Error message when booting Satellite P series - "Exiting PXE-ROM"
A while ago, I accidentally deleted the active partition to my hard drive. OOps. That is not very nice, because even though I wanted to clean out the drive and start fresh, the laptop would not recognize a hard drive any more. I live in the british virgin islands where we've got lots of rum and sand but no computer parts! So I bought a new hard drive, and it did not solve the problem. Turns out that drive was no good. Bummer. I was recently in California (lots of computer parts there) and had some tech people confirmed the drive was bad and yet another drive was put in. Unfortunately the people there did not have time to fix the laptop before I left. Now I'm pretty certain that the Hard drive is good.
So now I have a good drive, but whenever I try to boot, I get stuck at the following message:
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810 PCI fast ethernet controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-MOF: Exiting PXE ROM.
NO matter what boot sequence I use (I can get to the setup), I can't get the computer to boot to any CD. I even tried to put a version of Ubuntu on a pen drive to try and boot to that. Nothing Every time I get the same message.
If I remove the hard drive, I get the same message, except it repeats itself every few seconds. With the HD in it only does it once.
What should I do now?
The PXE-ROM message appears because the notebook tries to boot from the LAN.
We can speculate why the notebook want to boot from the LAN.
Either the other devices like HDD and CD/DVD drive dont function correctly, controllers are not recognized by BIOS or there is a simply wrong booting order.
If you want to boot from the HDD or ODD you can press the F12 immediately after notebook starting and the boot menu should appears. Then you could choose the right boot device.
Anyway, if its not able to choose such device you should access the BIOS and should set the BIOS to the default settings and save these settings!
Good luck
Similar Messages
-
Error messages when booting up
Receive 3 error messages when booting up PS using Win 8. "Could not load the FastCore Routines Module, could not load the MMX Core, could not load the Multiprocess Support Module." Any explanation?
Ah-ha! Seems there are two Adobe program folders, one under Program Files and one under Program Files (x86). I did not know about the one under Program Files.
According to System Info:
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Creative Cloud app keeps wanting to update Photoshop CC but keeps failing. The error code is U44M1P7.
Following is all of the System Info, showing the third-party plug-ins that I installed a few hours ago from onOne and Topaz. I can't see anything odd in this, and System Info says all the plug-ins loaded.
Thanks for your help.
Quote
Adobe Photoshop Version: 14.1.2 (14.1.2 20130923.r.427 2013/09/23:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 3093 MHz
Built-in memory: 6088 MB
Free memory: 4429 MB
Memory available to Photoshop: 5289 MB
Memory used by Photoshop: 59 %
Image tile size: 1024K
Image cache levels: 4
Display: 1
Display Bounds: top=0, left=0, bottom=900, right=1600
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=2108
gpu[0].RectTextureSize=8192
gpu[0].Renderer="Intel(R) HD Graphics 2000"
gpu[0].RendererID=258
gpu[0].Vendor="Intel"
gpu[0].VendorID=32902
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.17.10.3347"
gpu[0].Driver="igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd32"
gpu[0].DriverDate="20131031000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLSupported=0
gpu[0].CUDASupported=0
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Intel Build 9.17.10.3347"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[512]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[1024]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[41]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
Serial number: 96040202581963319193
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: C:\Users\RUSSEL~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 1.35T, 1.10T free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Installed components:
ACE.dll ACE 2013/07/14-12:09:50 79.543790 79.543790
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdobeLinguistic.dll Adobe Linguisitc Library 7.0.0
AdobeOwl.dll Adobe Owl 2013/03/03-12:10:08 5.0.13 79.533484
AdobePDFL.dll PDFL 2013/03/13-12:09:15 79.499517 79.499517
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1786
AdobeXMP.dll Adobe XMP Core 2013/03/13-12:09:15 79.151481 79.151481
AdobeXMPFiles.dll Adobe XMP Files 2013/03/13-12:09:15 79.151481 79.151481
AdobeXMPScript.dll Adobe XMP Script 2013/03/13-12:09:15 79.151481 79.151481
adobe_caps.dll Adobe CAPS 7,0,0,21
AGM.dll AGM 2013/07/14-12:09:50 79.543790 79.543790
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
aif_core.dll AIF 5.0 79.534508
aif_ocl.dll AIF 5.0 79.534508
aif_ogl.dll AIF 5.0 79.534508
amtlib.dll AMTLib (64 Bit) 7.0.0.169 BuildVersion: 7.0; BuildDate: Mon Apr 8 2013 2:31:50) 1.000000
ARE.dll ARE 2013/07/14-12:09:50 79.543790 79.543790
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2013/07/14-12:09:50 79.543790 79.543790
BIBUtils.dll BIBUtils 2013/03/19-12:09:02 79.535293 79.535293
boost_date_time.dll DVA Product 7.0.0
boost_signals.dll DVA Product 7.0.0
boost_system.dll DVA Product 7.0.0
boost_threads.dll DVA Product 7.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.6.30929 2.1.6.30929
CITThreading.dll Adobe CITThreading 2.1.6.30929 2.1.6.30929
CoolType.dll CoolType 2013/07/14-12:09:50 79.543790 79.543790
dvaaudiodevice.dll DVA Product 7.0.0
dvacore.dll DVA Product 7.0.0
dvamarshal.dll DVA Product 7.0.0
dvamediatypes.dll DVA Product 7.0.0
dvaplayer.dll DVA Product 7.0.0
dvatransport.dll DVA Product 7.0.0
dvaunittesting.dll DVA Product 7.0.0
dynamiclink.dll DVA Product 7.0.0
ExtendScript.dll ExtendScript 2013/03/21-12:10:31 79.535742 79.535742
FileInfo.dll Adobe XMP FileInfo 2013/03/19-12:09:02 79.151561 79.151561
filter_graph.dll AIF 5.0 79.534508
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
imslib.dll IMSLib DLL 7.0.0.116
JP2KLib.dll JP2KLib 2013/02/19-12:28:44 79.248139 79.248139
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OMP Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1785
mediacoreif.dll DVA Product 7.0.0
MPS.dll MPS 2013/03/15-13:25:52 79.535029 79.535029
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
ONCore7.dll ONCore 7.0.0.0
ONCore8.dll ONCore 7.0.0.0
ONCoreFoundation7.dll ONCoreFoundation7 7, 0, 0, 0
ONCoreFoundation8.dll ONCoreFoundation7 7, 0, 0, 0
ONDocument7.dll ONDocument 7.0.0.0
ONDocument8.dll ONDocument 7.0.0.0
ONProxySupport7.dll ONProxySupport 1.0.0.0
ONProxySupport8.dll ONProxySupport 1.0.0.0
PatchMatch.dll PatchMatch 2013/06/11-12:08:08 79.542390 79.542390
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC CC
Plugin.dll Adobe Photoshop CC CC
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 4.0.1.34
PSArt.dll Adobe Photoshop CC CC
PSViews.dll Adobe Photoshop CC CC
SCCore.dll ScCore 2013/03/21-12:10:31 79.535742 79.535742
ScriptUIFlex.dll ScriptUIFlex 2013/03/21-12:10:31 79.535742 79.535742
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
updaternotifications.dll Adobe Updater Notifications Library 7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 7.0.1.102
WRServices.dll WRServices Mon Feb 25 2013 16:09:10 Build 0.19078 0.19078
Required plug-ins:
3D Studio 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Accented Edges 14.0
Adaptive Wide Angle 14.0
Angled Strokes 14.0
Average 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Bas Relief 14.0
BMP 14.0
Camera Raw 8.0
Camera Raw Filter 8.0
Chalk & Charcoal 14.0
Charcoal 14.0
Chrome 14.0
Cineon 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Collada 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Color Halftone 14.0
Colored Pencil 14.0
CompuServe GIF 14.0
Conté Crayon 14.0
Craquelure 14.0
Crop and Straighten Photos 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Crop and Straighten Photos Filter 14.0
Crosshatch 14.0
Crystallize 14.0
Cutout 14.0
Dark Strokes 14.0
De-Interlace 14.0
Dicom 14.0
Difference Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Diffuse Glow 14.0
Displace 14.0
Dry Brush 14.0
Eazel Acquire 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Embed Watermark 4.0
Entropy 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Extrude 14.0
FastCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Fibers 14.0
Film Grain 14.0
Filter Gallery 14.0
Flash 3D 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Fresco 14.0
Glass 14.0
Glowing Edges 14.0
Google Earth 4 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Grain 14.0
Graphic Pen 14.0
Halftone Pattern 14.0
HDRMergeUI 14.0
IFF Format 14.0
Ink Outlines 14.0
JPEG 2000 14.0
Kurtosis 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Lens Blur 14.0
Lens Correction 14.0
Lens Flare 14.0
Liquify 14.0
Matlab Operation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Maximum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Mean 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Measurement Core 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Median 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Mezzotint 14.0
Minimum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
MMXCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Mosaic Tiles 14.0
Multiprocessor Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Neon Glow 14.0
Note Paper 14.0
NTSC Colors 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Ocean Ripple 14.0
Oil Paint 14.0
OpenEXR 14.0
Paint Daubs 14.0
Palette Knife 14.0
Patchwork 14.0
Paths to Illustrator 14.0
PCX 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Photocopy 14.0
Photoshop 3D Engine 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Picture Package Filter 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Pinch 14.0
Pixar 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Plaster 14.0
Plastic Wrap 14.0
PNG 14.0
Pointillize 14.0
Polar Coordinates 14.0
Portable Bit Map 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Poster Edges 14.0
Radial Blur 14.0
Radiance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Range 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Read Watermark 4.0
Reticulation 14.0
Ripple 14.0
Rough Pastels 14.0
Save for Web 14.0
ScriptingSupport 14.0
Shake Reduction 14.0
Shear 14.0
Skewness 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Smart Blur 14.0
Smudge Stick 14.0
Solarize 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Spatter 14.0
Spherize 14.0
Sponge 14.0
Sprayed Strokes 14.0
Stained Glass 14.0
Stamp 14.0
Standard Deviation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
STL 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Sumi-e 14.0
Summation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Targa 14.0
Texturizer 14.0
Tiles 14.0
Torn Edges 14.0
Twirl 14.0
Underpainting 14.0
Vanishing Point 14.0
Variance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Variations 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Water Paper 14.0
Watercolor 14.0
Wave 14.0
Wavefront|OBJ 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
WIA Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Wind 14.0
Wireless Bitmap 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
ZigZag 14.0
Optional and third party plug-ins:
Perfect Batch 8 8.1.0
Perfect BW 8 8.1.0
Perfect BW 8 Filter 8.1.0
Perfect BW 8 Smart Filter 8.1.0
Perfect Effects 4 4.0.4
Perfect Effects 4 Filter 4.0.4
Perfect Effects 4 Smart Filter 4.0.4
Perfect Effects 8 8.1.0
Perfect Effects 8 Filter 8.1.0
Perfect Effects 8 Smart Filter 8.1.0
Perfect Enhance 8 8.1.0
Perfect Enhance 8 Filter 8.1.0
Perfect Enhance 8 Smart Filter 8.1.0
Perfect Mask 8 8.1.0
Perfect Mask 8 Filter 8.1.0
Perfect Mask 8 Smart Filter 8.1.0
Perfect Portrait 8 8.1.0
Perfect Portrait 8 Filter 8.1.0
Perfect Portrait 8 Smart Filter 8.1.0
Perfect Resize 8 8.1.0
Perfect Resize 8 Engine Automation 8.1.0
Perfect Resize 8 Engine Filter 8.1.0
Perfect Resize 8 Filter 8.1.0
Topaz Adjust 5 10.0
Plug-ins that failed to load: NONE
Flash:
Kuler
Adobe Exchange
Installed TWAIN devices: NONE -
Error Messages when booting up Pavillion ZV5014EA
Hi there,
I have been having trouble with my HP Pavillion zv5014EA laptop. I replaced the harddrive with a Western Digital Blue Eide a couple of years back after the original hard drive failed.
On boot up I've been getting one of three messages which I've detailed below. Trouble is I'm not sure whether they relate to components of the HP notebook or the WD harddrive! I've tried installing the WD Lifeguard Diagnostics program for the harddrive and it passes both the quick and extended test.
Could anyone help me interpret these error messages?
1) First Message:
Intel UNDI, PXE-2.0 (build 082)
Copyright (c) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
2) Second Message:
A disk read error occured
Press Ctrl+Alt+Del to restart
3) Third Message:
Phoenix cME FirstBIOS Desktop Pro
Copyright 1985-2002 Phoenix Technologies Ltd.
All Rights Reserved
Build Time: 02/16/04 16:31:02
CPU = Mobile Intel (R) Pentium (R) 4 CPU 2.40GHz
640k System RAM Passed
1150M Extended RAM Passed
512k Cache SRAM Passed
System BIOS shadowed
Video BIOS shadowed
Fixed Disk 0:
ATAPI CD-ROM: SD-R6252
Mouse initialized
ERROR
0200: Failure Fixed Disk 0
Press <F1> to resumeYou're very welcome, Emma:
Either the hard drive is bad (even though the tests say otherwise), or the hard drive controller on the motherboard has failed and the motherboard would need to be replaced.
I'm really thinking the drive is bad, or you wouldn't even be able to run tests on it, but I am not a computer repar technician by trade.
Replacing the motherboard on that old notebook is not worth the money.
Even if you cannot afford a new notebook (or don't want to spend a lot of money on one), you would be better off getting a refurbished notebook that would be newer and better than your current one for the price of replacing the motherboard.
Paul -
Getting weird error message when booting up our computer
when booting up our iMac, we get a gray screen with an error message in 4 languages saying: "you need to restart your computer"
upon restarting, we keep getting the same message.
at the same time we noticed that the screen was very fuzzy... I re-starting holding commandoption+pr to re-set the pram. that worked to get the screen clear, but i still ended up on the same message.
after a few re-starts, the screen went back to the fuzzy view.
I have also already checked the led lights on the back to assure that the power supply was working appropriately, and i got all 3 lights ON and solid. the 4th light (overheating) was not coming on...
any ideas or recommendations??
Tks
LeoWhat you are seeing is called a 'Kernal Panic'.
What is a Kernel Panic?
http://docs.info.apple.com/article.html?artnum=106227
Try this:
Repairing permissions is an important part of regular maintenance, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two.
Background information here:
http://docs.info.apple.com/article.html?artnum=25751
and here:
http://docs.info.apple.com/article.html?artnum=302672
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.
More useful reading here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417 -
Udev-acl error message when booting after removing consolekit
Hi all,
I remove consolekit (using pacman -Rdds consolekit) after the announcement, but when I reboot I see a lot of error messages (although my system boots OK):
Nov 1 19:43:42 localhost systemd-udevd[1122]: failed to execute '/usr/lib/udev/udev-acl' 'udev-acl --action= --device=': No such file or directory
Sure enough, no udev-acl executable under /usr/lib/udev
any idea on how to get rid of this annoying message on booting?Interestingly problem not there on my 32 bit system on my netbook, only on my 64-bit [multilib] desktop
-
Error Message when booting from System CD's
Ill advised I put a OSX disk in my hardly used iMac CRT G4 with 64meg of RAM. I did not know about the firmware upgrade required. Discovering my error I tried to use the System Recovery / Install CDs that came with the machine.
When booting from the CD all goes well until about 50% into the boot and then the following error appears on the screen
interfaceLib -- MgmError with a button to reboot the machine and make sure that the C button is held down on the keyboard. BUT the mac is trying to boot from the CD. Holding down the C button makes no difference. Holding down the shift key (preventing the extentions) gets past the error BUT the system restore or system install programs will not run.
Help! I am really stuckNot only were you suppose to update your firmware, you also needed to purchase more RAM. The minimum RAM requirement for OS X is 128mb. However, Cat System users strongly recommend 256mb+.
Suggest you check out the following links & see the section on "Tray Loaders".
iMac (CRT) (FAQ)>
User-Contributed Tips & Answers>Fixing iMac(CRT) firmware/OS X problems
Firmware Problem Solver Thanks to Giles Kennedy.
Good luck. -
32bit Windows 7 and error message shown on Satellite T series
Help needed for this computer dummy.
I started to install 64 bit windows 7 then clicked cancel midway through, after I realised that perhaps this might require too much RAM.
Now getting persistent error message (F3- F200-0002). What should I do? (need explicit instructions as relatively inept)It is really stupid situation now.
As far as I know this notebook has no optical disc drive so for OS installation you must try to use HDD image.
Try again to install it using F8 at start-up.
If this will not work I am afraid you have destroyed recovery image and only solution for you is to order new one under https://backupmedia.toshiba.eu/landing.aspx
You can install it if you connect external USB optical disc drive. -
I get this error message when I try install update for CD-Rom drive ,
I get message when i try to install firmware update WinExec: Function Failed
If !HPSUFlag Then RunShell("C:\Users\Mr.KEG\AppData\Local\Temp\pft198C.tmp\hpprobar.exe", "TSST TS-T633A DVD-R/RW Drive Firmware Update", "", @HIDDEN, @NOWAIT)
IQ506T Touchsmart 64 bit/ Vista home Premuin
How do I resolve this?If it were me? I'd not bother updating the DVD drive firmware unless I knew I had a problem that it resolved.
-
How to get rid of error messages when booting Windows Vista on a Mac
I know there's a way, I've seen a page where there were step by step instructions on HOW TO do it. I just can't seem to find it now.
Hi and welcome to Discussions,
doing some guessing 'Unrecognized partition table for Drive 80' error ?
Have a look here for solution: http://www.lancelhoff.com/unrecognized-partition-table-for-drive-80/
Or use the BCD approach described in here: http://discussions.apple.com/thread.jspa?messageID=6265406
Hope it helps
Stefan -
Laptop mode -- where to find error messages on boot
Hi guys,
I get some error messages when booting. I have the time to read that they are related to laptop-mode, but they quickly disappear.
I have activated the ENABLE_LAPTOP_MODE_TOOLS in my laptop-mode.conf file, but I can't find the error messages in /var/log :
/var/log » ll nico@cotier
total 2152
-rw-r--r-- 1 root users 24082 20 mars 11:30 Xorg.0.log
-rw-r--r-- 1 root users 24084 20 mars 10:35 Xorg.0.log.old
-rw-r--r-- 1 root users 28050 1 juin 2013 Xorg.1.log
-rw-r--r-- 1 root users 27492 1 juin 2013 Xorg.1.log.old
-rw-r--r-- 1 root bumblebee 13679 1 juin 2013 Xorg.8.log
-rw------- 1 root utmp 18816 20 mars 10:18 btmp
-rw------- 1 root root 32032 20 mars 11:29 faillog
drwxr-xr-x 2 root root 4096 16 juin 2013 httpd
drwxr-sr-x+ 3 root systemd-journal 4096 1 juin 2013 journal
-rw-r--r-- 1 root root 292292 20 mars 11:29 lastlog
drwxr-xr-x 2 root root 4096 14 mars 2013 old
-rw-r--r-- 1 root root 159892 19 mars 14:55 pacman.log
-rw-r--r-- 1 root root 77572 5 oct. 00:47 pm-powersave.log
-rw-r--r-- 1 root root 3586 1 juin 2013 slim.log
drwxr-xr-x 2 root root 4096 9 mars 2013 speech-dispatcher
-rw-rw-r-- 1 root utmp 1745280 20 mars 11:45 wtmp
Do you know where they might be?
Thanks!grep all these logs and systemd's journal.
If you have 'quiet' on the kernel line of your bootloader, remove it.
Last edited by karol (2014-03-20 11:52:42) -
Get error message when exiting premier Pro wont save file
I am getting an error message when I exit adobe premier pro it wont save the file and the program locks up. I even uninstalled an reloaded the program CS5.5 vrs. still get the same error can anyone help?
You have not provided any system information or other technical details, so we can't know anything. Either way, ask in the Premiere Pro forum.
Mylenium -
I get Exit code 20 error message when trying to install Master Collection 5.5. Please assist.
Installation and launch log errors | CS5, CS5.5, CS6, CC -
https://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html -
"NTLDR is missing" error message when trying to boot R&R Recovery from USB HDD? !
Does anyone know what/why I am getting a "NTLDR is missing" error message when trying to boot from USB HDD? I copied my backup to a USB HDD and made it bootable via R&R but I am still getting this error. Help!
I have a T61 if that helps any.
Brad
Brad R
T61 4GB RAM Intel T8300the master boot record (MBR) needs to be repaired for that to work.
what OS are you using?
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600 -
"Inaccessible boot device" error message when I try to boot up.
Greetings, I recently upgraded to Windows 10, and I wanted to do a factory reset yesterday. I did this, and when it tried to boot up after it was finished I got the error message "Inaccessible boot device", and then my computer kept on restarting itself over and over, and never getting into the OS properly. I am using a Portege R705-P35. I tried searching for the device drivers to install on a USB and booting from this, but my computer could not boot from this properly. So i believe my problem is related to the device driver. What is the exact driver I need to boot up? I checked the Toshiba site and there was a list of about 25 drivers for my PC, and I'm not sure which would work. All help is greatly appreciated on this
I have excatly the same issue on my WT8-A. I have been running Windows 10 as an Insider for months on the device, and after RTM decided to do a full reset. I now get the same message as the OP saying "INACCESSIBLE BOOT DEVICE" I now have an unusabe device. Please help.
-
Error Message when I boot iTunes in Windows
This is the error message.
The registry settings used by the iTunes drivers for importing and burning CDs are DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
I've reinstalled iTunes and still get this message. Once I click okay it goes to my iTunes screen and everything appears to play correctly however each time I boot iTunes I get this same error message. Thoughts?
Also, recently my DVD/ROM stopped working and in another discussion with a different solutions page I discovered that the upper and lower filters are missing in my registry that is associated with the DVD/rom drive making the drive unable to read CDs or DVDs. Could this have something to do with the recent behavior of my iTunes program?The registry settings used by the iTunes drivers for importing and burning CDs are DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
First try rebooting the PC (very important) and then doing a repair install of iTunes. In Add/Remove programs, select itunes, click "Change" and then click "Repair".
If no joy with that, check for a device filter conflict in your registry, as per the following document:
iTunes for Windows: Troubleshooting CD issues caused by device filters
Maybe you are looking for
-
Creating MS- Access data base from the Internal tables data of an ABAP Prog
Hi, I have a requirement where I have to create Access tables from the Internal tables of ABAP program. The tables are like Project systems Header data, WBS elements data, Netwrok data, Activity data, Milestone data and Project revunes. I will have t
-
Can anyone help with my Linux issues?
I have Linux Ubuntu v9.04. I hate it. I'm really new to it and I don't know how to use it. My major issue is that I can't watch viedos! I have Mozilla Firefox. When I type in about:plugins, I get this lovely little thing: Shockwave Flash File name:
-
No default applications to open items with varied extentsions
Not being the most technologicaly advanced human here...I repeeatedly am unable to open downloaded files with any extensions other than the basic ones. Right now there are desktop files with .asf, .exe,.wmv extensions that when I try to open them I g
-
I have some database related questions
hey all i am currently designing a java GUI program for a dvd renting shop. this program obviously needs a databse, i was just wondering how much possibly a database on a home pc could hold data because this shop have about 15000 DVD title and about
-
Hi all, I am using WLS6.1 sp2 running on solaris. I would like to know how I could configure my MDB and the message sender(JMSConnectionFactory) so that messages will only be reloaded after the server startup class has completed its execution? Thanks