Error message when burning HD with iDVD

When i try to burn a HD movie directly from iMovieHD( v. 5,02) with iDVD( v. 5.0.1), i get an error message code OX8002006D, followed by another:
"Burning Finished.---errors were found during burning process."
and "there was a problem during multiplexing/burning"
and the disk is ejected blank.
With a Standard Definition movie, using the same DVD-R or DVD+R disks(4X) and same procedure, i have no problem. The movie was only about 2 minutes long with about 19 GB available.
Anybody out there who knows what's wrong?
Hans

There are a bunch of folders within your home folder, you may want to decide what exactly you want to back up or not.
Besides your personal folders (Desktop, Documents, Movies, Music, Pictures), you may want to decide whether you need to back up the library folder. The library folder generally contains preferences for most of your applications, and also caches and applications support files. These can become really big in some cases (Mine is more than 8GB, will not fit on a dual layer DVD). And the Library>Caches folder contains temporary files that will change from time to time, this might be the cause of your previous error since the shortcut is no longer valid.
Once you chose your files and make sure they will fit on your blank CD/DVD, you can just do what you did before, drag the folders to a Burn folder, make sure you are not running any other apps, so they won't be modifying the files.
There are programs you can use to backup to CD/DVD, Disc burner like Toast will span across several discs if the data does not fit on one. For a more automated solution, Carbon Copy Cloner (http://www.bombich.com/software/ccc.html) can backup to disc images which you can then burn to discs. I personally don't know a lot backup programs that provide good support for CD/DVDs, so I'll leave this to other folks.
If you are going to backup regularly, I would recommend spending some money on an external drive. You can find quite a few free software for automated backup and saves money and time on burning CD/DVDs. Plus you have the advantage of being able to boot from the external drive should anything bad happened to your internal one.

Similar Messages

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

I get an error message when installing itunes with windows 8, error message is error occured while attempting to create the directory C:\program file(x86)\common files\apple\mobile device support\sync services\schemas\outlook.syncschema

I keep getting an error message when installing iTunes with windows 8

See the second box in Troubleshooting issues with iTunes for Windows updates.
tt2

Error message when backing up with time on external hard drive

I'm running 10.6.8 OSX & wondering why I get an error message when backing up with time machine onto an external hard drive. Please help! Error message states time machine could not back up & to try again later.

Says "The back up was not performed because an error occurred while copying files to the backup disk.
"The problem may be temoporary. Try again later to back up. If the problem persists, use Disk Utility to repair back up disk."

Error message when backing up with Deja Vu

Hi,
I am getting this error message when backing up with Deja Vu
symlink(/,/Volumes/Backup HD/Volumes/Server HD) failed at /usr/local/bin/psync line 240.
symlink(/var/clamav/.spamassassin,/Volumes/Backup HD/private/var/amavis/.spamassassin) failed at /usr/local/bin/psync line 240.
Below is the line 240 of /usr/local/bin/psync
symlink($slink, $dpath) or warn "symlink($slink,$dpath) failed"; ###js added $opt_a and warning
Anyone has an idea?
Cheers
Ben

The mail system can be backed up with mailbfr and the resulting backup subsequently with any decent backup software. mailbfr will make sure the mail system is stopped while backing up.
A server is always tricky to backup, because it is always in a "fluctuating" state. Ideally all services should be stopped before a backup. Some will not cause major issues, others like mail will. Unless you have some sort of raid setup, where you can take a disk offline for backup purposes, you will always have to be very careful.
I would look for service specific scripts on an as needed basis. There are some around for SQL for example.

How do I deal with this error message when burning DVD's: The disc can't be burned, because the device failed to calibrate the laser power level for this media.

I am getting this error message when trying to burn a DVD: The disc can’t be burned, because the device failed to calibrate the laser power level for this media. iMac, Mac OS X 10.6.8 Memorex DVD-R 12x Any ideas?

First, try a different batch of recordable DVDs. If you still have problems, you may want to make an appointment at the genius bar and have it checked. The drive may be failing.

Getting error message when burning DVD

I keep getting an error message when I try to burn my DVD in iDVD 08. I have imported the movie in quicktime format from iMovie HD and everything works fine until I go to burn the project. I renders everything else but when it get to the movie it has an error and cancels the burn.

Suggestion: Not a bad idea to test the disc image with apple's dvd player app prior to burning.
Click Here
I prefer to use Toast for burning an image to Dvd-R (verbatim at 4x or slower for best results).
Click Here
Not my personal favorite choice ... however it is possible to burn thru apple's disc utility like this:
Click Here:
Hope these help but if not just come on back.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

Error message when burning a disc of photos

I was trying to burn a disc of a large number of photos - around 400, and I got this error message: "The burn to the HL-DT-ST DVDRW GS23N drive failed. The disc drive didn’t respond properly and can’t recover or retry." I did a sample burn of about 5 or 6 photos and it worked fine, but this large project failed. I have a total of 1200 pictures I'm trying to burn. Any advice? Thanks for your help. I have spent hours trying to get this project done. It looks like it is in the "preparing to burn" stage for 10 or so minutes, then when it gets ready to burn, I get the failure message. Thanks again!

Take your choice:
Bad discs
Dust bunnies in drive blocking laser
Drive failing
Crashed/corrupt firmware controlling drive
Crashed system component
Try different brand of discs and/or slower burn speed
You don't say anything about your model computer. With some you can reset software. Of course sometimes restarting a computer can help.
Intel-based Macs: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/ht3964 Apple Portables: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/HT1411 Apple Computers: Troubleshooting the slot-loading SuperDrive - http://support.apple.com/kb/HT2801
Failing all those it is not uncommon for optical drives to need replacing every 5 years or so.

Error message when burning Home Folder backup disk

I got this error message when trying to burn a backup disk (cd-rw) of my Home Folder. Could somebody please help me figure out what this means? -
The operation cannot be completed because one or more required items cannot be found.
(Error code -43)
Could not open the data fork of "<unable to get file path>" (-43).
Any help would be greatly appreciated.
iMac Intel Core Duo Mac OS X (10.4.4)
iMac Intel Core Duo Mac OS X (10.4.4)

There are a bunch of folders within your home folder, you may want to decide what exactly you want to back up or not.
Besides your personal folders (Desktop, Documents, Movies, Music, Pictures), you may want to decide whether you need to back up the library folder. The library folder generally contains preferences for most of your applications, and also caches and applications support files. These can become really big in some cases (Mine is more than 8GB, will not fit on a dual layer DVD). And the Library>Caches folder contains temporary files that will change from time to time, this might be the cause of your previous error since the shortcut is no longer valid.
Once you chose your files and make sure they will fit on your blank CD/DVD, you can just do what you did before, drag the folders to a Burn folder, make sure you are not running any other apps, so they won't be modifying the files.
There are programs you can use to backup to CD/DVD, Disc burner like Toast will span across several discs if the data does not fit on one. For a more automated solution, Carbon Copy Cloner (http://www.bombich.com/software/ccc.html) can backup to disc images which you can then burn to discs. I personally don't know a lot backup programs that provide good support for CD/DVDs, so I'll leave this to other folks.
If you are going to backup regularly, I would recommend spending some money on an external drive. You can find quite a few free software for automated backup and saves money and time on burning CD/DVDs. Plus you have the advantage of being able to boot from the external drive should anything bad happened to your internal one.

Error messages when burning to discs.

I have one of the original Macminis with only 256 Mb Ram, running 10.4.11 and have been very content with it until recently. When trying to burn Slideshows to disc from iDVD, or backing up to disc from iTunes or iPhoto I find it commences the operation, then ejects the disc with the following message "Burn Failed. The burn to the Matshita DVD-R Uj-835F drive failed. The device failed to calibrate the laser power level for this media." Instinctively I feel this means that the laser in the Superdrive is kaput. Is this a correct assumption, and is there anything I can do about it without sending off the Service Centres?
Grateful for all help.

The first possibility to consider before a serious hardware failure in the drive is that the lens in dirty - this can create the error message you see. Given the mini seems a little prone to the ingress of small particles of debris I would therefore suggest you try an inexpensive lens cleaner.
If it turns out the drive truly is defective, my recommendation would not be to send it off for repair, but simply replace the drive with a Firewire external DVD burner. That would generally be of very similar cost (or actually less) than a repair, but provide you with a higher performance unit which is less fussy on media.

Error message when burning dvd

I have a flat panel 17" iMac with a superdrive. I have recently tried to back-up data onto a dvd. When I hit the burn button I soon get an error message. When I eject the dvd and put it back in to play nothing happens and the dvd is ejected only when I open iTunes. On a third and forth attempt the dvd gets spit out without any burn attempt.
Strangely, the first dvd I put in that was not readable on my machine I put in a Windows machine, which appears to read the dvd and I see the folders that I tried to burn, but obviously cannot open the files because it is a Windows machine.
I have read the discussions and dvd issues seem to be rife. I thought I had applecare but it appears it hasn't been registered and this issue is being addressed with apple. So I have not managed as yet to get any apple support.
Can anyone shed any light on my problem?
Thanks
PS: The reason for the back-ups is that I am soon going to upgrade to Tiger. I see from discussions that issues about dvds are rife.

I didn't note the message I'm afraid. However I have just tried to burn a dvd again and got the message 'An error occurred while burning the disc. This disc cannot be used.' I have tried the burn with two different dvds and I don't think the discs are the wrong ones. One was DVD-RW and the other was DVD-R. I recall that on another occasion there was an error number, which might have been 303, but I can't be sure of that figure.
Whilst on burning to disc, I want to make an image of a folder. I follow the instructions of navigating to the folder and click on it but the resulting image is only of the folder and not its contents. Am I doing something wrong here too?
Thanks.

Error message when burning discs on a MacBook and MacPro Desktop

I have encountered a problem burning a CD-R with the MacBook. I created 12 image files (JPEG) totaling 48 MB. I placed them in a Burn Folder and tried to burn them to a CD-R. I recevied the following error message "Burning the disc failed because an unexpected error occurred (error Code 0x80020000). The same problem occurred on my MacPro desktop. I spoke with an Apple technician. She had me reset the hardware on my desktop. When that did not work she told me the disk was bad. I tried a different brand of CD-R and a DVD disk with the same results. She suggested that I reinstall the operating system. Since it happened on both of my Apple computers it seems to me that the problem is related to a software bug, since it is unlikely that both machines went bad at the same time. The MacBook is only 3 months old and the MacPro desktop a little over a year old. Today I discovered that the desktop would burn a CD-R if I had only one image file in the Burn folder. Has anyone run into this problem? Does anyone have a solution?

Thank you for your reply. I have some additional information that may help you. I initially found that if I tried to burn 12 JPEG image files to a CD-R I received the error message I reported in my first post. If, however, I only tried to burn 3 files to the CD-R, they were burned onto the CD and I was able to retrieve them. If I tried to burn more than 3 files it did not work.
I took my MacBook to the Apple store Genius counter yesterday to get some help and was able to exactly reproduce the errors. The Apple techs suggested replacing the CD/DVD drive. I am waiting for the new drive to arrive. In the mean time, I discovered that if I included any number of files and sub-folders in a single main folder, and then tried to burn that main folder it worked. I was subsequently able to successfully burn a single folder containing 300MB of files and sub-folders. This seems to me to be a bug in the Mac OS, especially since it happened in exactly the same way on 2 different late model Macs. Hope this helps. Let me know if you can reproduce my experience or have any additiona information.

Error message when burning a CD

Attempting to burn a CD from my playlist in iTunes, but keep getting an iTunes error message that says "The attempt to burn a disc failed. The burn failed because of a medium write error".

Take your choice:
Bad discs
Dust bunnies in drive blocking laser
Drive failing
Crashed/corrupt firmware controlling drive
Crashed system component
Try different brand of discs and/or slower burn speed
You don't say anything about your model computer. With some you can reset software. Of course sometimes restarting a computer can help.
Intel-based Macs: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/ht3964 Apple Portables: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/HT1411 Apple Computers: Troubleshooting the slot-loading SuperDrive - http://support.apple.com/kb/HT2801
Failing all those it is not uncommon for optical drives to need replacing every 5 years or so.

CS6 Error Message When Burning a Blu Ray Project to DVD

Hi,
I'm trying to burn a Blu Ray project to DVD and I'm getting this message when I try to build the project:
The project is an excerpt from a larger one and contains only 2 video files and no menus. However it's particularly worrying because the project from which this is an excerpt is large and complex. I have created it as a Blu Ray project but my final deliverable is DVD. I really don't want to have to rebuild as a DVD project because it took half a day to link up all of the menus and chapters.
Is there something I need to do in my encode settings?
Thanks in advance.

Thanks for your reply John.
It's extremely frustrating that this is the case. I'd have started with a DVD project in the first place had I not read this: http://helpx.adobe.com/encore/using/building-finished-project.html , specifically the following excerpt:
"You can build the same project to DVD and Blu‑ray formats no matter which format you select in the New Project or Project Settings dialog box. Encore makes the appropriate adjustments to transcode the elements to the correct format."
Reading that gave me the confidence to go ahead and build as a Blu Ray. I now have to find another half day to rebuild the project as a DVD.
Thanks again for the information.

Error message when burning .img file

I got this message when trying to burn a .img file: "Unable to burn "disk 4" - the device failed to respond properly . unable to recover or re-try.
this happened twice in a row, I suppose that means it wasnt a defective DVD (using verbatim)
I am running Tiger 10.4.7 with a Dual 1.8 Gz Processor.

Hi there
It would appear you are trying to furnish an image and you are trying that by replying via email with the image either embedded or as an attachment.
Unfortunately those don't survive the trip into the forum post. If you have an image to show, please visit the forum web page where you started this thread and use the camera icon to insert the image.
Cheers... Rick

Error message when burning HD with iDVD

Similar Messages

Maybe you are looking for