Error message when business completion of a production maintenance order

Hello,
When we try to do the business completion of an order, we get the following error message. We did all the steps that is mention in the error message long text, but still, we can't close this PM order... any suggestions how to resolve this issue ?
Unprocessed future change recs for order 13101294 prevent del. flag/completion
Message no. CO688
Diagnosis
There are still future change records or error records to be processed from the confirmation for the confirmation processes in order 13101294. Possible confirmation processes are:
Automatic goods receipt
Backflushing
Calculation of actual costs
Data transfer to HR
System Response
You are not meant to set the deletion flag/'completed' status for orders with future change records that have not been processed.
Procedure
You should process the open future change records using
Predefined confimration process or
The CORUPROC program, by dispatching it in Customizing in a background job (dispatch background jobs: dispatching processes).
Check if incorrect goods movements or incorrect actual cost calculations exist for the order, and reprocess these if necessary:
Reprocessing incorrect goods movements
Reprocessing incorrect actual cost calculations

1) CORUPROC: done
2) IW46:
I have about 50 of thoses messages:
Reprocessing incorrect confirmation:
BAPI2010021219323230 Confirmations ordres de travail/service  BATCHADM     12.02.2010
BAPI2010021619324630 Confirmations ordres de travail/service  BATCHADM     16.02.2010
BAPI2010022519341330 Confirmations ordres de travail/service  BATCHADM     25.02.2010
BAPI2010022619332130 Confirmations ordres de travail/service  BATCHADM     26.02.2010
BAPI2010030119322730 Confirmations ordres de travail/service  BATCHADM     01.03.2010
BAPI2010030419330430 Confirmations ordres de travail/service  BATCHADM     04.03.2010
3) COFC
I have many logs about availability control: ex: Item 001 Ordre 13101294 budget exceeded
4) COGI
No errors

Similar Messages

  • Error Message when installing All In One Product

    I am having to re-install my HP Officejet 6500 e709a software.  I am getting the following error message when I try to install it.  Anyone have any suggestions on how I can correct this?
    Thanks,
    JN
    This question was solved.
    View Solution.

    Hi @MattNC79,
    Welcome back to the HP Support Forums! I understand you are trying to reinstall the software and drivers for your HP Officejet 6500 to your Computer running the  Windows 8.1 Operating system. When you attempt to install you get an error message with an error code. I would like you to click on the link below to get started:
    HP Printers - Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) ...
    Please let me know the outcome, I will watch for your reply.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP error message when trying to detect my product

    using HP pavilion Elite 150f desktop, when I click on HP website to find my products, I enter my product # but I get an error message saying Blocked or Not Trusted or "RETURN" code:"1624" I have never seen this before, I am trying to locate my care packs that I purchased in August 5th of this year and still not recognised, keep phoning HP techs but they tell me it has been taken care of yet they keep charging my credit card for the same care packs.
    Can anyone help with this error, I am entering the correct product # although it is not connected at my home here.

    Hi @emma22 ,
    I have sent you a private message. If you are not sure how to check your private messages then this post has instructions that will guide you through the process.
    Thanks for visiting the HP Support Forum
    I work for HP. However I speak only for myself, not for HP nor anyone else

  • Error message when 'submitting' completed survey.

    One survey participant got an error message as she was submitting the filled survey online. The message told her to press "back" on her browser and resubmit. She did that and it threw her back onto the first page of the survey... any ideas what is wrong please? And how I can retrieve her survey? (I checked - it did not get uploaded).
    Thank you!

    Thanks Lumi
    I hope its working fine with you, my client is thinking about upgrading their PS from 9.1(PTools 8.50.10) to PS 9.2(PTools 8.53) and I wanted to make sure that TES can still talk to the new PS env with no issues.
    Seems i also need to research Informatica as well, as we have WS connection between Infomatica and the PS env. do you have Informatica as well? if so, is everything working as expected.
    appreciate this Lumi.
    Thanks

  • Error Messages when Transport Process Chain to Production

    I am able to transport three related process chain to Q, but failed in Prodtion. Can anyone look at my error messages? Thank you!
    Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC
    Version 'M' of chain USFCMD was saved without checking
    Results of check for process     in chain  :
    Results of check for process     in chain  :
    Results of check for process TRIGGER START_USLDFORECT_MD in chain USFCMD:
    Version 'M' of chain USLDFC was saved without checking
    Results of check for process     in chain  :
    Results of check for process     in chain  :
    Results of check for process TRIGGER START_USLDFORECT in chain USLDFC:
    Version 'M' of chain USLDFORECT was saved without checking
    Results of check for process     in chain  :
    Results of check for process     in chain  :
    Results of check for process ODSACTIVAT USDSOFC_ACTIVATE in chain USLDFORECT:
    Results of check for process ODSACTIVAT USDSOFC_ACTIVATE in chain USLDFORECT:
    Results of check for process TRIGGER START_USLDFORECT_TD in chain USLDFORECT:

    Try to transport the process chain by removing the process chain from schedule.
    Go to Process chain select execution in menu..go for option "Remove from schedule"
    It may help you.
    Regards,
    Srinivas.

  • Error message when uploading completed form.

    I am getting an intermittent error when filling out and retrning a from via acrobat.com.  Somtines it works and the form data appears on the website but othertimes the user get a message that data collection is closed.  Once that happens the user will get this message every time they try to send the file:
    You have already submitted the data on this form and it is waiting to be sent. Further changes are not allowed until the prior data is sent.
    The strange thing is the data is actualy transfered to the web site but the user has no way to know that.
    Is this a bug in the adobe.com data collection site?

    Besm Allah Alrahman Alraheem
    thanks very much for concern and reply
    Alhamd for Allah
    I found the solution
    I download another web browser firefox
    and I adjust form builder Edit---preferences----runtime------web browser location-----( the path of fire fox)
    and Idownload the initiator
    then
    forms has been run
    Alhmdo for Allah

  • Adobe tech support advised that I uninstall my CS 5 and Adobe Reader / Editor products as two weeks ago I began receiving error messages when trying to use these products . They said call back after uninstall for reinstall assistance ,but no ones there ?

    cant download and install CS 5 reactivation .  I have the serial number

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • When I try to save a photo, I get error message Could not complete your request because of a program error.  What's wrong?

    I edit a photo and when I click Save As, I get error message "Could not complete your request because of a program error."    I exit Elements, try again, same error. 
    In past I had this problem but it resolved when rebooted PC.  This time, PC reboot does not help.
    I cannot save anything i do in elements!!
    What's wrong?  Any suggestions how to fix this?   Anyone know what the program error is

    Please mention your PSE version and underlying OS.
    Also, it would be of great help in resolving the issue if you can upload a snapshot of error message.
    Regards
    Kishan

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • "Business Catalyst" error message when starting Dw

    Hello,
    Since a yesterday, I have this error message (in french) when starting Dreamweaver.
    "Lors de l'exécution de onload dans BusinessCatalyst.htm, la ou les erreurs Javascript suivante ont eu lieu - Dans le fichier "Business Catalyst : bcinit is not defined".
    A few days ago, I started to have some errors message when opening any page of my website.
    "Les traducteurs suivants n'ont pas été chargés à cause des erreurs :
    ASP.htm : dispose d'informations de configuration invalides.
    ColdFusion.htm : dispose d'informations de configuration invalides.
    PHP_MySQL.htm : dispose d'informations de configuration invalides."
    I've open an old website, those error messages still existing.
    Does anybody have an idea ?
    Thanks for your help.
    Hugo

    BC Status
    Nancy O.

  • I get this error message when I try to back up my laptop:  Time machine could not complete the backup.  The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle is already in use.  Anyone know how to fix it?

    I get this error message when I try to back up my laptop:
    ' Time machine could not complete the backup.  The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle' is already in use. "
    Anyone know how to fix it?

    Reboot the TC.. Sometimes you need to reboot the whole network.
    This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
    Read C12 in pondini.
    http://pondini.org/TM/Troubleshooting.html
    C17 can be related I think.

  • Error message when processing in the Business Warehouse

    hi everybody!!
    this was the error i got.plz let me know the correction process.plz explain stepwise.
    thank u,
    jack.
    Error message when processing in the Business Warehouse
    Diagnosis
    An error occurred in the SAP BW when processing the data. The error is documented in an error message.
    System response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Update

    Hi,
    This issue is in BI when you are trying to load data from one object to other Object
    example: ods to cube
    We need the Log information which you can find that in the monitor screen Status tab "Push button"
    Regards
    Hari

  • Error message when running Business rules

    Hello,
    We are having the following error message when launching the business rules; cannot calculate - analytic server error (1013131): Failed to start Asynchonous thread. When looking att he Essabse log, we find the following errors around the same time we got this error:
    [Wed May 06 22:01:45 2009]Local/ESSBASE0///Info(1051037)
    Logging out user [brlpo], active for 63 minutes
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
    Received client request: Get Substitution Variable (from user [essbaseadmin])
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
    Substitution variable AOP.Finance.CurrFcst does not exist
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
    Error 1051083 processing request [Get Substitution Variable] - disconnecting
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
    Received client request: Get Substitution Variable (from user [essbaseadmin])
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
    Received client request: Get Substitution Variable (from user [essbaseadmin])
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
    Substitution variable AOP.Finance.Curryr does not exist
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
    Error 1051083 processing request [Get Substitution Variable] - disconnecting
    Would you have an idea of reason of error code?
    Thierry

    Hi,
    Looks like the substitution variables its looking for are missing.
    Can you check that?
    Regards,
    Amol

  • I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

    I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

    Try Here  >  http://pondini.org/TM/C12.html
    More Info here  >  http://pondini.org/TM/Time_Capsule.html

  • When creating a slideshow I get an error message when it's almost done:  the operation couldn't be completed- osstatus error 9459

    When creating a slideshow I get an error message when it's almost done:  the operation couldn't be completed- osstatus error 9459.  Help!

    but I tried that earlier and the same thing happened.
    Why not give us a list of all the things you've tried so we don;t waste your time - and ours - making suggestions that you know won't work?
    Regards
    TD

Maybe you are looking for

  • How to populate the data in to customised cube

    hi, guys, i have customised the infocube (0PUR_C01)by adding the additional info object , i want populate the data (using updaterule)  in to infocube with out loosing current data for hte added info object . can any help this, how to write updaterule

  • Having problems switching itunes from pc to mac

    I downloaded the migration assitance and tried to use, but nothing happened. I then tried to use external storage to transfer my itunes from my pc to new mac and pc said that the itunes file was to large to download. I am stuck! Does anyone have an i

  • Need a SQL query(Pls Its urgent)

    Hi, I want a SQL query for the foll.. Details r below.. Table AFPFTRAN BU TRansactiondate Amt 13202 10-04-05 10,000 13203 11-05-05 20,000 13202 20-04-05 5,000 Table AFGENCOD BU Clerk Name Clerk Code 13202 Amit TFBG 13203 Anand TFMG I want a query to

  • Spry - Javascript Error!

    Hello everyone! I included an spry accordion in my latest site. The accordion is working fine but it has a javascript error: element has no properties var child = element.firstChild; This is in the 'SpryAccordion.js', I haven't touched this .js, anyb

  • Why does AttachMovie not work after a loadClip?

    Hi, i am trying to attach a movieclip from my library to the movieclip that is loaded. It does not seem to work. I only can attach it to the _root! In this example i have an movieclip with an idintifier link of 'round'. As you can see i can approach