:25:19.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.0.1.22 is currently running.
iTunesHelper 10.0.1.22 is currently running.
Apple Mobile Device service 3.2.0.0 is currently running.
** CD/DVD Drive Tests **
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
E: HL-DT-ST DVD+-RW GT30N, Rev A101
Audio CD in drive.
Found 15 songs on CD, playing time 69:43 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:28:41
Track 3, start time 07:28:54
Track 4, start time 11:36:32
Track 5, start time 15:58:57
Track 6, start time 20:26:51
Track 7, start time 25:01:74
Track 8, start time 29:43:02
Track 9, start time 34:25:65
Track 10, start time 39:19:72
Track 11, start time 44:14:37
Track 12, start time 49:13:50
Track 13, start time 54:14:42
Track 14, start time 59:16:04
Track 15, start time 64:17:54
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 10 16 24.
The drive CDRW speeds are: 10.
The drive DVDR speeds are: 10.
The drive DVDRW speeds are: 10.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive E: HL-DT-ST DVD+-RW GT30N on CDR media at speed 10X.

Error message when attempting to view the video.

When attempting to watch a video posted to Facebook or on a forum, I get an error message when attempting to view the video. "An error occurred while processing your request. Reference #50.8dd8d3d1.1354457866.1cac8e50". I'm able to view videos via YouTube. The error seems to occur when video are embedded in a post/thread.

I was hoping someone could provide some help.

Error message when attempting to use scanner Canon model MP610

Error message when attempting to use scanner Canon model MP610, any one have any fixes, suggestions?

Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, empty trash, reboot when complete.
For the other problems...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?

Error message when attempting to install itunes 0x80070BC9

Error message when attempting install of itunes 0x80070BC9

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Error message when attempting to run aam

I am encountering error message when attempting to run aam - Please connect to the internet, then try again when I am already connected

Please see Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for common resolutions to these difficulties.

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Getting error message when attempting to access iTunes store. UNknow error occurred (0x800903318). make sure your netwrok connection is active.

In iTunes software get error message when attempting to access iTunes Store. Could not connect. Unknown error occurred (0xx800903318). Make sure your network connection is active and try again...NG

Hello there,
Thanks for using Apple Support Communities.
Since this error 0x800903318 combined with the network connection error message is occuring when you're trying to connect to the iTunes Store, I'd like you to please follow the steps in the article linked to below.
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
Cheers,
Alex H.

TS3694 Error message when attempting to back up iPod to iTunes, no number given. No previous back ups as a new user, current iTunes software and iPod iOS.

Error message when attempting to back up iPod to iTunes, no number given. No previous back ups as a new user, current iTunes software and iPod iOS.

The issue you are experiencing is with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
I understand that you have already uninstalled iTunes, but when you get to this step, it is important to uninstall iTunes and the related components in the order listed in the link for that step.

Why do I get an error message when attempting to download music into a project in Ellements 13?

Why do I get an error message when attempting to download music into a project in Ellements 13?

cornman30
What computer operating system?
And, where is the music coming from, iTunes? If so, that is a known problem with Premiere Elements (just about any version).
The answer has been to convert the iTunes music to the wav version in iTunes.
The following is the iTunes' document how to.
iTunes: How to convert a song to a different file format - Apple Support
Any questions, please do not hesitate to ask.
If other than above, please supply more details to help us help you.
Thank you.
ATR

I am receiving the following error message when attempting to text to a valid mobile/cell number in Peru.

I am receiving the following error message when attempting to text to a valid Mobile/Cell number in Peru...Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code.
I am able to receive texts from the number in question, but not able to text back to the person sending.
The number is a valid 9 digit cell/mobile number.

If you're sending as SMS (green bubble) then this is a carrier issue and not an issues with your phone.
To text internationally, you nearly always need to include the country code before the rest of the phone number. If you are doing so and still have issues, contact your carrier.
~Lyssa

Trying to burn CD but keep getting error message "The attempt to burn a disc failed. The burn failed because of a medium write error. Tried different speeds with no luck

trying to burn CD but keep getting error message "The attempt to burn a disc failed. The burn failed because of a medium write error. Tried different speeds with no luck

The burn failed because of a medium write error. Tried different speeds with no luck
Then try to use a different brand of DVD or at least a different batch of DVD. The disk may be defective.

TS3212 I have removed my pop-up blocker completely and still receive the following error message when attempting to download iTunes: "The file was blocked because it does not have a valid digital signature that verifies its publisher".....any ideas?

have removed my pop-up blocker completely and still receive the following error message when attempting to download iTunes: "The file was blocked because it does not have a valid digital signature that verifies its publisher".....any ideas?

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Error message when attempting to burn a CD

Similar Messages

Maybe you are looking for