Error Message when booting from System CD's
Ill advised I put a OSX disk in my hardly used iMac CRT G4 with 64meg of RAM. I did not know about the firmware upgrade required. Discovering my error I tried to use the System Recovery / Install CDs that came with the machine.
When booting from the CD all goes well until about 50% into the boot and then the following error appears on the screen
interfaceLib -- MgmError with a button to reboot the machine and make sure that the C button is held down on the keyboard. BUT the mac is trying to boot from the CD. Holding down the C button makes no difference. Holding down the shift key (preventing the extentions) gets past the error BUT the system restore or system install programs will not run.
Help! I am really stuck
Not only were you suppose to update your firmware, you also needed to purchase more RAM. The minimum RAM requirement for OS X is 128mb. However, Cat System users strongly recommend 256mb+.
Suggest you check out the following links & see the section on "Tray Loaders".
iMac (CRT) (FAQ)>
User-Contributed Tips & Answers>Fixing iMac(CRT) firmware/OS X problems
Firmware Problem Solver Thanks to Giles Kennedy.
Good luck.
Similar Messages
-
Error messages when booting up
Receive 3 error messages when booting up PS using Win 8. "Could not load the FastCore Routines Module, could not load the MMX Core, could not load the Multiprocess Support Module." Any explanation?
Ah-ha! Seems there are two Adobe program folders, one under Program Files and one under Program Files (x86). I did not know about the one under Program Files.
According to System Info:
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Creative Cloud app keeps wanting to update Photoshop CC but keeps failing. The error code is U44M1P7.
Following is all of the System Info, showing the third-party plug-ins that I installed a few hours ago from onOne and Topaz. I can't see anything odd in this, and System Info says all the plug-ins loaded.
Thanks for your help.
Quote
Adobe Photoshop Version: 14.1.2 (14.1.2 20130923.r.427 2013/09/23:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 3093 MHz
Built-in memory: 6088 MB
Free memory: 4429 MB
Memory available to Photoshop: 5289 MB
Memory used by Photoshop: 59 %
Image tile size: 1024K
Image cache levels: 4
Display: 1
Display Bounds: top=0, left=0, bottom=900, right=1600
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=2108
gpu[0].RectTextureSize=8192
gpu[0].Renderer="Intel(R) HD Graphics 2000"
gpu[0].RendererID=258
gpu[0].Vendor="Intel"
gpu[0].VendorID=32902
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.17.10.3347"
gpu[0].Driver="igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd32"
gpu[0].DriverDate="20131031000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLSupported=0
gpu[0].CUDASupported=0
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Intel Build 9.17.10.3347"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[512]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[1024]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[41]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
Serial number: 96040202581963319193
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: C:\Users\RUSSEL~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 1.35T, 1.10T free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Installed components:
ACE.dll ACE 2013/07/14-12:09:50 79.543790 79.543790
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdobeLinguistic.dll Adobe Linguisitc Library 7.0.0
AdobeOwl.dll Adobe Owl 2013/03/03-12:10:08 5.0.13 79.533484
AdobePDFL.dll PDFL 2013/03/13-12:09:15 79.499517 79.499517
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1786
AdobeXMP.dll Adobe XMP Core 2013/03/13-12:09:15 79.151481 79.151481
AdobeXMPFiles.dll Adobe XMP Files 2013/03/13-12:09:15 79.151481 79.151481
AdobeXMPScript.dll Adobe XMP Script 2013/03/13-12:09:15 79.151481 79.151481
adobe_caps.dll Adobe CAPS 7,0,0,21
AGM.dll AGM 2013/07/14-12:09:50 79.543790 79.543790
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
aif_core.dll AIF 5.0 79.534508
aif_ocl.dll AIF 5.0 79.534508
aif_ogl.dll AIF 5.0 79.534508
amtlib.dll AMTLib (64 Bit) 7.0.0.169 BuildVersion: 7.0; BuildDate: Mon Apr 8 2013 2:31:50) 1.000000
ARE.dll ARE 2013/07/14-12:09:50 79.543790 79.543790
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2013/07/14-12:09:50 79.543790 79.543790
BIBUtils.dll BIBUtils 2013/03/19-12:09:02 79.535293 79.535293
boost_date_time.dll DVA Product 7.0.0
boost_signals.dll DVA Product 7.0.0
boost_system.dll DVA Product 7.0.0
boost_threads.dll DVA Product 7.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.6.30929 2.1.6.30929
CITThreading.dll Adobe CITThreading 2.1.6.30929 2.1.6.30929
CoolType.dll CoolType 2013/07/14-12:09:50 79.543790 79.543790
dvaaudiodevice.dll DVA Product 7.0.0
dvacore.dll DVA Product 7.0.0
dvamarshal.dll DVA Product 7.0.0
dvamediatypes.dll DVA Product 7.0.0
dvaplayer.dll DVA Product 7.0.0
dvatransport.dll DVA Product 7.0.0
dvaunittesting.dll DVA Product 7.0.0
dynamiclink.dll DVA Product 7.0.0
ExtendScript.dll ExtendScript 2013/03/21-12:10:31 79.535742 79.535742
FileInfo.dll Adobe XMP FileInfo 2013/03/19-12:09:02 79.151561 79.151561
filter_graph.dll AIF 5.0 79.534508
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
imslib.dll IMSLib DLL 7.0.0.116
JP2KLib.dll JP2KLib 2013/02/19-12:28:44 79.248139 79.248139
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OMP Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1785
mediacoreif.dll DVA Product 7.0.0
MPS.dll MPS 2013/03/15-13:25:52 79.535029 79.535029
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
ONCore7.dll ONCore 7.0.0.0
ONCore8.dll ONCore 7.0.0.0
ONCoreFoundation7.dll ONCoreFoundation7 7, 0, 0, 0
ONCoreFoundation8.dll ONCoreFoundation7 7, 0, 0, 0
ONDocument7.dll ONDocument 7.0.0.0
ONDocument8.dll ONDocument 7.0.0.0
ONProxySupport7.dll ONProxySupport 1.0.0.0
ONProxySupport8.dll ONProxySupport 1.0.0.0
PatchMatch.dll PatchMatch 2013/06/11-12:08:08 79.542390 79.542390
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC CC
Plugin.dll Adobe Photoshop CC CC
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 4.0.1.34
PSArt.dll Adobe Photoshop CC CC
PSViews.dll Adobe Photoshop CC CC
SCCore.dll ScCore 2013/03/21-12:10:31 79.535742 79.535742
ScriptUIFlex.dll ScriptUIFlex 2013/03/21-12:10:31 79.535742 79.535742
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
updaternotifications.dll Adobe Updater Notifications Library 7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 7.0.1.102
WRServices.dll WRServices Mon Feb 25 2013 16:09:10 Build 0.19078 0.19078
Required plug-ins:
3D Studio 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Accented Edges 14.0
Adaptive Wide Angle 14.0
Angled Strokes 14.0
Average 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Bas Relief 14.0
BMP 14.0
Camera Raw 8.0
Camera Raw Filter 8.0
Chalk & Charcoal 14.0
Charcoal 14.0
Chrome 14.0
Cineon 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Collada 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Color Halftone 14.0
Colored Pencil 14.0
CompuServe GIF 14.0
Conté Crayon 14.0
Craquelure 14.0
Crop and Straighten Photos 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Crop and Straighten Photos Filter 14.0
Crosshatch 14.0
Crystallize 14.0
Cutout 14.0
Dark Strokes 14.0
De-Interlace 14.0
Dicom 14.0
Difference Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Diffuse Glow 14.0
Displace 14.0
Dry Brush 14.0
Eazel Acquire 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Embed Watermark 4.0
Entropy 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Extrude 14.0
FastCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Fibers 14.0
Film Grain 14.0
Filter Gallery 14.0
Flash 3D 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Fresco 14.0
Glass 14.0
Glowing Edges 14.0
Google Earth 4 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Grain 14.0
Graphic Pen 14.0
Halftone Pattern 14.0
HDRMergeUI 14.0
IFF Format 14.0
Ink Outlines 14.0
JPEG 2000 14.0
Kurtosis 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Lens Blur 14.0
Lens Correction 14.0
Lens Flare 14.0
Liquify 14.0
Matlab Operation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Maximum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Mean 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Measurement Core 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Median 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Mezzotint 14.0
Minimum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
MMXCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Mosaic Tiles 14.0
Multiprocessor Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Neon Glow 14.0
Note Paper 14.0
NTSC Colors 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Ocean Ripple 14.0
Oil Paint 14.0
OpenEXR 14.0
Paint Daubs 14.0
Palette Knife 14.0
Patchwork 14.0
Paths to Illustrator 14.0
PCX 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Photocopy 14.0
Photoshop 3D Engine 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Picture Package Filter 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Pinch 14.0
Pixar 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Plaster 14.0
Plastic Wrap 14.0
PNG 14.0
Pointillize 14.0
Polar Coordinates 14.0
Portable Bit Map 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Poster Edges 14.0
Radial Blur 14.0
Radiance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Range 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Read Watermark 4.0
Reticulation 14.0
Ripple 14.0
Rough Pastels 14.0
Save for Web 14.0
ScriptingSupport 14.0
Shake Reduction 14.0
Shear 14.0
Skewness 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Smart Blur 14.0
Smudge Stick 14.0
Solarize 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Spatter 14.0
Spherize 14.0
Sponge 14.0
Sprayed Strokes 14.0
Stained Glass 14.0
Stamp 14.0
Standard Deviation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
STL 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Sumi-e 14.0
Summation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Targa 14.0
Texturizer 14.0
Tiles 14.0
Torn Edges 14.0
Twirl 14.0
Underpainting 14.0
Vanishing Point 14.0
Variance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Variations 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Water Paper 14.0
Watercolor 14.0
Wave 14.0
Wavefront|OBJ 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
WIA Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Wind 14.0
Wireless Bitmap 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
ZigZag 14.0
Optional and third party plug-ins:
Perfect Batch 8 8.1.0
Perfect BW 8 8.1.0
Perfect BW 8 Filter 8.1.0
Perfect BW 8 Smart Filter 8.1.0
Perfect Effects 4 4.0.4
Perfect Effects 4 Filter 4.0.4
Perfect Effects 4 Smart Filter 4.0.4
Perfect Effects 8 8.1.0
Perfect Effects 8 Filter 8.1.0
Perfect Effects 8 Smart Filter 8.1.0
Perfect Enhance 8 8.1.0
Perfect Enhance 8 Filter 8.1.0
Perfect Enhance 8 Smart Filter 8.1.0
Perfect Mask 8 8.1.0
Perfect Mask 8 Filter 8.1.0
Perfect Mask 8 Smart Filter 8.1.0
Perfect Portrait 8 8.1.0
Perfect Portrait 8 Filter 8.1.0
Perfect Portrait 8 Smart Filter 8.1.0
Perfect Resize 8 8.1.0
Perfect Resize 8 Engine Automation 8.1.0
Perfect Resize 8 Engine Filter 8.1.0
Perfect Resize 8 Filter 8.1.0
Topaz Adjust 5 10.0
Plug-ins that failed to load: NONE
Flash:
Kuler
Adobe Exchange
Installed TWAIN devices: NONE -
Error message when publishing from Captivate 4 to MS Word 2003
Is anyone else getting an error message when publishing from Captivate 4 to MS Word 2003? I tried all 4 types and still get the following:
"An error was encountered while publishing to Word. Verify the following and try again. Word is installed on your system. Word is not busy."
Word is installed on my system and was not in use, so I am not sure why the error. Any thoughts?
Thanks in advance!Hi there
I use Captivate 4 and it publishes to Word 2003 without issues.
Perhaps it has to do with the way your Word 2003 has been installed? Either that or it's a "rights" issue to be addressed by your IT propellerheads?
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks -
Error message when copying from Acrobat Reader
Error message when copying from Acrobat Reader - any file, any time (Win 7, Adobe many versions until recent).
Copy works, but causes a needless and useless error message that has to be clicked away every time.
This problem is published on the web for a million times without a working solution. And even in the Adobe forum no qualified answer (http://forums.adobe.com/thread/441370)
When can I expect a solution?"101 Views 0 Replies
Was this helpful?"
Of course not.
But thank you anyway, I talked to my admin and we changed the whole company to Foxit.
It can be that easy. -
Error message when changing from portrait to landscape when printing
I receive an error message when changing from portrait to landscape when trying to print. How do I resolve this issue?
Hi hillclimbing,
Can you please let me know the exact error message you see as that would be helpful.
Does this occur with all the pdf files.
What OS and Acrobat version are you using?
Regards,
Rave -
I get an error message when importing from iPhoto that says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space." the drive is empty, I just reformatted it to Mac OSX journaled.
I'm guessing this is an extrenal drive, correct? If so make sure the library you're importimng into is really located on the external drive. By default Aperture creates its library in your home pictures folder.
-
Error message when downloading from Google Play Store
After recently doing the toshiba system update for my AT300-32gb tablet I now get the following error message when downloading free apps from Google Play Store -Error processing purchase {DF-BPA-13].
Automatic update for downloaded apps no longer works either. Anyone have a solution to this?Go into your settings and touch "apps" on the left. Then touch "Google Play services" and tap "Clear data" and "Clear cache." Then touch "Apps" again on the left. Now do the same for the "Google Play Store" entry. Then hold down the power button until it asks if you want to turn it off. Go ahead and turn off the tablet. Then turn it back on and try again.
- Peter -
Logic crashing when booting from system drive clone
Hi,
So I've been copying system drive clones to another drive for backup, but I find when booting from the (internal HD) clone, Logic 9 will consistently crash on me when trying to open various brands/types of plug-ins.
For cloning I've tried SuperDuper, which I own, and Carbon Copy Cloner, which I'm running the 30 day trial of, and had identical results.
Yeah I know it's lame to be using Logic 9, but I have several important projects originally started on 9 that I need to be finishing up now, and those projects don't play nicely with Logic X.
I'd like to update my OS and Logic X versions, but want to have a working system clone before risking it.
Suggestions?
Thanks.Um right after posting the query I remembered what I had learned probably right here back in yesteryear, and that is there is one thing that doesn't translate in the clone.
When doing Get Info on the Logic 9 app, there is a check box for "Open in 32-bit mode". I need to have that unchecked, so I can run in 64-bit mode, but for the "clone", that box gets automatically checked, it is NOT actually a clone, hence the issue I was having with plug-ins causing crashes.
Un-checking that box on the clone solved my issue. -
I get a Pre-execute error message when importing from Excel using the wizard.
Hello, I get the following pre execute error message(see below) when I try to import a table from Excel when using the wizard. I wrote my own code in the edit window. i noticed after writing it that the data types did not appear changed in the mappings window.
Can anyone explain what these errors mean and how they can be solved. Thank you.
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Success)
Messages
* Warning 0x80049304: Data Flow Task 1: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator,
or on the system's console.
(SQL Server Import and Export Wizard)
- Prepare for Execute (Success)
- Pre-execute (Error)
Messages
* Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Unspecified error".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "The metadata could not be determined because every code path results in
an error; see previous errors for some of these.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid object name 'dbo.PriceTable$'.".
(SQL Server Import and Export Wizard)
* Error 0xc0202040: Data Flow Task 1: Failed to open a fastload rowset for "[dbo].[PriceTable$]". Check that the object exists in the database.
(SQL Server Import and Export Wizard)
* Error 0xc004701a: Data Flow Task 1: Destination - PriceTable$ failed the pre-execute phase and returned error code 0xC0202040.
(SQL Server Import and Export Wizard)
* Information 0x4004300b: Data Flow Task 1: "Destination - PriceTable$" wrote 0 rows.
(SQL Server Import and Export Wizard)
- Executing (Success)
- Copying to [dbo].[PriceTable$] (Stopped)
- Post-execute (Stopped)
frustrationmultipliedHello,
Are you willing to try other ways to do the same?
http://www.excel-sql-server.com/excel-import-to-sql-server-using-linked-servers.htm
http://support.microsoft.com/kb/321686 (Distributed queries)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Getting weird error message when booting up our computer
when booting up our iMac, we get a gray screen with an error message in 4 languages saying: "you need to restart your computer"
upon restarting, we keep getting the same message.
at the same time we noticed that the screen was very fuzzy... I re-starting holding commandoption+pr to re-set the pram. that worked to get the screen clear, but i still ended up on the same message.
after a few re-starts, the screen went back to the fuzzy view.
I have also already checked the led lights on the back to assure that the power supply was working appropriately, and i got all 3 lights ON and solid. the 4th light (overheating) was not coming on...
any ideas or recommendations??
Tks
LeoWhat you are seeing is called a 'Kernal Panic'.
What is a Kernel Panic?
http://docs.info.apple.com/article.html?artnum=106227
Try this:
Repairing permissions is an important part of regular maintenance, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two.
Background information here:
http://docs.info.apple.com/article.html?artnum=25751
and here:
http://docs.info.apple.com/article.html?artnum=302672
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.
More useful reading here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417 -
Udev-acl error message when booting after removing consolekit
Hi all,
I remove consolekit (using pacman -Rdds consolekit) after the announcement, but when I reboot I see a lot of error messages (although my system boots OK):
Nov 1 19:43:42 localhost systemd-udevd[1122]: failed to execute '/usr/lib/udev/udev-acl' 'udev-acl --action= --device=': No such file or directory
Sure enough, no udev-acl executable under /usr/lib/udev
any idea on how to get rid of this annoying message on booting?Interestingly problem not there on my 32 bit system on my netbook, only on my 64-bit [multilib] desktop
-
IDVD error message when sharing from imovie
1. When "sharing" from imovie to idvd, error message appears reading: "unable to publish project due to error-41."
2. Successfully "shared" once, with the first clip upside down.
Thank you for your insights.Hi
Most probably it's the Start-Up/Boot/Mac OS hard disk that has less than 5Gb free space.
To let iDVD run OK - This Start-up hard disk should have 25Gb or more due to that
Your Mac is running a sort of UNIX (Mac OS) and this makes Mac OS and iDVD to use
lot's of temp files - AND they can not be addressed to any other hard disk at all.
More RAM - will not help
External/Second hard disk will if You first formatte it as Mac OS Extended and
move material over to this (or use it as Start-up hard disk)
External Start-up hard disk must be FireWire - NO USB2 will do this.
Must be Mac OS Extended formatted
Western Digital - My Book Serie - Can't do this.
My Lacie - works gladly as secondary start-up hard disk.
Yours Bengt W -
CUPS Error message when printing from some applications
Hi. I've got an issue when printing from some apps, but not others. Up to a few months ago everything was fine, then it started when Word would not print direct to my printer (Epson Stylus Pro 3880), not a big deal as I don't use it a lot and could print it through Safari if needed. Then more worryingly as a designer I found that PDFs stopped printing direct too, again I can print through Safari and Preview. Last night I installed a firmware update and now InDesign (CS4) is refusing to print!! Not great as printing via Safari/Preview doesn't give me the same level of control over my prints. Just checked both Illustrator and Photoshop and they both print okay. I get the same error code each time "error: /usr/libexec/cups/filter/pstoraster failed" Does anyone know what could be causing this?
Thanks in anticipation. Dcytan,
As Matt pointed, an application printing to CUPS controls only the format of the input. It has no direct control over the chain of filters inside the printing pipeline. Acrobat isn't coded to use pstoraster, it is simpling submitting postscript to the print queue. In an un-molested Apple supplied CUPS setup, that works fine.
What is going on is that the CUPS system configuration got mangled by some third party bits. In the Unix tradition, the configuration is fairly transparent, in the form of plain text files. In particular, in /usr/share/cups/mime you will find out exactly how the filter pipeline is configured via a table of what filter to use to convert data between two mime types. So we can inspect how the filters are setup and how a broken pstoraster is getting into the chain.
I don't have a handy "before mangling" state, but I can clearly see the Apple specified filters to be invoked when the input data is application/postscript (in apple.convs). I can also see a conflicting filter definition referencing the broken pstopdf (in mime.convs) but with a higher precedence, overriding the apple specified filter. This is why, in reference to your points #1 and #2, simply removing pstoraster fails, because the filter configuration is what needs fixing.
On my system, I found the pstoraster filter to be a shell script referencing a MacPorts install of ghostscript. I've since removed MacPorts, but that evidentally left the CUPS configuration in this broken state. Without knowing exactly how the CUPS system was put into the broken state, fixing it can be a bit tricky. Another posting suggested replacing the broken pstoraster with the Apple supplied equivalent of pstocupsraster. That might work, but it would be better to simply remove the conflicting filter specification, which on my system is this bit in /usr/share/cups/mime/mime.convs:
# pstoraster is part of GPL Ghostscript...
application/vnd.cups-postscript application/vnd.cups-raster 100 pstoraster
Removing that will restore the Apple specified filter chain for postscript input. With the filter specification gone, you are free to remove the pstoraster filter itself.
On wating for Adobe to fix this...
Acrobat provides enough things to scream about without pinning non-Acrobat problems on it as well. Not only is this problem not the fault of Acrobat, but suggesting that Acrobat should reach into a CUPS system broken by some unknown third party and fix it is only going to complicate the situation by having two third party products trying to un-do each other's configuration of a system resource. Do you really trust Adobe to fiddle with system components it doesn't own? No, I didn't think so. Adobe installers and updaters have enough trouble with the stuff they do own.
So, why does this problem only seem to affect Acrobat (your point #3)? I suspect it is simply that Acrobat is in the minority of submitting Postscript to the print queue. Any print job produced via CoreGraphics APIs is going to enter the system via a different path (namely, PDF), but the Postscript method is completely legitimate and any application that submits Postscript will be affected in the same way as Acrobat.
I hope this sheds some useful light on what is really going on with this problem.
-john -
Error message when Sync from itunes.
I have 2 TVs, both have the latest update, iTunes 8, using AE for WIFI and both streaming. Both units have been working great for over a year now.
One of the unit is now freezing up after about 1hr of use... I get this error message from iTunes when trying to Sync the unit:
"The AppleTV is not responding.
Check that any firewall software running on this computer has been set to allow communication on port 3689."
Never got this message before, trying to figure out where could I find the setting for any firewall software.???
I reset my WIFI network (WEP)
I did a soft and hard reset of the TV.
Don't know what to do any more.... Might be the unit going bad but I wanted to see if anyone had any suggestion.
Here is my setup:
iTunes 8
AE for WIFI
latest update on TV
Sys Pref> Security>firewall> allow all incoming connections
PowermacG5, 10.5.5
Streaming from the G5
Thanks.
FWell, just talked to Applecare and they are sending a replacement unit. Looks like after over one hr of troubleshoot it is an hardware problem.
F -
Idoc with error message when coming from middleware but not in we19
Hi Experts
I am facing a very strange issue !
I have a Z - Idoc type and corresponding inbound function module for creating schedule lines i.e. doing something what me38 does.
When my middleware i.e. Mercator Websphere is sending the idocs, they fail with the error message in the status record as
Field EKET-MENGE (19) does not exist in the screen SAPMM06E 1117.
But when I try processing the same idoc using we19, the scheduling lines are created and the schedule agreement is changed.
Is there any difference between we19 and when idocs come from the middleware ?
Points would be rewareded if useful answers received.
Regards
ShubhankarWell i think that the problem is with your BDC. there is an option to use standard size in BDC. I think your table control falls short of 19 rows in your program. Please see the thread below and incorporate the same changes in your BDC. I think u might need to record the BDC again.
Re: BDC tabel control for QE01
DATA OPT TYPE CTU_PARAMS.
OPT-DEFSIZE = 'X'.
CALL TRANSACTION 'FB01' USING ITAB OPTIONS FROM OPT.
Maybe you are looking for
-
Problem with UNIQUE field parameter in Release 2
(using Enterprise Manager) I started with 9i Release 1 and began creating tables, setting a field called ID to not null, primary key, and unique. No problem in Release 1. I updated to Release 2 (removed Release 1 and fresh-installed Release 2), and a
-
Error while changing PO in SRM extended classic Version 5.0
Hi Guys, we are facing issue while changing PO in SRM , this is extended classic with version 5.0. The system status is active() is error message and PO remains unchanged. Kindly help to resolve this issue. we have an approval for even PO if a user c
-
ME51(2/3/4)N Reset release purchase requisition
Hello, I need to reset the issue of the purchase request after a specific condition occurs. To reset the issue I found the user exit EXIT_SAPLMEREQ_010 (Includes ZXM02U12 MEREQ001 and extension). I first used this function: CALL FUNCTION 'ME_RE
-
I'm using CS4 design standard and my serial no. is invalid when I've changed computer. I have deactivated the suite on my previous pc. Please advice.
-
Firefox remmembered my logins with 3.6.13. After upgrade, no logins are3 filled in when I go to the site. I tried looking at my profile. The only profile I can find is the one created by 10.0 and it obviously doesn't contain my old login info. Is the